Samsung Syncmaster C23a750x User Manual

31
Using "Central Station"
2
2 Using "Central Station"
4Double-click the hub monitor to open the following screen.
If a connection is established between the product  and PC, [ ] will appear over the signal intensity 
bars as shown below and the product will display the PC screen. If [ ] does not appear, the 
connection is not established between the product and PC.
5Right-click in the  Connected Monitor  to open the menu page as below.
zDisconnect: Disconnect Wireless between the product...

32
Using "Central Station"
2
2 Using "Central Station"
zRename: Customize the name of the connected monitor.
 The program will automatically activate to allo w you to use the Wireless USB connection even 
when the "Wireless Display" window is closed.
 
Automatic/manual Wireless USB connection
Set  Auto Wireless Detection to On  under HUB in the on-screen display menu. A Wireless USB 
connection will automatically be established if the product is within 1.5 m from the PC. The first...

33
Using "Central Station"
2
2 Using "Central Station"
2.4 Utilizing "Central Station"
Central Station is only available when the product is connected to a PC via Wireless USB or a USB cable.
2.4.1 Using the Product as a USB HUB
Using the product as a hub, connect and use various source devices with the product at the same time.
A PC cannot connect to multiple source devices at the same time as it has a limited number of input/
output ports available. The HUB feature on the...

34
Using "Central Station"
2
2 Using "Central Station"
zAn external mass-storage HDD requires external power supply. Be sure to connect it to a power 
source.
 
Connect a mobile IT device such as an MP3 player or smart phone to the product when connected to a 
PC. This allows you to use the device from the PC or charge the battery on the device.
 zTo charge the battery of a device, be sure to connect the device to the blue USB 3.0 port on the 
left side of the product.
zBattery charging...

35
Using "Central Station"
2
2 Using "Central Station"
This is achieved by an internal chip that transmits data received via the LAN cable to the PC as a 
converted USB signal.
Connecting to a LAN via Wireless USB
Connecting to a LAN via USB cable
 This product cannot connect to multiple sour
ce PCs at the same time and vice versa.
 
2.5 Configuring the Central Station Monitor IP
1After installing the integrated driver for Central Station monitors , go to Control Panel   Network 
and...

36
Using "Central Station"
2
2 Using "Central Station"
network information such as the IP address to the PC, and the transmitted network information is 
automatically registered to the network settings on the PC. The DHCP service is convenient and useful 
especially in an environment where multiple PCs are used. Theoretically, the IP address changes each 
time the PC boots up (or an IP allotment request is sent); in many cases, however, the existing IP address 
is re-allotted. An Internet...

37
Using "Central Station"
2
2 Using "Central Station"
Select Properties   Internet Protocol Version 4 (TCP/IPv4)   Properties.
 
2.5.2 Static IP 
To configure the IP address (private or official) on your PC, someone (mostly a server system) must 
distribute and allot an IP address to the PC. An official IP address is allotted by your Internet service 
provider, and a private IP address is allotted by your Internet router. You can select whether to configure 
the IP address on the PC...

38
Using "Central Station"
2
2 Using "Central Station"
“LAN9512/LAN9514 USB 2.0 to Ethernet 10/100 Adapter #7”), select Properties   Internet 
Protocol Version 4 (TCP/IPv4)   Properties, and configure the static IP and DNS settings.
 
5After configuring the IP, click OK. The following message will appear.
 A static IP must be allotted to only one network device. The following mes sage will appear if the 
same static IP is allotted to the network device s of both the notebook PC and...

39
Using "Central Station"
2
2 Using "Central Station"
2.6 Notice before your use of Wireless USB or USB Mode
1Most of the games require high resolution and fast response time. When you play a game, we 
recommend to use Analog or HDMI  Mode rather than Wireless USB  or USB Mode. Also, for playing 
Game and Movie clips on Windows XP or VISTA is not supported.
2When  Wireless USB /USB Mode is used for first time or PC power saving mode is disconnected, it 
may take some time to acknowledge...

403 Connecting and Using a Source Device
3 
Connecting and Using a Source Device
3.1 Before Connecting
3.1.1 Pre-connection Checkpoints
zBefore connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
zDo not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
zCheck the types of ports at the back of the product you want to connect.