Samsung Syncmaster B2230hd User Manual

							Using the Product3-5
Settings
Using the Settings Menu
MENUDESCRIPTION
Continuous Movie 
Play HelpSelect to display the help pop-up message for continuous movie playback.
•  - 
Get the DivX® VOD 
registration codeShows the registration code authorized for the TV. If
 you connect to the DivX web site and register 
the registration code with a personal account, you  can download VOD registration file. If you play 
the VOD registration using , the registration is completed.
 For more information on DivX® VOD, visit www.DivX.com. 
Get the DivX® VOD 
deactivation code When DivX® VOD is not registered, the registrati
on deactivation code is displayed. If you execute 
this function when DivX® VOD is registered, th e current DivX® VOD registration is deactivated.
InformationSelect to view information about the connected device.
 
						

							3-6Using the Product
3-6 Anynet+ (HDMI-CEC)
What is Anynet+?
 is a function that enables you to control all connected Samsung devices that 
support  with your Samsung TV‘s remo te. The  system can be used only 
with Samsung devices that hav e the  feature. To be sure your Samsung device 
has this feature, check if ther e is an  logo on it.
Connecting Anynet+ Devices
1. Connect the [HDMI (DVI) IN (1 or 2) ] jack on the TV and the HDMI OUT jack of the corresponding  device using 
an HDMI cable.
2. Connect the [ HDMI (DVI) IN (1 or 2) ] jack of the home theater and the HDMI OU T jack of the corresponding  
device using an HDMI cable. 
 • Connect the Optical cable between the [DIGITAL AUDIO OUT (OPTICAL)] jack on your TV and the Digital Audio  Input on the Home Theater. 
• When following the connection above, the Optical jack only  outputs 2 channel audio. You will only hear sound from 
the Home Theater‘s Front Left and Right speakers and th e subwoofer. If you want to hear 5.1 channel audio, 
connect the [DIGITAL AUDIO OUT (OPTICAL)]  jack on the DVD / Satellite Box (i.e. Anynet Device 1 or 2) directly to 
the Amplifier or Home Theater, not the TV.
• Connect only one Home Theater.
• You can connect an  device using the HDMI  cable. Some HDMI cables may not support  
functions.
•  works when the AV device supporting   is in the Standby or On status.
•  supports up to 10 AV devices  in total. Note that you can connect up to 3 devices of the same type.
 
 
						

							Using the Product3-6
 Menu
The  menu changes depending on the type and status of the Anynet+ devices connected to the TV.
If more than one recording device is connected, they are disp layed as (*recorder) and if only one recording device is 
connected, it will be represented as (*device_name).
Setting Up Anynet+
 Press the [TOOLS] button to display the Tools menu. You  can also display the  menu by selecting   → 
.
 MENUDESCRIPTION
View TV Changes  mode to TV broadcast mode.
Device List Shows the Anynet+ device list.
Recording: (*recorder) S tarts recording immediately using the recorder. 
(This is only available for devices  that support the recording function.)
(device_name) MENU Shows the connected  device menus. E.g. If a DVD recorder is connected, the disc menu of 
the DVD recorder will appear.
(device_name) INFO Shows the play menu  of the connected device. E.g. 
If a DVD recorder is connected, the pl ay menu of the DVD recorder will appear.
Stop Recording: (*reco rder) Stops recording.
Receiver Sound is played through the receiver.
 
						

							3-6Using the Product
MENUDESCRIPTION
Device List
1. Press the [TOOLS] button. Press the [ ]  button to select .
2. Press the   or   button to select  , then press the [ ] button.
 -  devices connected to the TV are listed.
 - If you cannot find a device you want, press the red button to scan for devices.
3. Press the   or   button to select a particular  device and press the [ ] button. It is switched to the 
selected device. 
 -  must be set to  in the  menu for the  
menu to appear.
 Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation 
during the switching operation. 
The time required to scan for devices is dete rmined by the number of connected devices. 
When the device scan is complete, the numbe r of devices found are not displayed. 
Although the TV automatically searches the device list when the TV is turned on via the power 
button, devices connected to the TV may not a lways be automatically displayed in the device 
list. Press the red button to search for the connected device. 
If you have selected external input mode by pre ssing the [SOURCE] button, you cannot use the 
 function. Make  sure to switch to an  device by using the . 
 
Setup• 
To use the  Function,  must be set to . 
 When the function is di sabled, all the  related operations 
are deactivated. 
 
• 
Setting an  Device to turn Off  automatically when the TV is turned off.
 The active source on the TV remote must be  set to TV to use the  function. 
If you set  to , connecte d external devices are also turned off when the 
TV is turned off. If an external device is  still recording, it may or may not turn off. 
 
 
						

							Using the Product3-7
3-7 Installing the Device Driver
 If you install the device driver, you can set up the appropriate resolution and frequency for the product. The device driver is 
included on the CD supplied with the product. If the supplied drive file is corrupted, please visit the Samsung Electronics 
website (www.samsung.com),  and download the driver.
 
1.Insert the driver installation CD into the CD-ROM drive.
2. Click on Windows Driver.
3. Complete the remaining installation steps according to the instructions displayed on the screen.
4. Select the model of your pr oduct from the model list.
5. Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings. For more information, 
refer to the document about the Windows operating system.
 
						

							3-8Using the Product
3-8 Standard Signal Mode Table
 An LCD monitor has one optimal resolution for the best visual quality depending on the screen size due to the inherent 
characteristics of the panel, unlike a CDT monitor.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setti ng 
the resolution to the optimal resolution of the product.
 
PC Timing (PC and HDMI input)
If the signal from the PC is one of the following standard signal  modes, the screen is set automatically. However, if the signal from 
the PC is not one of the following signal modes, a blank scree n may be displayed or only the Power LED may be turned on. 
Therefore, configure it as follows referring to the User Manual of the graphics card.
Horizontal Frequency
The time taken to scan one line from the left-most position to t he right-most position on the screen is called the horizontal cycle 
and the reciprocal of the hori zontal cycle is called the horizon tal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on  the screen tens of times every second so that humans can see the picture. This 
frequency is called the vertical frequency. The vertical frequency is represented in Hz.
RESOLUTION
HORIZONTAL 
FREQUENCY  (KHZ)VERTICAL 
FREQUENCY   (HZ)CLOCK 
FREQUENCY
(MHZ)
POLARITY (H/V)
IBM, 640 x 350 31.469 70.086 25.175 +/-
IBM, 640 x 480 31.46959.940 25.175 -/-
IBM, 720 x 400 31.469 70.087 28.322 -/+
MAC, 640 x 480 35.00066.667 30.240 -/-
MAC, 832 x 624 49.72674.551 57.284 -/-
MAC, 1152 x 870 68.68175.062100.000 -/-
VESA, 640 x 480 37.861 72.809 31.500 -/-
VESA, 640 x 480 37.500 75.000 31.500 -/-
VESA, 800 x 600 35.156 56.250 36.000 +/+
VESA, 800 x 600 37.879 60.317 40.000 +/+
VESA, 800 x 600 48.077 72.188 50.000 +/+
VESA, 800 x 600 46.875 75.000 49.500 +/+
VESA, 1024 x 768 48.36360.004 65.000 -/-
VESA, 1024 x 768 56.47670.069 75.000 -/-
VESA, 1024 x 768 60.02375.029 78.750 +/+
VESA, 1152 x 864 67.50075.000108.000 +/+
VESA, 1280 X 800 49.702 59.810 83.500 -/+
VESA, 1280 X 960 60.00060.000108.000 +/+
VESA, 1280 X 1024 63.981 60.020 108.000 +/+
VESA, 1280 X 1024 79.976 75.025 135.000 +/+
VESA, 1440 x 900 55.93559.887106.500 -/+
VESA, 1680 x 1050 65.29059.954146.250 -/+
VESA, 1920 x 1080 67.50060.000148.500 +/+
 
						

							Installing the Software4-1
4 Installing the Software
4-1 Natural Color
What is Natural Color ?
This software is for Samsung products only and enables you to adjust the displayed colors on the product so they more closely 
match the colors of printed pictures. For more inform ation, refer to the online help of the software (F1).
Natural Color is provided online. You can download it from the website below and install;
http://www.samsung.com/us/consumer/learningresou rces/monitor/naturalcolorexpert/pop_download.html
 
						

							4-2Installing the Software
4-2 MultiScreen
What is MultiScreen ?
MultiScreen enables you to partition multiple sections on the Monitor.
Installing the Software
1.Insert the installation CD  into the CD-ROM drive. 
2. Select the MultiScreen setup program.
 If the pop-up screen for the software installation does no t appear on the main screen, find and double-click the 
MultiScreen setup file  on the CD-ROM.
 
3.When the Installation Wizard appears, click [Next].
4. Complete the remaining software installation steps a ccording to the instructions displayed on the screen.
 • The software may not work properly if you do not restart the computer after the installation.
• The MultiScreen icon may not appear depending on t he computer system and the product specifications.
• If the shortcut icon does not appear, press the F5 key.
 
MultiScreen Installation Requirements
The MultiScreen installation may be affected by the gra phics card, motherboard and the networking environment. 
Operating System
OS
• Windows 2000
• Windows XP Home Edition
• Windows XP Professional
• Windows Vista 32Bit
• Windows 7 32Bit
 For MultiScreen, Windows 2000 or later operating systems are recommended.  
Hardware
•
 At least 32MB of memory
• At least 60MB of free space on the hard disk drive 
Removing the Software 
Click [Start], select [Settings]/[Control Panel], and then double-cli ck [Add or Remove Programs]. 
Select MultiScreen from the program li st and click the [Add/Delete] button. 
 
						

							Troubleshooting5-1
5 Troubleshooting
5-1 Monitor Self-Diagnosis
 • You can check if the product is working properly using the Self-Diagnosis function.
• If a blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected, perform  the self-diagnosis function according to the procedures below.
 
1.Turn the product and the PC off.
2. Remove the D-Sub cable from the product. 
3. Turn the product on. 
4. If the product is working properly, the   message appears.
In this case, if a blank screen is displayed again, make  sure that there is no problem with the PC and the connection.
 
						

							5-2Troubleshooting
5-2 Before Requesting Service
 Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest 
Samsung Electronics Service Center.
 
PROBLEMS RELATED TO INSTALLATION (PC MODE)
The monitor screen flickers. Check if the signal cable between the computer and the monitor is securely 
connected and tightened.
(Refer to Connecting to a Computer) 
PROBLEMS RELATED TO SCREEN
Screen is blank and power indicator is off. Ensure that t he power cord is firmly connected and the LCD monitor is on.
(Refer to Connecting to a Computer) 
 message Ensure that the signal cable is firmly connected to the PC or video sources.
(Refer to Connecting to a Computer) 
 message Check the maximum resolution and the frequency of the video adapter.
Compare these values with the data in  the Standard Signal Mode Table. 
Picture rolls vertically. Check if the signal cable is securely connected.Connect it again securely. 
(Refer to Connecting to a Computer) 
Image is not clear. Picture is blurred. Run Frequency  and < Fine> tuning.
Turn on again after removing all accessories(video extension cable, etc.)
Set resolution and frequency to the recommended ranges.
Picture image is unstable and vibrates. Check if the resolution and frequency set for the computer video card falls 
in the range supported by the monitor.  If not, reset them referring to the 
current  under the monitor menu and Standard Signal Mode 
Table.
Ghost images are shown in the picture.
The image is too light or too dark Adjust the  and .
(Refer to the , ) 
Screen is blank and the power indicator light 
blinks every 0.5 or 1 seconds The monitor is using its power management system.
Press a key on the keyboard.
The screen is blank and is blinking.
If you see the  message on the screen when you press the 
[MENU] button, check the cable conne ction between the monitor and the 
computer to ensure that the connector is properly connected.
PROBLEMS RELATED TO AUDIO
No sound Ensure that the audio cable is firmly connected to both the audio-in port on 
your monitor and the audio-out port on your sound card.
(Refer to Connecting to a Computer) 
Check the volume level.
The sound level is too low. Check the volume level.
If the volume is still too low after turning the control to its maximum, check 
the volume control on the computer  sound card or software program.
PROBLEMS RELATED TO REMOTE CONTROL 
The remote control buttons do not res pond. Check the battery polarities (+/-).
Check if the batteries have been exhausted.
Check if the power is on.
Check if the power cord is securely connected.
Check if a special fluorescent or neon lamp is on in the vicinity.