Samsung Syncmaster B2430hd User Manual

Using the Product3-3
3-3 Remote Control
 
• The performance of the remote control may be affected by a TV or other electronic device operating near the product, 
causing a malfunction due to interference with the frequency.
• This is a special remote control for the visually impair ed persons and has Braille points on the Power, Channel and 
Volume buttons.
 
POWER ( ) button
Turns the product On/Off.SOURCE( ) button
Press the button to change the 
input signal SOURCE.
Number Buttons
Press to change the...

3-3Using the Product
Installing Batteries in the Remote Control 
1.Lift the cover at the back of the remote  control upward as shown in the figure.
2. Install two AAA size batteries.
 Make sure to match the +and - ends of the ba tteries with the diagram inside the compartment. 
3.Close the cover.
 Remove the batteries and store them in  a cool, dry place if you won‘t be using the remote control for a long time.
If the remote control doesn‘t work, check the following :
• Is the TV power on?
• Are the plus...

Using the Product3-4
3-4 Using the Screen Adjustment Menu (OSD: On Screen Display)
The Screen Adjustment Menu (OSD: On Screen Display) Structure
Picture [PC / HDMI PC Timing]
 The default setting may be different depending on the selected  Input Mode (input signal source selected in External Input 
List) and the selected resolution.
 
TOP MENUSSUB MENUS
Picture
[PC / HDMI PC Timing] MagicBright MagicAngle Contrast Brightness Sharpness
Eco Solution Auto Adjustment Screen Picture Options Picture Reset...

3-4Using the Product
MENUDESCRIPTION
MagicBright  is a feature providing an optimum viewing envir onment depending on the contents of 
the image you are watching. Currently five different  modes are available: , , 
,  and . Each mode has its own pre-configured brightness 
value. 
•
 High Brightness
 For watching motion pictures such as a Blu-Ray or DVD.
•   For working with a mixture of images such as texts and graphics.
• 
 For documents or work  involving heavy text.
•   automatically detects the dist...

Using the Product3-4
Eco SolutionYou can choose various op tions of  features. 
•  You can reduce the power consumption  by adjusting the screen brightness.
•  -  -  -  -  - 
 • If you select , the screen  is turned off, but the sound remains on.
Press any button except volume button to turn on the screen.
• Not available in PC/HDMI PC timing.
 
•  Saves power by turning the TV off when no  signal is received from any source.
•  -  -  - 
 Disabled when the PC is on DPM(Display Power Management). 
Auto...

3-4Using the Product
Picture [ TV / AV / Component / HDMI ] 
MENUDESCRIPTION
Mode You can select the type of picture which  best corresponds to your viewing requirements.
You can activate either , , or .
•  Selects the picture for high-d efinition in a bright room.
•  Selects the picture for optimum display in a normal environment.
• Selects the picture for viewing movies in a dark room.
MagicAngle This feature allows you to see optimal screen quality according to your viewing position.
When viewing the...

Using the Product3-4
Backlight / Contrast / 
Brightness / Sharp-
ness / Color / Tint (G/
R)Your product has several settin
g options that allow you to control the picture quality. 
•  - Adjusts the  brightness of LCD back light.
•  - Adjusts the cont rast level of the picture.
•  - Adjusts the brightness level of the picture.
•  - Adjusts the edge definition of the picture.
•  - Adjusts color saturation of the picture.
•  - Adjusts the color tint of the picture.
 It is activated when the signal is NTSC....

3-4Using the Product
Picture Options • 
The tone of the color can be changed.
•  -  -  - 
 Settings can be adjusted and stored for each ex ternal device you have connected to an input 
of the TV.
 
• 
 You can switch the Size.
•  - Sets the picture to 16:9 wide mode. 
•  - Magnifies the size of the picture on the screen. 
•  - Magnifies the size of the picture more than . 
•  - Enlarges the aspect ratio of the picture to fit the entire screen. 
•  - Sets the picture to 4:3 normal mode. 
•  - Use the...

Using the Product3-4
Sound
• 
If the broadcast signal received by your TV is  weak, you can activate the  
feature to reduce any static and ghosting that may appear on the screen.
 • When the signal is weak, try other options until the best picture is displayed.
•  : When changing analog channels, displays signal strength.
- Only available for analog channels.
- When bar is green, you are receiving the best possible signal.
 
•  -  -  -  -  - 
•  Reduces MPEG noise to provide improved picture quality.
•...

3-4Using the Product
MENUDESCRIPTION
Mode• 
 Choose Standard for the st andard factory settings.
•   Choose Music when watching music videos or concerts.
•  Choose Movie when viewing movies.
•   Emphasizes voice over other sounds.
•  Increase the intensity of high-frequency sound to  allow a better listening experience for the 
hearing impaired.
 Press the [TOOLS] button to display the Tool s menu. You can also set the  by 
selecting   → .
Equalizer  You can adjust the left and right so und balance and...