Samsung Syncmaster B2030hd User Manual

1-3Major Safety Precautions
 Caution
Avoid moving the product by pulling the 
power cord or antenna cable.
• Otherwise, it may result in electric 
shock, fire or a pr oblem with the product 
due to damage to the cable.When a gas leak occurs, do not touch the 
product or the power plug and ventilate 
immediately.
• A spark may result in an explosion or  fire.
• During a thunder or lighting storm, do  not touch the power cord or antenna 
cable.
Avoid lifting up or moving the product by 
holding only the...

Major Safety Precautions1-3
Maintaining the Correct Posture when Using this Product
Keep the small accessories in a location out 
of the reach of children.Take care when adjusting the angle of the 
product or the height of the stand.
• If your hand or finger is caught, you may 
be injured.
• If the product is tilted excessively, the  product may fall and this may result in 
injury.
Avoid placing a heavy object over the prod-
uct.
• Otherwise, it may result in a problem with the product or injury.When...

2-1Installing the Product
2 Installing the Product
2-1 Package Contents
 • Unpack the product and check if all of the following contents have been included.
• Store the packaging box in case you need to move the Product later. 
• If any items are missing, contact your dealer.
• Contact a local dealer to purchase optional items.
 
 • The colour and the appearance may differ depending on the product, and the specifications are subject to change 
without prior notice to improve the performance.
• The...

Installing the Product2-2
2-2 Installing the Stand
 Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. 
Insert the Stand Connector into the Stand Base in the direction shown by the figure. 
Check if the Stand Connector is firmly connected.
Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.
Place a soft cloth over the table to protec t the product and place the product onto the 
cloth face down.
 

2-2Installing the Product
 The colour and the appearance may differ depending on the product, and the specifications are subject to change without 
prior notice to improve the performance.
 
Hold the main body of the product wi th your hand as shown by the figure.
Push the assembled stand into the main body in the direction of the arrow as shown in 
the figure.
- Caution
Do not lift the product holding only the stand
 

Installing the Product2-3
2-3 Removing the Stand
 Before removing the stand, place the product down on a flat and stable surface so that the screen faces downwards. 
 The colour and the appearance may differ depending on the pr oduct, and the specifications are subject to change without 
prior notice to improve the performance.
 
Place a soft cloth over the table to protect the product and place the product face down.
Hold the main body of the product with your hand as shown by the figure. 
Pull the...

2-4Installing the Product
2-4 Attaching a Wall Mount/Desktop Stand
Attaching a Wall Mount/Desktop Stand(not supplied)
This product provides a stand mount of 75 mm x 75 mm (2 .95 x 2.95 inches) that complies with the VESA specifications.
 : Wall/Desktop Stand Mount
 : Wall mount kit/desktop stand (not supplied)
1. Turn the product off and unplug the power cord from the wall outlet.
2. Place a soft cloth or cushion on a flat surface to  protect the panel and place the product face down.
3. Remove the screw...

Installing the Product2-5
2-5 Connecting to a Computer
1. Connect the product to a PC depending on the video output supported by the PC.
 The connecting part may differ depending on the product model. 
When the graphics card provides a D-Sub  output
• Connect the [PC IN] port of the product to the D-Sub port of the PC with the D-Sub cable. 
When the graphics card provides a DVI  output
• Connect the [HDMI(DVI) IN] port of the product to  the DVI port of the PC with the HDMI to DVI cable.
When the...

2-5Installing the Product
• Connect the [HDMI(DVI) IN] port of the product to the HDMI port of the PC with the HDMI cable.
2. Connect the [HDMI/PC/DVI-D AUDIO IN] port on the re ar side of the monitor to the sound card of the PC.
3. To use the monitor, connect the power cable to a power outlet and the [POWER] port on the monitor.
(The input voltage is switched automatically.)
 

Installing the Product2-5
 • You may enjoy clear and quality sound from the computer sound card using the monitors speakers. (You dont need to 
install separate speakers for your computer.)
• You may get a blank screen depending on the type of video  card you are using if you connect the D-sub cables 
simultaneously to one computer.