Samsung Syncmaster E2220n User Manual

							Installing the Product2-3
2-3 Installing the Stand for the Wall Mount
This product provides a stand mount of 75 mm x 75 mm(3.0 x 3.0 inches) that complies with the VESA specifications.
HAS stand
Simple stand
1.Turn the product off and unplug the power cord from the wall outlet.
2.Place a soft cloth or cushion on a flat surface to protect the panel and place the product down on the cloth so that the front of 
the product faces downwards.
3.Separate the stand.
4.Align the groove of the part of the product that is to be connected to the stand with the groove in the stand (desk-top stand, 
wall mount stand or another stand) and firmly fix the stand by fastening the screw.
 • If you use a screw that is longer than the standard specifications, the inside of the product may be damaged.
• For wall mounts that are not compatible with the standard VESA specifications, the length of the screw may differ 
depending on the corresponding specifications.
• Do not use screws that are incompatible with the standard VESA specifications and do not assemble them using 
excessive force.
• This may result in damage to the product or injury due to the product falling.
• The company shall not be held liable for any damage or injury.
• The company shall not be held liable for any damage to the product or injury caused by using a stand that is not 
compatible with the specified specifications or due to an installation not performed by an authorized installation 
 Stand Mount
 Stand (Optional)
 
						

							Installing the Product2-3
engineer. 
• When installing the product using a wall mount, purchase a wall mount that provides at least 10 cm of space from 
the wall.
• The company shall not be held liable for any problems caused by using a stand that is not compatible with the 
specified specifications.
• Use the wall mount according to the international specifications.
 
 
						

							Installing the Product2-4
2-4 Connecting with a PC
 The connecting part may differ depending on the product model. 
1.Connect the product to a PC depending on the video output supported by the PC.
•  When the graphics card provides D-Sub
	Analog

output
• Connect the [RGB IN] port of the product to the [D-Sub] port of the PC with the D-Sub cable.
•  When the graphics card provides DVI	Digital
 output
•  Connect the [DVI IN] port of the product to the [DVI] port of the PC with the DVI cable.
 The DVI IN terminal is supplied for the digital (DVI)-dedicated models only. 
2.Connect one end of the power cord to the [POWER] port of the product and connect the other end of the power cord to the 
220V or 110V wall outlet.
(The input voltage is switched automatically.)
 When the product is connected to a PC, you can turn the product on and use it.
When both the DVI () and D-Sub () cables are connected, you can select the input signal 
						

							Installing the Product2-4
Digital> by pressing the[   ]button. POWER ON [ │ ] / OFF 
Switches the Power On/Off.
 Some of the models with HAS stand for special region  have this button.And some of the models with speaker have this 
button.
 
3.Connect the [AUDIO IN] port on the rear side of the monitor to the sound card of the PC.
 Applicable to the models that have speakers only. 
 
						

							Installing the Product2-5
2-5 Connecting an HDMI cable
1.Connect the HDMI output port of your digital output device to the [HDMI IN] port of the product using the HDMI cable.
 The HDMI IN terminal is supplied for the HDMI-dedicated models only.
 
 
						

							Installing the Product2-6
2-6 Kensington Lock
Kensington Lock
A Kensington Lock is an anti-theft device that enables users to lock the product so that they can safely use it in public locations. 
Since the shape and usage of the locking device may differ depending on the model and the manufacturer, for more information, 
refer to the User Manual supplied with the locking device. You have to purchase an additional locking device.
 The location of the Kensington Lock may be different depending on its model. 
Locking the product
1.Insert the locking part of the locking device into the hole of the Kensington lock of the product( ) and turn it in the locking 
direction( ). 
2.Connect the Kensington lock cable.
3.Tie the Kensington lock cable to a desk or heavy object.
 You can purchase the locking device from an electronics store, an online shop, or our service center. 
 
						

							Installing the Product2-7
2-7 Connecting Headphones
Connect your headphones to the Headphone connection terminal.
 Applicable to the models that have speakers only.
 
 
						

							Installing the Product2-8
2-8 Speaker
You can hear sound by connecting the soundcard of your PC to the monitor.
 Applicable to the models that have speakers only. 
 
						

							Installing the Product2-9
2-9 Connecting USB
 Applicable to the stand models that have USB ports only.  You can use a USB device such as a mouse, keyboard, Memory Stick, or external hard disk drive by connecting them to 
theDOWN port of the monitor without connecting them to the PC.
 
The  USB port of the monitor supports High-Speed Certified USB 2.0.
1.Connect the   UP port of the monitor and the USB port of the computer with the USB cable.
 
• To use   DOWN port, you have to connect the UP (Upstream Cable) to the PC.
• Make sure to use the USB cable supplied with this monitor to connect the monitors   UP port and your computers 
USB port.
 
2.Connect the   DOWN port of the USB monitor and a USB device with the USB cable.
3.The use procedures are as the same as those for using an external device connecting to the PC.High speed Full speed Low speed
Data Rate 480 Mbps 12 Mbps 1.5 Mbps
Power Consumption 2.5 W
(Max., each port)2.5 W
(Max., each port)2.5 W
(Max., each port)
 
						

							Installing the Product2-9
• You can connect and use a keyboard and mouse.
• You can play a file from a media device. 
(Examples of media devices: MP3, digital camera, etc.)
• You can run, move, copy or delete the files on the storage device.
(Examples of storage devices: external memory, memory card, memory reader, HDD-type MP3 player, etc.)
• You can use other USB devices that can be connected to a computer.
 
• When connecting a device to the   DOWN port of the monitor, connect the device using a cable appropriate to the 
device.
• (For the purchase of the cable and external devices, ask the service center of the corresponding product.)
• The company is not liable for problems or damages to an external device caused by using an unauthorized cable for the 
connection.
• Some products do not follow the USB standard, and it may cause a malfunction of the device.
• If the device malfunctions even if it is connected to the computer, contact the service center of the device/computer.