Samsung Syncmaster B1940mr User Manual

							Major Safety Precautions1-3
 Caution
Usage Related
 Warning
Before cleaning the product, unplug the 
power cord.
• Otherwise, it may result in electric shock 
or fire.When cleaning the product, do not spray 
water directly over the product parts. 
• Make sure that water does not enter the 
product. 
• Otherwise, it may result in fire, electric 
shock or a problem with the product. 
Avoid spraying cleansing agent directly onto 
the product.
• This may result in discoloration or 
cracking of the exterior of the product or 
the panel coming off.When cleaning the product, disconnect the 
power cord and clean the product with a soft 
dry cloth.
• Avoid using chemicals such as wax, 
benzene, alcohol, thinner, mosquito-
repellent, fragrance, lubrication or 
cleansing agent when cleaning the 
product.
This may result in the exterior being 
deformed or the print being removed.
Use a soft, damp cloth with a monitor-
exclusive cleansing agent and wipe the 
product with it.
• If no monitor-exclusive cleansing agent 
is available, dilute a cleansing agent 
with water at a ratio of 1:10 before 
cleaning the product.Since the exterior of the product is easily 
scratched, be sure to use a proper cleans-
ing cloth. Use the cleansing cloth with a 
small amount of water. However, if the cloth 
is contaminated by alien substances, it may 
result in scratches to the exterior; therefore 
shake off any alien substances from the 
cloth before using it.
Since a high voltage runs through the prod-
uct, never disassemble, repair or modify the 
product yourself.
• Otherwise, it may result in fire or electric 
shock.
•  If the product needs to be fixed, contact 
a service center.When cleaning the product, do not spray 
water directly over the product parts. 
• Make sure that water does not enter the 
product. 
• Otherwise, it may result in fire, electric 
shock or a problem with the product. 
If the product generates a strange noise, a 
burning smell, or smoke, unplug the power 
plug immediately and contact a service cen-
ter.
• Otherwise, it may result in electric shock 
or fire. Avoid letting children to hang or climb onto 
the product.
• Otherwise, it may result in the product 
falling and this may result in injury or 
death.
If you drop the product or the case is dam-
aged, turn the power off and unplug the 
power cord. Contact a service center.
• Otherwise, it may result in fire or electric 
shock.Avoid placing objects such as toys and 
cookies on top of the product.
• If a child hangs over the product to grab 
an object, the object or the product may 
fall and this may result in injury or even 
death.
 
						

							1-3Major Safety Precautions
 Caution
When thunder or lighting occurs, unplug the 
power cord and under no circumstance 
touch the antenna cable as this is danger-
ous.
• Otherwise, it may result in electric shock 
or fire.Avoid dropping an object over the product 
or cause impact to the product.
• Otherwise, it may result in electric shock 
or fire.
Avoid moving the product by pulling the 
power cord or antenna cable.
• Otherwise, it may result in electric 
shock, fire or a problem with the product 
due to damage to the cable.When a gas leak occurs, do not touch the 
product or the power plug and ventilate 
immediately.
• A spark may result in an explosion or 
fire.
• During a thunder or lighting storm, do 
not touch the power cord or antenna 
cable.
Avoid lifting up or move the product by hold-
ing only the power cord or signal cable.
• Otherwise, it may result in electric 
shock, fire or a problem with the product 
due to damage to the cable.Avoid using or placing inflammable spray or 
objects near the product.
• This may result in an explosion or fire.
Take care not to block the vent by a table 
cloth or curtain.
• Otherwise, it may result in fire due to 
internal overheating.Avoid inserting metal objects such as a 
chopsticks, coins or hairpins, or inflamma-
ble objects into the product (the vents, 
ports, etc).
• If water or an alien substance enters the 
product, turn the power off, unplug the 
power cord and contact a service center.
• Otherwise, it may result in a problem 
with the product, electric shock or fire.
Avoid placing a liquid container such as a 
vase, flowerpot, beverage, cosmetics or 
drugs, or a metal object over the product.
• If water or an alien substance enters the 
product, turn the power off, unplug the 
power cord and contact a  service 
center.
• Otherwise, it may result in a problem 
with the product, electric shock or fire.  
Displaying a still image for a long time may 
create a persistent image or stain on the 
screen.
• If you do not use the product for a long 
time, use the power-saving mode or set 
the screensaver to the moving picture 
mode.When not using the product for a long time 
such as leaving your home, unplug the 
power cord from the wall outlet.
• Otherwise, it may cause dust 
accumulation and result in fire caused 
by overheating or short circuit or result in 
an electric shock.
Set the appropriate resolution and fre-
quency for the product.
• Otherwise, it may result in eye strain.Avoid turning the product upside down or 
move the product holding only the stand.
• This may cause the product to fall 
resulting in damage to the product or 
injury.
 
						

							Major Safety Precautions1-3
Maintaining the Correct Posture when Using this Product 
Watching the product from too close a dis-
tance continuously may damage your eye-
sight.Avoid using a humidifier or cooker near the 
product.
• Otherwise, it may result in electric shock 
or fire.
It is important to give your eyes some rest (5 
minutes every hour) when viewing the prod-
uct screen for long periods of time.
• This will alleviate any eye strain.Since the display panel is hot after using it 
for a long time, do not touch the product.
Keep small accessories away from the chil-
dren.Take care when adjusting the angle of the 
product or the height of the stand.
• If your hand or finger is caught, you may 
be injured.
• If the product is tilted excessively, the 
product may fall and this may result in 
injury.
Avoid placing a heavy object over the prod-
uct.
• Otherwise, it may result in a problem 
with the product or injury.
Maintain the correct posture when using this product.
• Straighten your back.
• Keep a distance of 45~50 cm from your eyes to the screen. Look down at the screen and 
face the screen forwards.
• Maintain the correct posture when using this product. 
• Adjust the angle of the product so that light is not reflected onto the screen.
• Keep your elbow at a right angle and keep your arm level with the back of your hand.
• Keep your elbow at a right angle.
• Place your heels flat on the ground while keeping your knees at an angle of 90 degrees or 
higher and maintain the position of your arm so that your arm is below your heart.
 
						

							2-1Installing the Product
2 Installing the Product
2-1 Package Contents
 • Unpack the product and check if all of the following contents have been included.
• Store the packaging box in case you need to move the Product at a later stage.
 
Type 1
Monitor & HAS stand
 The cleaning cloth is supplied with black high-glossy models only. 
Contents
Installation ManualProduct Warranty
(Not available in all locations) User Manual D-Sub Cable 
Power Cord Stand
OPTIONAL PARTS
HDMI Cable DVI Cable Cleaning Cloth Stereo Cable
 
						

							Installing the Product2-1
Type 2
Monitor & Simple stand
 MagicRotation program can not be provided as Simple Stand does not support Pivot function. 
 The cleaning cloth is supplied with black high-glossy models only. 
Contents
Installation ManualProduct Warranty
(Not available in all locations) User Manual D-Sub Cable 
Power Cord Stand Stand Connector
OPTIONAL PARTS
HDMI Cable DVI Cable Cleaning Cloth Stereo Cable
 
						

							2-2Installing the Product
2-2 Installing the Stand
 Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. 
HAS stand
Place a soft cloth over the table to protect the product and place the product onto the 
cloth so that the front of the product is facing downwards.
 Do not remove
the stopper pin before installing the base. 
Hold the main body of the product with your hand as shown by the figure.
Insert the stand base into the stand connection part in the direction shown in the figure.
Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.
 
						

							Installing the Product2-2
 Disassembly is in the reverse order of the assembly. 
After the installation of the base, stand the monitor up as shown in the figure. Now you 
can remove the stopper pin to adjust the stand.
- Caution
Avoid lifting the product holding only the stand.
When pivot the monitor from horizontal to vertical,tilt the monitor backward to maxium 
first.
  . Stand Stopper
 
						

							2-2Installing the Product
Simple stand
Insert the Stand Connector into the Stand in the direction shown by the figure.
Check if the Stand Connector is firmly connected.
Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.
Place a soft cloth over the table to protect the product and place the product onto the 
cloth so that the front of the product is facing downwards.
 
						

							Installing the Product2-2
 Disassembly is in the reverse order of the assembly.
 
Hold the main body of the product with your hand as shown by the figure.
Push the assembled stand into the main body in the direction of the arrow as shown in 
the figure.
- Caution
Avoid lifting the product holding only the stand.

 
						

							2-3Installing the Product
2-3 Installing the Stand for the Wall Mount
This product provides a stand mount of 75 mm x 75 mm(3.0 x 3.0 inches) that complies with the VESA specifications.
HAS stand
Simple stand
1.Turn the product off and unplug the power cord from the wall outlet.
2.Place a soft cloth or cushion on a flat surface to protect the panel and place the product down on the cloth so that the front of 
the product faces downwards.
3.Separate the stand.
4.Align the groove of the part of the product that is to be connected to the stand with the groove in the stand (desk-top stand, 
wall mount stand or another stand) and firmly fix the stand by fastening the screw.
 • If you use a screw that is longer than the standard specifications, the inside of the product may be damaged.
• For wall mounts that are not compatible with the standard VESA specifications, the length of the screw may differ 
depending on the corresponding specifications.
• Do not use screws that are incompatible with the standard VESA specifications and do not assemble them using 
excessive force.
• This may result in damage to the product or injury due to the product falling.
• The company shall not be held liable for any damage or injury.
• The company shall not be held liable for any damage to the product or injury caused by using a stand that is not 
compatible with the specified specifications or due to an installation not performed by an authorized installation 
 Stand Mount
 Stand (Optional)