Samsung Syncmaster Ld190g User Manual

English
中国语
日本語
한국어
▷     
连接显示器之前，
   请您先参阅《用户指南》并安装 USB 显示器驱动程序。
▷      
Before connecting the monitor, 
    please refer to the User Guide and install the USB Monitor Driver first.
▷    ご使用前に本インストールガイドをご参照いただき、
     USBモニタードライバをインストールしてください。
▷    
사용전에 본 안내서를 참조하여 
     USB 모니터 드라이버를 반드시 설치한 후 사용하세요.
USB显示器安装指南
USB MONITOR 
INSTALLATION GUIDE
USBモニターインストールガイド
USB 모니터 설치 안내서
SyncMaster  LD190G 
SyncMaster  LD220 
SyncMaster  LD220G

BN68-02216B-00.indb   12009-03-05   �� 3:49:53
 

BN68-02216B-00.indb   22009-03-05   �� 3:49:53
 

English - 1
1.  Installation Requirements
▒ Recommended System Requirements
- CPU: Higher than Dual-Core 2.0 GHz- RAM: Higher than 1GB- Higher than USB 2.0
▒ Supported OS (Operating Systems)
WindowsXP    - Service Pack 1 or earlier: Not Supported- Service Pack 2 or later: Supported
2000- Service Pack 3 or earlier: Not Supported- Service Pack 4 or later: Supported
Server 2003Not Supported
VistaSupported
MacNot Supported
리리리Not Supported
Contents
The monitor can be operated with USB cable connection only....

English - 2
2. Connections
▒ Monitor connection with USB cable
1    Connect the power cord () to your monitor as shown above.2     Connect the USB cable () to monitor and PC as shown above.3     More than 2 monitors connection with USB cable.      Connect the USB cable () to two different monitors as shown above.       (LD220/LD220G models only)       Maximum of 4 monitors can be used at a same time with a serial USB conne\
ction.      Maximum of 6 monitors can be used at a same time with a parallel U\...

English - 3
▀ USB Driver online download
    
Visit the Download Center (http://www.samsung.com) and register your product.
▀ Display settings after program installation
   Applicable mode: Extend mode   Mode position: Right hand side of the Main Screen   Mode rotation: 0°
3. USB Monitor Driver Installation
Make sure to begin the installation after your PC has booted completely.
N  
If you turn off the monitor or remove the USB cable during installation, it may cause \
some error to your PC and the...

English - 4
4. Using the Monitor
1Click 'Start >Control panel > Appearance and Themes >Display'.2 Select 'Settings' tab.
3 Click second monitor icon and check 'Extend my windowsdesktop onto this monitor'. Then click 'Apply' button shown as below.
Display Properties
Drag the monitor icons to match the physical...

English - 5
1   
Because this USB monitor is recognized as a USB device, the DOS screen that appears for general monitors when a PC is booting up is not displayed.   - In order to view booting information (DOS), use D-SUB cable (Analog Signal) connection. 
2  USB monitor is not compatible to any software that requires 3D hardwa\
re acceleration.   - Real Player (Expansion mode is not supported.)   - Most 3D games   - Programs based on DirectX
3  Video Programs Support   - Power DVD : Win DVD(Version 5...

English - 6
QuestionAnswer
I cannot turn on the monitor. ▷  Connect the power cable again.
There is no image on the screen.▷   Unplug the power code and replug in.▷   Connect the USB cable again.▷   Install the USB driver.▷   As USB port can be unstable, reboot your PC.▷   PC's USB port may be faulty. Please try to connect different port.▷  USB monitor may not work on USB 1.0.▷   
Any input from mouse or keyboard will activate the display if it is under...

中国语 - 1
1.  安装要求
推荐系统配置░
- CPU:  双核 2.0 GHz 以上- 内存： 1GB 以上- USB 2.0 以上
支持的操作系统░
目录
本显示器可仅通过 USB 缆线连接进行使用，也可通过 D-sub 缆线连接进行使用。
N  
使用 USB 缆线连接显示器之前，请先安装 USB 显示器驱动程序。 可在随附的光盘中找到 USB 显示器驱动程序软件。
USB 显示器安装指南
1. 安装要求...................................1   推荐系统配置   支持的操作系统
2. 连接.......................................2   使用 USB 缆线连接显示器   使用 D-SUB 缆线连接显示器
3. 安装 USB 显示器驱动程序....................3
4. 使用显示器.................................4   多显示器配置   USB 显示器的显示信息设置   注
5. 问答.......................................6
-...

中国语 - 2
2. 连接
使用 USB 缆线连接显示器░
1    如上图所示，将电源线 () 连接到显示器。2    如上图所示，将 USB 缆线 () 连接到显示器和 PC。3    使用 USB 缆线连接两台以上的显示器。     如上图所示，将 USB 缆线 () 连接到两台不同的显示器。      (仅适用于 LD220/LD220G 型号）      通过串行的 USB 连接一次最多只可连接 4 台显示器。     通过并行的 USB 连接一次最多只可连接 6 台显示器。           有关更多信息，请参阅随附光盘中的《用户手册》。
          N  也可将鼠标、键盘和其他外部设备（DSC、MP3 和外部存储设备等）连接到显示器的 USB 端口。
使用 D-SUB 缆线连接显示器░
1    如上图所示，将电源线 () 连接到显示器。
2    如上图所示，将 D-SUB 缆线 () 连接到显示器和 PC。
 IN OUT
 IN IN OUT
 IN
LD190GLD220 / LD220G
A
CBBCAD
A
D
C
A
B

BN68-02216B-00.indb...