Samsung Syncmaster Ld220z User Manual

							Using the product3-2
3-2 Standard Signal Mode Table
 The LCD monitor has one optimal resolution for the best visual quality depending on the screen size due to the inherent 
characteristics of the panel, unlike for a CDT monitor.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting 
the resolution to the optimal resolution of the product.
 
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from 
the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on. 
Therefore, configure it as follows referring to the User Manual of the graphics card.
 
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle 
and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This 
frequency is called the vertical frequency. The vertical frequency is represented in Hz.
DISPLAY MODEHORIZONTAL 
FREQUENCY (KHZ)VERTICAL 
FREQUENCY  (HZ)PIXEL CLOCK (MHZ)SYNC POLARITY (H/
V)
VESA, 640 x 480 31.469 59.940 25.175  -/-
VESA, 800 x 600 35.156 56.250 36.000  +/+
VESA, 800 x 600 37.87960.317 40.000 +/+
VESA, 1024 x 768 48.363 60.004 65.000  -/-
VESA, 1280 x 800 49.702 59.810 83.500  -/+
VESA, 1280 x 960 60.000 60.000 108.000 +/+
VESA, 1280 x 1024 63.981 60.020 108.000 +/+
VESA, 1440 x 900 55.935 59.887 106.500 -/+
VESA, 1600 x 1200 75.000 60.000 162.000 +/+
VESA, 1680 x 1050 65.290 59.954 146.250 -/+
VESA, 1920 x 1080 67.500 60.000 148.500 +/+
 
						

							3-3Using the product
3-3 Installing the Device Driver
 If you install the device driver, you can set up the appropriate resolution and frequency for the product. The device driver is 
included on the CD-ROM supplied with the product. If the supplied drive file is corrupted, please visit a service center or 
Samsung Electronics website(http://www.samsung.com/), and download the driver.
 
1.Insert the driver installation CD-ROM into the CD-ROM drive.
2.Click on Windows Driver.
3.Complete the remaining installation steps according to the instructions displayed on the screen.
4.Select the model of your product from the model list.
5.Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings. For more information, 
refer to the document about the Windows operating system.
 
						

							Using the product3-4
3-4 Installing the USB Driver
To use the touch screen monitor, the USB driver must be installed. The device driver is included on the CD-ROM supplied with 
the product.
If the supplied drive file is corrupted, please visit a service center or Samsung Electronics website(http://www.samsung.com/), 
and download the driver.
1.Connect the monitor to your PC using the USB cable.
2.Insert the driver installation CD-ROM into the CD-ROM drive.
3.Click on Touchscreen Driver. The driver installation will start automatically. (Double-click on the file in the Touchscreen 
Driver folder.)
4.Complete the remaining installation steps according to the instructions displayed on the screen.
5.After installation is complete, select Computer Management  -> Device Manager -> Human Interface Device  to check if 
the driver has been installed successfully.
 
						

							3-5Using the product
3-5 Product Operating Buttons
Product Operating Buttons
 Touch one of the operating buttons lightly.
The LED buttons appear.
 
ICONDESCRIPTION
MENUPress this button to view the On Screen Display (OSD).
This button is also used to exit the OSD or to return to a higher-level OSD menu.
* OSD Adjustment Lock
This function locks the OSD in order to maintain the current settings or to prevent 
the settings from being changed by another person
On: If you press and hold the MENU button down for 5 seconds, the OSD Adjust-
ment Lock function is activated.
Off: If you press and hold the MENU button down for 5 seconds again, the OSD 
Adjustment Lock function is disabled.
 Even if the OSD Adjustment Lock function is activated, users can adjust the 
brightness and contrast and can set up the adjustment function assigned to 
the [ ].
 
Users can set the Customized Key to one of the following functions. If the user 
presses the Customized Key [ ] after setting it, the configured function will be 
performed
•  mode:  -  -  - 
•  mode :  -  -  - 
 You can set the function of the Customized Key by selecting 
-> in the OSD.
 
▲/▼Use these buttons to navigate the menu or to adjust a value in the OSD. 
When OSD is not on the screen, push the button to adjust volume.
 
						

							Using the product3-5
Use this button to select a function
If you press the [  ] button when there is no OSD, the input signal (Analog/
HDMI) is switched. When the input signal is switched by pressing [ ] button or 
the product is turned on, a message displaying the selected input signal appears 
at the top left of the screen.)
AUTOPress [AUTO] button to adjust the screen settings automatically
 This function is only available in Analog mode. 
If the resolution settings are changed in the Display Properties, the AUTO adjust-
ment function is performed.
Press this button to turn the product on or off
Power LED
This LED is turned on when the product works normally. 
 For more information on the power-saving function, refer to the power 
saving function in More Information. When not using the product for a long 
time, unplugging the power cord is recommended to minimize power 
consumption.
 
Speaker
ICONDESCRIPTION
 
						

							3-6Using the product
3-6 Using the Screen Adjustment Menu (OSD: On Screen Display)
The Screen Adjustment Menu (OSD: On Screen Display) Structure
 PICTURE
TOP MENUSSUB MENUS
 PICTUREBrightness Contrast Sharpness MagicBright Picture Mode
MagicAngle Coarse Fine HDMI Black 
Level
 COLORMagicColor Red Green Blue Color Tone
Color Effect Gamma
 SIZE & POSITIONH-Position V-Position Image Size Menu H-Position Menu V-Position
 SETUP&RESETReset Language MagicReturn MagicEco Off Timer On/Off
Off Timer Setting Customized Key Auto Source PC/AV Mode Display Time
Menu Transpar-
encyLED On/Off LED Bright-
ness
 INFORMATION
 
MENUDESCRIPTION
Brightness Controls the screen brightness.
 • This menu is unavailable when  is set to  mode.
• Only Supported when
is set to .
 
Contrast Controls the contrast of the pictures displayed on the screen
 • This menu is unavailable when  is set to  or  
mode.
• This menu is unavailable when  is set to  mode or  mode.
• Only supported when
 is set to .
 
 
						

							Using the product3-6
Sharpness Controls the clarity of details of pictures displayed on the screen
 • This menu is unavailable when  is set to  or  
mode.
• This menu is unavailable when  is set to  mode or  mode.
• Only supported when
 is set to .
 
MagicBright Provides preset picture settings optimized for various user environments such as editing a document, 
surfing the Internet, playing games, watching sports or movies and so on.
• 
If the preset picture modes are not sufficient, users can configure the  and 
 directly using this mode.
• 
This mode provides the picture setting appropriate for editing a document and surfing the Internet 
(text + picture).
•
This mode provides the picture setting appropriate for playing games that include lots of graphics 
and that require a fast screen refresh rate.
• 
This mode provides brightness and sharpness settings similar to those of a TV for the best 
entertainment environment (movie, DVD, etc.).
• 
Controls the picture contrast automatically so that bright and dark pictures are balanced overall.
 
Supported when
is set to  and

is set to . 
Picture Mode The Monitor has four automatic picture settings (, ,  and ) 
that are preset at the factory. You can activate either , ,  or . You can select  which automatically recalls your personalized picture settings.
• 
Select this mode to view a sharper image than in Standard mode.
• 
Select this mode when the surroundings are bright. This also provides a sharp image.
•
Select this mode when the surroundings are dark. This will save power and reduce eye fatigue.
• 
Select this mode when you want to adjust the image according to your preferences.
 • This can only be set when the external input is connected through HDMI and  is set to .
• Supported when
is set to  and

is set to .
 
MENUDESCRIPTION
 
						

							3-6Using the product
MagicAngleThis feature allows you to see optimal screen quality according to your viewing position.
When viewing the screen at an angle from below, above or the side of the monitor, by setting the 
appropriate mode for each position you can obtain a similar picture quality as viewing the screen 
directly from the front.
 Set to  when viewing directly in front of the screen. 
•    - Select when viewing from the front position.
•    - Select when viewing from a slightly lower position.
•    - Select when viewing from the lower position.
•    -Select when viewing from the upper position.
•     - Select when viewing from the left or right position.
•  - When  is selected, settings for  is applied by default. 
Users can set suitable picture quality as needed.
 • This menu is unavailable when  is set to  or  
mode.
• Supported when
is set to  and

is set to .
 
Coarse Removes vertical noise lines (line pattern) from the screen.
The location of the screen may be changed after the adjustment. In this case, move the screen so 
that the screen is displayed at the center of the display panel using the  menu.
 This function is only available in Analog mode. 
Fine Removes horizontal noise lines (line pattern) from the screen.
If you cannot remove the noise completely with the  function, adjust the  and then 
use the  function again.
 This function is only available in Analog mode. 
HDMI Black Level
When a DVD or set-top box is connected to your TV via , it may cause a degradation in the 
screen quality, such as an increase in the black level, a low contrast, or discoloration, etc.,
depending on the external device connected. In this case, adjust the screen quality of your TV by 
configuring the .
• 
• 
 The  function is only enabled when the external device is connected via 
HDMI and the input signal is HDMI AV.
 
MENUDESCRIPTION
 
						

							Using the product3-6
 COLOR
 This is unavailable when  is set to  and  mode. 
 
						

							3-6Using the product
MENUDESCRIPTION
MagicColor Expresses natural colors more clearly without changing the picture quality using proprietary digital 
picture quality improvement technology developed by Samsung Electronics.
•  - Turns the MagicColor function off.
•  - You can compare the pictures processed by MagicColor with the original pictures.
•  - Provides a clearer picture including areas corresponding to skin color.
•  - Improves the chroma of pictures except for areas corresponding to skin color.
 
• Supported when
is set to  and

is set to . 
Red You can adjust the red color value of pictures according to your preference.
 • This menu is unavailable when  is set to  mode or  mode.
• Only supported when
 is set to .
 
Green You can adjust the green color value of pictures according to your preference.
 • This menu is unavailable when  is set to  mode or  mode.
• Only supported when
 is set to .
 
Blue You can adjust the blue color value of pictures according to your preference.
 • This menu is unavailable when  is set to  mode or  mode.
• Only supported when
 is set to .
 
Color Tone You can set the color temperature according to your preference.
•  - Sets the color temperature of the screen to a cooler color.
•  - Sets the color temperature of the screen to the standard color temperature.
•  - Sets the color temperature of the screen to a warmer color.
•  - Select this menu to set the color temperature manually.
If you do not like the preset color temperatures, you can manually adjust the colors of .
 • This menu is unavailable when  is set to  mode or  mode.
• Supported when
is set to  and

is set to .
 
Color Effect You can change the overall atmosphere by changing the color of pictures.
This menu is unavailable when  is set to  mode or  mode.
•  - Turns the color effect function off.
•  -Displays pictures in black and white. 
•  - Displays pictures in green mono color. 
•  - Displays pictures in aqua mono color. 
•  - Displays pictures in sepia mono color. 
 
• Supported when
is set to  and

is set to . 
Gamma Using this menu, you can change the intensity of the colors of medium brightness.
•  -  - 
 
• Only supported when
 is set to .