Samsung Syncmaster Ex1920 User Manual

Major Safety Precautions1-3
 Caution
Usage Related
 Warning
Before cleaning the product, unplug the 
power cord.
• Otherwise, it may result in electric shock 
or fire.When cleaning the product, do not spray 
water directly over the product parts. 
• Make sure that water does not enter the 
product. 
• Otherwise, it may result in fire, electric 
shock or a problem with the product. 
Avoid spraying cleansing agent directly onto 
the product.
• This may result in discoloration or 
cracking of the exterior...

Major Safety Precautions1-3
 Caution
When thunder or lighting occurs, unplug the 
power cord and under no circumstance 
touch the antenna cable as this is danger-
ous.
• Otherwise, it may result in electric shock 
or fire.Avoid dropping an object over the product 
or cause impact to the product.
• Otherwise, it may result in electric shock 
or fire.
Avoid moving the product by pulling the 
power cord or antenna cable.
• Otherwise, it may result in electric 
shock, fire or a problem with the product 
due...

Major Safety Precautions1-3
Maintaining the Correct Posture when Using this Product 
Watching the product from too close a dis-
tance continuously may damage your eye-
sight.Avoid using a humidifier or cooker near the 
product.
• Otherwise, it may result in electric shock 
or fire.
It is important to give your eyes some rest (5 
minutes every hour) when viewing the prod-
uct screen for long periods of time.
• This will alleviate any eye strain.Since the display panel is hot after using it 
for a long...

Installing the Product2-1
2 Installing the Product
2-1 Package Contents
 • Unpack the product and check if all of the following contents have been included.
• Store the packaging box in case you need to move the Product at a later stage.
 
Type 1
Monitor & HAS stand
 The cleaning cloth is supplied with black high-glossy models only. 
Contents
Installation ManualProduct Warranty
(Not available in all locations) User Manual D-Sub Cable 
Power Cord Stand
OPTIONAL PARTS
HDMI Cable DVI Cable Cleaning Cloth...

Installing the Product2-1
Type 2
Monitor & Simple stand
 MagicRotation program can not be provided as Simple Stand does not support Pivot function. 
 The cleaning cloth is supplied with black high-glossy models only. 
Type 3
Monitor and HAS-USB stand
Contents
Installation ManualProduct Warranty
(Not available in all locations) User Manual D-Sub Cable 
Power Cord Stand Stand Connector
OPTIONAL PARTS
HDMI Cable DVI Cable Cleaning Cloth Stereo Cable
 

Installing the Product2-1
 The cleaning cloth is supplied with black high-glossy models only. 
Contents
Installation ManualProduct Warranty
(Not available in all locations) User Manual D-Sub Cable 
Power Cord Stand
OPTIONAL PARTS
HDMI Cable DVI Cable Cleaning Cloth Stereo Cable
USB Cable
 

Installing the Product2-2
2-2 Installing the Stand
 Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. 
HAS stand
Place a soft cloth over the table to protect the product and place the product onto the 
cloth so that the front of the product is facing downwards.
 Do not remove
the stopper pin before installing the base. 
Hold the main body of the product with your hand as shown by the figure.
Insert the stand base into the stand...

Installing the Product2-2
 Disassembly is in the reverse order of the assembly. 
After the installation of the base, stand the monitor up as shown in the figure. Now you 
can remove the stopper pin to adjust the stand.
- Caution
Avoid lifting the product holding only the stand.
When pivot the monitor from horizontal to vertical,tilt the monitor backward to maxium 
first.
  . Stand Stopper
 

Installing the Product2-2
Simple stand
Insert the Stand Connector into the Stand in the direction shown by the figure.
Check if the Stand Connector is firmly connected.
Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.
Place a soft cloth over the table to protect the product and place the product onto the 
cloth so that the front of the product is facing downwards.
 

Installing the Product2-2
 Disassembly is in the reverse order of the assembly.
 
Hold the main body of the product with your hand as shown by the figure.
Push the assembled stand into the main body in the direction of the arrow as shown in 
the figure.
- Caution
Avoid lifting the product holding only the stand.