Samsung Syncmaster C27a750x User Manual

							617 Setup and Reset
7 
Setup and Reset
7.1 HUB
Configure the settings to use the HUB function on the product.
 zRefer to "2.1About "Central Station"" for details about how to use the  HUB function. 
zTo open the HUB  settings screen, press HUB  on the stand.  
7.1.1 Auto Wireless Detection
If the product is connected to a PC via Wireless USB, it will automatically detect the Wireless USB signal 
and change the input source to  Wireless USB mode.
Configuring Auto Wireless Detection
1Press [ ] on the product.
2Press [ ] to move to  SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  HUB and press [ ] on the product.
4Press [ ] to move to  Auto Wireless Detection  and press [ ] on the pr oduct. The following screen 
will appear.
zOff : Deactivate the auto wireless detection mode.
zOn : Automatically detect a Wireless USB signal and change the input source to  Wireless USB 
mode.
5Press [ ] to move to the option you want and press the [ ].
6The selected option will be applied.
7.1.2 Wireless Connection
You can view the status of the Wireless USB connection between the product and a PC.
Select the  Wireless Connection  option. The input source will change to  Wireless USB mode.
 zThe connection status will be shown even when the input source is not  Wireless USB mode.
zSelecting Wireless Connection  when a Wireless USB connection is established will change the 
input source to  Wireless USB mode.
 
m 
ReturnEnterAdjust







HUB
Auto Wireless Detection
Wireless Connection 
USB Connection 
Analog
HDMI
USB Super Charging
Wireless IDOff 
On
Disconnected
Disconnected
2II

Disconnected
 
						

							62
Setup and Reset
7
7 Setup and Reset
Activating Wireless Connection
1Press [ ] on the product.
2Press [ ] to move to SETUP&RESET and press [] on the product.
3Press [ ] to move to  HUB and press [ ] on the product. A  message will appear indicating that a 
Wireless USB  connection is established or disconnected.
4If a Wireless USB connection is established, press [ ] to move to  Wireless Connection and press 
[] . The input source will change to  Wireless USB mode. 
 The Wireless Connection  option is disabled if a Wireless USB connection is not established. 
7.1.3 USB Connection
You can view the USB cable connection status between the product and a PC.
 zThe connection status will be shown even when the input source is not  USB mode.
zSelecting the USB Connection  option when a USB cable is connected will change the input source 
to  USB  mode.
 
Configuring USB Connection
1Press [ ] on the product.
2Press [ ] to move to  SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  HUB and press [ ] on the product. A  message will appear indicating that a 
USB cable is connecte d or disconnected.
4If a USB cable is connected, press [ ] to move to  USB Connection and press [ ]. The input 
source will change to  USB mode.
m 
ReturnEnterMove







HUB
Auto Wireless Detection
Wireless Connection 
USB Connection 
Analog
HDMI
USB Super Charging
Wireless ID Off
 
Disconnected
Disconnected
2II Disconnected
Connected 

m 
ReturnEnterMove







HUB
Auto Wireless Detection
Wireless Connection 
USB Connection 
Analog
HDMI
USB Super Charging
Wireless ID Off
 
Connected
Disconnected
2II Disconnected
Disconnected 

 
						

							63
Setup and Reset
7
7 Setup and Reset
 The USB Connection option is disabled if a USB cable is not connected. 
7.1.4 Analog
You can view the Analog cable connection status between the product and a PC. 
 zThe connection status will be shown even when the input source is not  Analog mode.
zSelecting the Analog option when an analog cable is connected will change the input source to 
Analog mode.
 
Configuring Analog
1Press [ ] on the product.
2Press [ ] to move to  SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  HUB and press [ ] on the product. A message will appear indicating that 
an analog cable is connected or disconnected.
4If an analog cable is connecte d, press [ ] to move to Analog and press [ ]. The input source will 
change to  Analog mode.
 The Analog option is disabled if an analog cable is not connected. 
7.1.5 HDMI
You can view the HDMI connection status between the product and an AV device.
 zThe connection status will be shown even when the input source is not  HDMI mode.
zSelecting the  HDMI option when an HDMI cable is connected will change the input source to HDMI  
mode.
 
Configuring GHDMI
1Press [ ] on the product.
2Press [ ] to move to  SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  HUB and press [ ] on the product. A message will appear indicating that 
an HDMI cable is connected or disconnected.
m 
ReturnEnterMove







HUB
Auto Wireless Detection
Wireless Connection 
USB Connection 
Analog
HDMI
USB Super Charging
Wireless ID Off
Disconnected
Connected
2II Disconnected
Disconnected 

m 
 
						

							64
Setup and Reset
7
7 Setup and Reset
4If an HDMI cable is connected, press [ ] to move to HDMI and press [ ]. The input source will 
change to  HDMI mode. 
 The HDMI  option is disabled if an HDMI cable is not connected.
 
7.1.6 USB Super Charging
A source device's battery can be charged  quickly via USB 3.0 port on the product.
zData transmission is not available if USB Super Charging is on.
zTo enable standard charging  or data transmission, set USB Super Charging to off.
zThe input source does not need to be changed.
Configuring USB Super Charging
1Press [ ] on the product.
2Press [ ] to move to  SETUP&RESET, and press [ ] on the product.
3Press [ ] to move to  HUB, and press [ ] on the product.
4Press [ ] to move to  USB Super Charging, and press [ ] on the pr oduct. The following screen 
will appear.
zOff : Disable  USB Super Charging .
z1 Port: Enable a single USB 3.0 port (marked with a charging icon) for  quick battery charging.
 Quick battery charging is available via the USB 3.0 port (next to the HDMI port) only. 
z2 Ports: Enable two USB 3.0 ports fo r quick battery charging.
5Press [ ] to move to the option you want, and press [ ] .
ReturnEnterMove







HUB
Auto Wireless Detection
Wireless Connection 
USB Connection 
Analog
HDMI
USB Super Charging
Wireless ID Off
 
Disconnected
Disconnected
2II Connected
Disconnected 

m 
ReturnEnterMove







HUB
Auto Wireless Detection
Wireless Connection 
USB Connection 
Analog
HDMI
USB Super Charging
Wireless ID Off
 
Disconnected
Disconnected
Disconnected
Disconnected 
Off
1 Port
2 Ports
 
						

							65
Setup and Reset
7
7 Setup and Reset
6The selected option will be applied.
7.1.7 Wireless ID
Wireless ID is a unique ID assigned to a monitor. The "Samsung Central Station Setup" program reads 
the ID and identifies each of nearby monitors. The ID is shown in the "Samsung Central Station Setup" 
program and in th e lower part of the  HUB menu.
7.2 Eco Saving 
Adjust the power consumption of the product to save energy.
7.2.1 Configuring Eco Saving
1Press [ ] on the product.
2Press [ ] to move to  SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  Eco Saving and press [ ] on the product. The following screen will appear.
z75%: Reduce the power consumption of the product to 75%.
z50%: Reduce the power consumption of the product to 50%.
zOff: Deactivate power-saving mode.
4Press [ ] to move to the option you want and press the [ ].
5The selected option will be applied.
m 
ReturnEnterAdjust






SETUP&RESET
HUB 
Eco Saving
Language
PC/AV Mode 
Auto Source 
Display Time 
  
Off
75%
50%
0HQX7UDQVSDUHQF\ English
PC
Manual
20 secÛ
 
						

							66
Setup and Reset
7
7 Setup and Reset
7.3 Menu Transparency 
Set the transparency for the menu windows: 
7.3.1 Changing Menu Transparency
1Press [ ] on the product.
2Press [ ] to move to SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  Menu Transparency and press [ ] on the product. The following screen will 
appear.
4Press [ ] to move to the option you want and press the [ ].
5The selected option will be applied.
7.4 Language
Set the menu language. 
 zA change to the language setting will only be applied to the onscreen menu display.
zIt will not be applied to other functions on your PC. 
7.4.1 Changing the Language
1Press [ ] on the product.
2Press [ ] to move to  SETUP&RESET and press [ ] on the product.
m 
ReturnEnterAdjust






SETUP&RESET
HUB 
Eco Saving
Menu Transparency
Language
PC/AV Mode 
Auto Source 
Display Time 
   20 sec Off
PC
Manual
Off
OnÛ
m 
 
						

							67
Setup and Reset
7
7 Setup and Reset
3Press [ ] to move to Language and press [ ] on the product. The following screen will appear.
4Press [ ] to move to the option you want and press the [ ].
5The selected option will be applied.
7.5 PC/AV Mode
Set the input mode to  PC when the product is co nnected to a PC or to AV when the product is 
connected to an AV device.
 PC/AV Mode  is only available in  HDMI mode. 
7.5.1 Configuring PC/AV Mode
1Press [ ] on the product.
2Press [ ] to move to  SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  PC/AV Mode and press [ ] on the product. The following screen will 
appear.
4Press [ ] to move to the option you want and press the [ ].
5The selected option will be applied.
ReturnEnterMove






SETUP&RESET
òí
HUB 
Eco Saving
Menu Transparency
Language
PC/AV Mode 
Auto Source 
Display Time 
  HXWVFK
(QJOLVK
(VSDxRO
)UDQoDLV
,WDOLDQR
0DJ\DU
3ROVNL
3RUWXJXrV

§
Ê
È
È
Á
¿
À
6YHQVND
7
						

							68
Setup and Reset
7
7 Setup and Reset
7.6 Auto Source 
Activate Auto Source .
7.6.1 Configuring Auto Source
1Press [ ] on the product.
2Press [ ] to move to  SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  Auto Source and press [ ] on the product.  The following screen will 
appear.
zAuto : The input source is au tomatically recognized.
zManual: Manually select an input source.
4Press [ ] to move to the option you want and press the [ ].
5The selected option will be applied.
7.7 Display Time
Set the on screen display  (OSD) menu to automatica lly disappear if the menu is not used for a specified 
period of time. 
Display Time  can be used to specify the time after  which you want the OSD menu to disappear. 
7.7.1 Configuring Display Time
1Press [ ] on the product.
2Press [ ] to move to SETUP&RESET and press [ ] on the product.
m 
ReturnEnterAdjust






SETUP&RESET
Off
On
English
PC
HUB 
Eco Saving
Menu Transparency
Language
PC/AV Mode 
Auto Source 
Display Time 
  
Auto
Manual
Û
m 
 
						

							69
Setup and Reset
7
7 Setup and Reset
3Press [ ] to move to Display Time and press [ ] on the product. The following screen will 
appear.
4Press [ ] to move to the option you want and press the [ ].
5The selected option will be applied.
7.8 Key Repeat Time 
Control the response rate of a button when the button is pressed. 
7.8.1 Configuring Key Repeat Time
1Press [ ] on the product.
2Press [ ] to move to  SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  Key Repeat Time and press [ ] on the product. The following screen will 
appear.
zAcceleration , 1 sec , or 2 sec  can be selected. If  No Repeat is selected, a command responds 
only once when a button is pressed.
4Press [ ] to move to the option you want and press the [ ].
5The selected option will be applied.
ReturnEnterAdjust






SETUP&RESET
Off
On
English
HUB 
Eco Saving
Menu Transparency
Language
PC/AV Mode
Auto Source 
Display Time 
  
5 sec
10 sec
20 sec
200 sec
Û
m 
ReturnEnterAdjust
Key Repeat Time  
Off Timer On/Off
Off Timer Setting
Reset
  
Acceleration
1 sec
2 sec
No Repeat
SETUP&RESET
 
						

							70
Setup and Reset
7
7 Setup and Reset
7.9 Off Timer On/Off 
Enable or disable the off timer that automatically powers off the product.
7.9.1 Configuring Off Timer On/Off
1Press [ ] on the product.
2Press [ ] to move to  SETUP&RESET and press [ ] on the product.
3Press [ ] to move to  Off Timer On/Off and press [ ] on the product. The following screen will 
appear.
zOff : Deactivate the off timer so that the product does not power off automatically.
zOn : Activate the off timer so that th e product powers off automatically.
4Press [ ] to move to the option you want and press the [ ].
5The selected option will be applied.
7.10 Off Timer Setting 
The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the 
specified number of hours.
 This option is only available when  Off Timer On/Off is set to On. 
7.10.1 Configuring Off Timer Setting
1Press [ ] on the product.
2Press [ ] to move to  SETUP&RESET and press [ ] on the product.
m 
ReturnEnterAdjust
Key Repeat Time  
Off Timer On/Off
Off Timer Setting
Reset
  

Off 
On
SETUP&RESET
m