Samsung Syncmaster B2230w User Manual

Installing the Software4-3
4-3 MultiScreen
What is MultiScreen ?
MultiScreen enables users to use the monitor by partitioning multiple sections.
Installing the Software
1.Insert the installation CD into the CD-ROM drive. 
2.Select the MultiScreen setup program.
 If the pop-up screen for the software installation does not appear on the main screen, find and double-click the 
MultiScreen setup file on the CD-ROM.
 
3.When the Installation Wizard appears, click [Next].
4.Complete the remaining software...

5-1Troubleshooting
5 Troubleshooting
5-1 Monitor Self-Diagnosis
 • You can check if the product is working properly using the Self-Diagnosis function.
• If a blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected, perform 
the self-diagnosis function according to the procedures below.
 
1.Turn the product and the PC off.
2.Separate the signal cable from the product .
3.Turn the product on. 
4.If the product is working properly, the  message appears.
In...

Troubleshooting5-2
5-2 Before Requesting Service
 Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest 
Samsung Electronics Service Center.
 
A BLANK SCREEN APPEARS / I CANNOT TURN THE PRODUCT ON
Is the power cord connected properly? Check the connection status of the power cord.
Is the  message displayed on the 
screen?(Connected using the D-sub cable)
Check the cable connecting the PC and the product.
(Connected using the DVI cable)
If...

5-2Troubleshooting
THE COLOR IS DISPLAYED IN 16 BIT (16 COLORS). THE COLOR HAS BEEN CHANGED AFTER CHANGING THE 
GRAPHICS CARD.
Did you install the device driver for the product? Windows ME/XP/2000 : Set the color again by selecting Con-
trol Panel → Display → Settings.
Windows Vista  : Set the color again by selecting Control 
Panel → Personalization→ Display Settings.
Windows 7  : Set the color again by selecting Control Panel → 
Display→ Change display settings→ Advanced set-
tings→Monitor.
For more...

Troubleshooting5-3
5-3 FAQ
FAQ!PLEASE TRY THE FOLLOWING!
How can I change the frequency of the video signal? You have to change the frequency of the graphics card.
(For more information, refer to the User Manual of the com-
puter or the graphics card.)
How can I change the resolution? Windows XP : Change the resolution by selecting Control 
Panel → Appearance and Themes → Display → Settings.
Windows ME/2000 : Change the resolution by selecting Con-
trol Panel  → Display  → Settings.
Windows Vista : Set...

6-1More Information
6 More Information
6-1 Specifications
 Class B (Information Communication equipment for residential use)
This device has been registered regarding EMI for home use (Class B). It may be used in all areas. (Class B equipment 
emits less electromagnetic waves than Class A equipment.)
 
MODEL NAMEB1630N
LCD PanelSize 15.6 inches (39 cm)
Display area 344.23 mm (H) x 193.54 mm (V) 
Pixel Pitch 0.252 mm (H) x 0.252 mm (V)
Synchroniza-
tionHorizontal 30 ~ 61 kHz
Vertical 56 ~ 75 Hz
Display...

More Information6-2
6-2 Power Saving Function
This product provides a power saving function that automatically turns the screen off when the product is not used for a 
predetermined period of time to reduce power consumption. If the product enters power saving mode, the power LED turns to a 
different color to indicate that the product is in power saving mode. When the product is in power saving mode, the power is not 
turned off and you can turn the screen on again by pressing any key or clicking the...

6-3More Information
6-3 Specifications
 Class B (Information Communication equipment for residential use)
This device has been registered regarding EMI for home use (Class B). It may be used in all areas. (Class B equipment 
emits less electromagnetic waves than Class A equipment.)
 
MODEL NAMEB1730NW
LCD PanelSize 17 inches (43 cm)
Display area 367.2 mm (H) x 229.5 mm (V) 
Pixel Pitch 0.255 mm (H) x 0.255 mm (V)
Synchroniza-
tionHorizontal 30 ~ 81 kHz
Vertical 56 ~ 75 Hz
Display Color 16.2 M...

More Information6-4
6-4 Power Saving Function
This product provides a power saving function that automatically turns the screen off when the product is not used for a 
predetermined period of time to reduce power consumption. If the product enters power saving mode, the power LED turns to a 
different color to indicate that the product is in power saving mode. When the product is in power saving mode, the power is not 
turned off and you can turn the screen on again by pressing any key or clicking the...

6-5More Information
6-5 Specifications
 Class B (Information Communication equipment for residential use)
This device has been registered regarding EMI for home use (Class B). It may be used in all areas. (Class B equipment 
emits less electromagnetic waves than Class A equipment.)
 
MODEL NAMEB1930N
LCD PanelSize 18.5 inches (47 cm)
Display area 409.8 mm (H) x 230.4 mm (V) 
Pixel Pitch 0.3 mm (H) x 0.3 mm (V)
Synchroniza-
tionHorizontal 31 ~ 80 kHz
Vertical 56 ~ 75 Hz
Display Color 16.7 M...