Samsung Syncmaster Bx2335 User Manual

Installing the Software4-2
3.In the [Add/Remove] window, find and select MagicTune™so that it is highlighted. 
4.Click [Change or Remove Programs] to remove the software. 
5.Select [Yes] to start removing MagicTune™. 
6.Wait until a message box appears informing you that the software has been removed completely. 
 For technical support, the FAQ (frequently asked questions) or information about the software upgrade for MagicTune™, 
please visit our website. 
 
 

4-3Installing the Software
4-3 MultiScreen
What is MultiScreen ?
MultiScreen enables users to use the monitor by partitioning multiple sections.
Installing the Software
1.Insert the installation CD into the CD-ROM drive. 
2.Select the MultiScreen setup program.
 If the pop-up screen for the software installation does not appear on the main screen, find and double-click the 
MultiScreen setup file on the CD-ROM.
 
3.When the Installation Wizard appears, click [Next].
4.Complete the remaining software...

Troubleshooting5-1
5 Troubleshooting
5-1 Monitor Self-Diagnosis
 • You can check if the product is working properly using the Self-Diagnosis function.
• If a blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected, perform 
the self-diagnosis function according to the procedures below.
 
1.Turn the product and the PC off.
2.Separate the signal cable from the product .
3.Turn the product on. 
4.If the product is working properly, the  message appears.
In...

5-2Troubleshooting
5-2 Before Requesting Service
 Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest 
Samsung Electronics Service Center.
 
A BLANK SCREEN APPEARS / I CANNOT TURN THE PRODUCT ON
Is the power cord connected properly? Check the connection status of the power cord.
Is the  message displayed on the 
screen?Check the cable connecting the PC and the product.
If the message appears on the screen even if the cable is 
properly...

Troubleshooting5-2
THE PICTURES ARE OUT-OF-FOCUS.
Did you change the resolution and the frequency appropriate 
to the product?Set the resolution and the frequency to the appropriate values 
in the graphics card
refer to the (Standard Signal Mode Table) 
THE COLOR IS DISPLAYED IN 16 BIT (16 COLORS). THE COLOR HAS BEEN CHANGED AFTER CHANGING THE 
GRAPHICS CARD.
Did you install the device driver for the product? Windows XP : Set the color again by selecting Control Panel 
→ Appearance and Themes → Display →...

5-3Troubleshooting
5-3 FAQ
FAQ!PLEASE TRY THE FOLLOWING!
How can I change the frequency (refresh rate) of the video 
signal?You have to change the frequency of the graphics card.
Windows XP : Change the frequency by selecting Control 
Panel → Appearance and Themes → Display → Settings → 
Advanced → Monitor, and then change the refresh rate under 
Monitor Settings. 
Windows ME/2000 : Change the frequency by selecting Con-
trol Panel  → Display  → Settings → Advanced → Monitor, 
and then change the refresh...

More Information6-1
6 More Information
6-1 Specifications
MODEL NAMEBX2035
LCD PanelSize 20 inches (49 cm)
Display area 476.64 mm (H) x 268.11 mm (V)
Pixel Pitch 0.2768 mm (H) x 0.2768 mm (V)
Synchroniza-
tionHorizontal 30 ~ 81 kHz
Vertical 56 ~ 75 Hz
Display Color 16.7 M
ResolutionOptimum resolution 1600 x 900 @ 60 Hz
Maximum resolution 1600 x 900 @ 60 Hz 
Input Signal, TerminatedDVI(Digital Visual Interface)- I
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)...

6-1More Information
Input Signal, TerminatedDVI(Digital Visual Interface)- I
0.7 Vp-p ± 5%
separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
Maximum Pixel Clock 164MHz (Analog,Digital)
Power Supply This product supports 100-240 V.Since the standard voltage may differ from 
country to country, please check the label on the back of the product.
Signal Cable DVI-A to D-Sub cable, Detachable
DVI-D to DVI-D cable, Detachable
Dimensions (WxHxD) / Weight (Simple 
stand)536.3 x 347.0 x...

More Information6-1
 Design and specifications are subject to change without prior notice.  Class B (Information Communication equipment for residential use)
This device is registered for EMC requirements for home use (Class B). It can be used in all areas. (Class B equipment 
emits less electromagnetic waves than Class A equipment.)
 
MODEL NAMEBX2335
LCD PanelSize 23 inches (58 cm)
Display area 509.76 mm (H) x 286.74 mm (V)
Pixel Pitch 0.2655 mm (H) x 0.2655 mm (V)
Synchroniza-
tionHorizontal 30 ~ 81...

6-2More Information
6-2 Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor 
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation 
when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it 
unattended for long periods. The PowerSaver system operates with a VESA DPM...