Samsung Syncmaster B2340 User Manual

							Using the product3-40
3-40 Installing the Device Driver
 If you install the device driver, you can set up the appropriate resolution and frequency for the product. The device driver is 
included on the CD-ROM supplied with the product. If the supplied drive file is corrupted, please visit a service center or 
Samsung Electronics website(http://www.samsung.com/), and download the driver.
Related Windows 7 driver can be downloaded from Samsung Electronics website.
 
1.Insert the driver installation CD-ROM into the CD-ROM drive.
2.Click on Windows Driver.
3.Complete the remaining installation steps according to the instructions displayed on the screen.
4.Select the model of your product from the model list.
5.Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings. For more information, 
refer to the document about the Windows operating system.
 
						

							Using the product3-41
3-41 Product Operating Buttons
Product Operating Buttons
IconDescription
Press this button to view the On Screen Display (OSD).
This button is also used to exit the OSD or to return to a higher-level OSD menu
* OSD Adjustment Lock
This function locks the OSD in order to maintain the current settings or to prevent the 
settings from being changed by another person
On: If you press and hold the MENU button down for 5 seconds, the OSD Adjustment 
Lock function is activated.
Off: If you press and hold the MENU button down for 5 seconds again, the OSD 
Adjustment Lock function is disabled.
 Even if the OSD Adjustment Lock function is activated, users can adjust the 
brightness and contrast and can set up the adjustment function assigned to the 
[].
 
Users can set the  to one of the following functions. If the user 
presses the  [ ] after setting it, the configured function will be per-
formed
• PC signals :  -  -  - 
• AV signals :  -  -  - 
 You can set the function of the  by selecting 
 ->  in the OSD.
 
▲/▼Use these buttons to navigate the menu or to adjust a value in the OSD. 
Use this button to control the brightness of the screen. 
 
						

							Using the product3-41
Activates a highlighted menu item.
 In the  menu, you can also use this button to sequently switch 
between functions in the  menu as desired. 
 
SOURCEUse this button to select a function
If you press the [SOURCE] button when there is no OSD, the input signal (Analog/Dig-
ital/HDMI) is switched. When the input signal is switched by pressing [SOURCE] but-
ton or the product is turned on, a message displaying the selected input signal appears 
at the top left of the screen.
 • To select Digital mode, you have to connect the product and the PC with the 
DVI cable.
• This function is not available for products with an Analog interface only.
 
AUTOPress [AUTO] button to adjust the screen settings automatically
 This function is only available in Analog mode. 
If the resolution settings are changed in the Display Properties, the AUTO adjustment 
function is performed.
Press this button to turn the product on or off
Power LED
This LED is turned on when the product works normally. 
 For more information on the power-saving function, refer to the power saving 
function in More Information. When not using the product for a long time, 
unplugging the power cord is recommended to minimize power consumption.
 
When OSD is not on the screen, push the button to adjust volume.
IconDescription
 
						

							Using the product3-42
3-42 Using the Screen Adjustment Menu (OSD: On Screen Display)
The Screen Adjustment Menu (OSD: On Screen Display) Structure
 Monitor functions may vary according to models. Please refer to actual product. 
 PICTURE
Top MenusSub Menus
 PICTUREBrightness Contrast Sharpness MagicBright Picture Mode
MagicAngle Coarse Fine HDMI Black Level
 COLORMagicColor Red Green Blue Color Tone
Color Effect Gamma      
 SIZE & POSI-
TIONH-Position V-Position Image Size Menu H-Position Menu V-Position
 
SETUP&RESETReset Language MagicReturn MagicEco Off Timer On/Off
Off Timer Setting Key Repeat TimeCustomized Key Auto Source PC/AV Mode
Display Time Menu Transpar-
ency
 INFORMA-
TION
 
MenuDescription
BrightnessControls the screen brightness. • This menu is unavailable when  is set to  mode.
• This menu is unavailable when  is set.
 
ContrastControls the contrast of the pictures displayed on the screen
 • This menu is unavailable when  is set to  or  
mode.
• This menu is unavailable when  is set to  mode or  mode.
• This menu is unavailable when  is set.
 
 
						

							Using the product3-42
SharpnessControls the clarity of details of pictures displayed on the screen
 • This menu is unavailable when  is set to  or  
mode.
• This menu is unavailable when  is set to  mode or  mode.
• This menu is unavailable when  is set.
 
MagicBrightProvides preset picture settings optimized for various user environments such as editing a document, 
surfing the Internet, playing games,or movies and so on.
• 
If the preset picture modes are not sufficient, users can configure the  and  
directly using this mode.
• 
 This mode provides the picture setting appropriate for editing a document and surfing the Internet 
(text + picture).
•
This mode provides the picture setting appropriate for playing games that include lots of graphics and 
that require a fast screen refresh rate.
• 
This mode provides brightness and sharpness settings similar to those of a TV for the best 
entertainment environment (movie, DVD, etc.).
• 
Controls the picture contrast automatically so that bright and dark pictures are balanced overall.
 This menu is unavailable when  or  is set. 
Picture ModeThe Monitor has four automatic picture settings (, ,  and ) 
that are preset at the factory. You can activate either Dynamic, Standard, Movie or Custom. You can 
select Custom which automatically recalls your personalized picture settings.
• 
Select this mode to view a sharper image than in Standard mode.
• 
Select this mode when the surroundings are bright. This also provides a sharp image.
•
Select this mode when the surroundings are dark. This will save power and reduce eye fatigue.
• 
Select this mode when you want to adjust the image according to your preferences
 • This can only be set when the external input is connected through HDMI/DVI and  is set to .
• This menu is unavailable when  or  is set.
 
MenuDescription
 
						

							Using the product3-42
MagicAngleThis feature allows you to see optimal screen quality according to your viewing position.
When viewing the screen at an angle from below, above or the side of the monitor, by setting the 
appropriate mode for each position you can obtain a similar picture quality as viewing the screen 
directly from the front.
 Set to  when viewing directly in front of the screen. 
•    - Select when viewing from the front position.
•    - Select when viewing from a slightly lower position.
•    - Select when viewing from the lower position.
•    -Select when viewing from the upper position.
•     - Select when viewing from the left or right position.
•   -When  is selected, settings for  is applied by default. 
Users can set suitable picture quality as needed.
 • This menu is unavailable when  is set to  or  
mode.
• This menu is unavailable when  or  is set.
 
CoarseRemoves vertical noise lines (line pattern) from the screen.
The location of the screen may be changed after the adjustment. In this case, move the screen so 
that the screen is displayed at the center of the display panel using the  menu.
 This function is only available in Analog mode. 
FineRemoves horizontal noise lines (line pattern) from the screen.
If you cannot remove the noise completely with the  function, adjust the  and then 
use the  function again.
 This function is only available in Analog mode. 
HDMI Black LevelWhen watching with a DVD or set-top box connecting to the product via HDMI, image quality deterio-
ration (black level, lower-quality contrast, lighter color tone, etc.) may occur depending on the con-
nected external device.
• 
• 
 This function is active only when the external device is connected via . The  function may not be compatible with all external devices.
 
MenuDescription
 
						

							Using the product3-42
 COLOR
 
						

							Using the product3-42
 (This is unavailable when  is set to  and  mode.) 
MenuDescription
MagicColorExpresses natural colors more clearly without changing the picture quality using proprietary digital 
picture quality improvement technology developed by Samsung Electronics.
•  - Turns the  function off.
•  - You can compare the pictures processed by  with the original pictures.
•  - Provides a clearer picture including areas corresponding to skin color.
•  - Improves the chroma of pictures except for areas corresponding to skin color.
 • This menu is unavailable when  is set.
• This menu is unavailable when  is set.
 
RedYou can adjust the red color value of pictures according to your preference. • This menu is unavailable when  is set to  mode or  mode.
• This menu is unavailable when  is set.
 
GreenYou can adjust the green color value of pictures according to your preference. • This menu is unavailable when  is set to  mode or  mode.
• This menu is unavailable when  is set.
 
BlueYou can adjust the blue color value of pictures according to your preference. • This menu is unavailable when  is set to  mode or  mode.
• This menu is unavailable when  is set.
 
Color ToneYou can set the color temperature according to your preference.
•  - Sets the color temperature of the screen to a cooler color.
•  - Sets the color temperature of the screen to the standard color temperature.
•  - Sets the color temperature of the screen to a warmer color.
•  - Select this menu to set the color temperature manually.
If you do not like the preset color temperatures, you can manually adjust the value of RGB.
 • This menu is unavailable when  is set to  mode or  mode.
• This menu is unavailable when  is set.
• This menu is unavailable when  is set.
 
Color EffectYou can change the overall atmosphere by changing the color of pictures.
•  - Turns the  function off.
•  -Displays pictures in black and white. 
•  - Displays pictures in green mono color. 
•  - Displays pictures in aqua mono color. 
•  - Displays pictures in sepia mono color. 
 • This menu is unavailable when  is set.
• This menu is unavailable when  is set.
 
GammaUsing this menu, you can change the intensity of the colors of medium brightness.
•  -  -  This menu is unavailable when  is set. 
 
						

							Using the product3-42
 SIZE & POSITION
MenuDescription
H-PositionMoves the position of the display area on the screen horizontally.
 • This function is only available in Analog mode.
• When a 720P, 1080i or 1080P signal is input in AV mode ,select to adjust 
horizontal position in 0-6 levels.
 
V-PositionMoves the position of the display area on the screen vertically.
 • This function is only available in Analog mode.
• When a 720P, 1080i or 1080P signal is input in AV mode ,select to adjust 
vertical position in 0-6 levels. 
 
Image Size
 Supplied for the wide models only such as 16:9 or 16:10. 
PC signals 
•  - The picture is displayed at the aspect ratio of the input signal.
•  - The picture is displayed in full screen regardless of the aspect ratio of the input signal.
 • A signal not in the standard mode table is not supported.
• If the resolution is set to the optimal resolution, the aspect ratio does not change whether the 
 is set to  or .
 
AV signals 
•  - Displays pictures at the 4 : 3 aspect ratio. 
•  - Displays pictures at the 16 : 9 aspect ratio. 
•  - If a 720P, 1080i or 1080P signal is input in HDMI/DVI input mode, the picture is 
displayed as is without truncation.
 This can only be set when the external input is connected through HDMI/DVI and  is set to .
 
•  - Displays pictures at the 4 : 3 aspect ratio. 
•  - Displays pictures at the 16:10 aspect ratio. 
•  - If a 720P, 1080i or 1080P signal is input in HDMI/DVI input mode, the picture is 
displayed as is without truncation.
 • It can only be selected if an external input is connected to the HDMI/ DVI terminal and the 
 is set to .
• When the panel is of 16:10,the screen size options include ,,.
 
Menu H-Position You can adjust the horizontal position of the OSD.
Menu V-Position You can adjust the vertical position of the OSD.
 
						

							Using the product3-42
 SETUP&RESET
MenuDescription
ResetUse this function to restore the visual quality and color settings to the factory defaults.
•  - 
LanguageSelect a language for the OSD.
 The selected language is only applied to the product OSD. This setting does not affect the other 
functions of the PC.
 
MagicReturnOnly works in Windows 7 and recommended when using multiple monitors.
• 
Whenis selected, thefunction is turned off.
•
Whenis selected, thefunction is turned on.
 • The function is available in Windows 7 only.When use the other OS,it is recommended to 
set this function to .
• This function is not available for analog signal input.
• This function is not available when  is set to .
• This function may be unavailable for some graphics cards. These graphics cards dont 
support the international EDID standard.(DDWG DVI Standard) It is recommended to set 
this function to .
• Press and hold down the ▼ key for 5 seconds while the  OSD is 
displayed, will be automatically set to .
 
MagicEcoThis function provides user a low power mode which is realized by lowering the current of the display 
panel.
• 
When  is selected, the power consumption is 100% of default setting.
• 
When  is selected, the power consumption is about 75% of default setting.
• 
When  is selected, the power consumption is about 50% of default setting.
• 
When  is selected, the function is turned Off .
 This menu is unavailable when  is set to  mode. 
Off Timer On/OffYou can turn the Off Timer on or off.
•  -