Samsung Syncmaster B2230hd User Manual

Major Safety Precautions1-3
Maintaining the Correct Posture when Using this Product
Keep the small accessories in a location out 
of the reach of children.Take care when adjusting the angle of the 
product or the height of the stand.
• If your hand or finger is caught, you may 
be injured.
• If the product is tilted excessively, the  product may fall and this may result in 
injury.
Avoid placing a heavy object over the prod-
uct.
• Otherwise, it may result in a problem  with the product or injury.When...

2-1Installing the Product
2 Installing the Product
2-1 Package Contents
 • Unpack the product and check if all of the following contents have been included.
• Store the packaging box in case you need to move the product at a later stage.
 
 The cleaning cloth is supplied with black high-glossy models only.
 
CONTENTS
Quick Setup GuideProduct Warranty
(Not available in all locations) User Manual Power Cord
Cable Holder
Batteries (AAA X 2) 
(Not available in all locations) Stand Base
Stand Connector...

Installing the Product2-2
2-2 Installing the Stand
 Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. 
Insert the Stand Connector into the Stand Base in the direction shown by the figure.
Check if the Stand Connector is firmly connected.
Turn the connecting screw at the bottom of the Stand base fully so that it is completely 
fixed.
Place a soft cloth over the table to prot ect the product and place the product onto the 
cloth face...

2-2Installing the Product
Hold the main body of the product with your hand as shown by the figure.
Push the assembled stand into the main body in the direction of the arrow as shown in 
the figure.
- Caution
Do not lift the product holding only the stand.
 

Installing the Product2-3
2-3 Removing the Stand
 Before removing the stand, place the product down on a flat and stable surface so that the screen faces downwards. 
Place a soft cloth over the table to protect the product and place the product face down.
Hold the main body of the product with your hand as shown by the figure. 
Pull the stand in the direction of the arro w as shown in the figure to separate it.
Turn the connecting screw at the bottom of th e Stand base to separate it from the Stand...

2-4Installing the Product
2-4 Attaching a Wall Mount/Desktop Stand
Attaching a Wall Mount/Desktop Stand(not supplied)
This product complies with 75 mm x 75 mm (2.95 x 2.95 inches) VESA specifications.
1.Turn the product off and unplug the power cord from the wall outlet.
2. Place a soft cloth or cushion on a flat surface to  protect the panel and place the product face down.
3. Align wall mount/desktop stand to the Moni tor/TV and firmly fix the wall mount/desktop stand by fastening the screw.
4. Align...

Installing the Product2-5
2-5 Connecting to a Computer
1. Connect the product to a PC depending on the video output supported by the PC.
 The connecting part may differ depending on the product model. 
When the graphics card provides a D-Sub (analog) output
•
Connect the [PC IN] port of the product to the D-Sub port of the PC with the D-Sub cable. 
When the graphics card provides a DVI (digital) output
• Connect the [HDMI (DVI) IN] port of the product to the DVI port of the PC with the HDMI to DVI...

2-5Installing the Product
2. Connect the [HDMI/PC/DVI-D AUDIO IN] port on the rear side of the monitor to the sound card of the PC.
3. To use the monitor, connect the power cable to a power outlet and the [POWER] port on the monitor.
(The input voltage is switched automatically.)
 

Installing the Product2-5
 • You may enjoy clear and quality sound from the computer sound card using the monitors speakers. (You dont need to 
install separate speakers for your computer.)
• You may get a blank screen depending on the type of video  card you are using if you connect the D-sub cables 
simultaneously to one computer.
 
 

2-6Installing the Product
2-6 Using it as a TV
You may view television programs on the monitor if it is connected to an antenna or cable system without installing any 
separate TV reception hardware or  software on your computer.
1. Connect the cable or TV antenna cable to t he [ANT IN] port on the rear side of the monitor. 
• When using an indoor antenna/cable terminal:
Check the antenna terminal on the wall and then connect the antenna/cable TV cable.
• When using an outdoor antenna:
When using an...