Samsung Syncmaster F2080 User Manual

Using the product3-2
F2380
Display ModeHorizontal 
Frequency (kHz)Vertical Frequency  
(Hz)Pixel Clock (MHz)Sync Polarity (H/V)
IBM, 640 x 350 31.469 70.086 25.175 +/-
IBM, 720 x 400 31.469 70.087 28.322 -/+
MAC, 640 x 480 35.000 66.667 30.240 -/-
MAC, 832 x 624 49.726 74.551 57.284 -/-
VESA, 640 x 480 31.469 59.940 25.175 -/-
VESA, 640 x 480 37.861 72.809 31.500 -/-
VESA, 640 x 480 37.500 75.000 31.500 -/-
VESA, 800 x 600 35.156 56.250 36.000 +/+
VESA, 800 x 600 37.879 60.317 40.000 +/+
VESA, 800 x 600...

3-3Using the product
 
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle 
and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This 
frequency is called the vertical frequency. The vertical...

Using the product3-4
3.Select the model of your product from the model list.
4.Complete the remaining installation steps according to the instructions displayed on the screen.
5.Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings. For more information, 
refer to the document about the Windows operating system.
3-4 Product Operating Buttons
Product Operating Buttons
IconDescription
MENUPress this button to view the On Screen Display (OSD).
This button is...

3-5Using the product
3-5 Using the Screen Adjustment Menu (OSD: On Screen Display)
The Screen Adjustment Menu (OSD: On Screen Display) Structure
Users can set the Customized Key to one of the following functions. If the user presses the 
Customized Key[ ] after setting it, the configured function will be performed
 -  -  - 
 You can set the function of the Customized Key by selecting SETUP&RESET -> 
Customized Key in the OSD.
 
When OSD is not on the screen, push the button to adjust brightness....

Using the product3-5
 PICTURE
MenuDescription
Brightness Controls the screen brightness.
This menu is unavailable when  is set to  mode.
Contrast Controls the contrast of the pictures displayed on the screen
This menu is unavailable when  is set to  mode.
This menu is unavailable when  is set to  mode or  mode.
Sharpness Controls the clarity of details of pictures displayed on the screen
This menu is unavailable when  is set to  mode.
This menu is unavailable when  is set to  mode or  mode.
MagicBright...

3-5Using the product
 COLOR
Fine Removes horizontal noise lines (line pattern) from the screen.
If you cannot remove the noise completely with the  function, adjust the  and then 
use the  function again.
 This function is only available in analog mode. 
Response Time Accelerates the response time of the LCD panel faster than the original response time so that moving 
pictures appear sharper and more natural.
• 
• 
•
 It is recommended setting the Normal or Faster when not viewing a movie....

Using the product3-5
 (This is unavailable when MagicBright is set to  mode.) 
 SIZE & POSITION
MenuDescription
MagicColor Expresses natural colors more clearly without changing the picture quality using proprietary digital 
picture quality improvement technology developed by Samsung Electronics.
•  - Turns the MagicColor function off.
•  - You can compare the pictures processed by MagicColor with the original pictures.
•  - Provides a clearer picture including areas corresponding to skin color.
•  -...

3-5Using the product
 SETUP&RESET
MenuDescription
H-Position Moves the position of the display area on the screen horizontally.
 This function is only available in analog mode. 
V-Position Moves the position of the display area on the screen vertically.
 This function is only available in analog mode. 
Image SizePC signals 
•  - The picture is displayed at the aspect ratio of the input signal.
•  - The picture is displayed in full screen regardless of the aspect ratio of the input signal.
 • A signal not...

Using the product3-5
 INFORMATION
Off Timer On/Off You can turn the Off Timer on or off.
•  - 
Off Timer Setting Turns the power off automatically when the configured time is reached.
Auto Source •  - The monitor automatically selects an input signal.
•  - Users have to manually select an input signal.
PC/AV Mode Set to PC when connected to a PC.
Set to AV when connected to an AV device.
 This function does not support analog mode. 
Display Time The OSD automatically disappears if no action is taken by...

3-5Using the product