Samsung Syncmaster 960bf Quick Start Guide

 
  
 Manual  
 
 
Quick Setup Guide Warranty Card
 
(Not available in all 
locations) Users Guide,  
Monitor Driver,  
Natural Color software,  
MagicTune™ software,  
Ma
gicRotation software
 
 
    
 Cable
  
DVI-A to D-Sub Cable  Power Cord  DC-Adapter 
 
 
    
 Sold separately 
 
  
DVI Cable   
 
 
 
 Front  
 
 

  
 
 
Power indicator / 
Power button [ ] 
 
 
 
 
The blue light is on in its normal working condition and blinks when setting 
the adjustments of the monitor. 
Use this button for power the monitor  on and off, change the input source, 
or perform Auto Adjustment. 
Power On/Off  : When you press the power button, the monitor is 
on/off. 
>>Click here to see an animation clip
Input Source  : When you press the power button until the power button 
blinks once with blue light, the input source may be...

  
  
  
  
  
DC 14V Connect the DC adapter for your monitor to the power port on the back 
of the monitor. Plug the power cord for the monitor into a nearby outlet.  
DVI-I Connect the DVI-A to D-Sub Cable to the DVI port on the back of your 
monitor.  
 
See 
Connecting the Monitor  for further information re garding cable connections.
 

 
 
 
 
 
 
Connecting the Monitor 
1. Connect the DC 14V adapter for y
our monitor to the power port on the back of the monitor.  
Plug the power cord for the monitor into a nearby outlet.
2-1. Using the D-Sub (analog) connector on the video card. 
Connect the DVI-A to D-Sub
 Cable to the DVI-I port on the back of your monitor. 
 
2-2.Connected to a Macintosh. 
Connect the monitor to the Macintosh computer using the DVI-A to D-Sub connection cable.
2-3. In the case of an old model Macintosh, you need to...

 
Using the Stand 
 
 
 
   Pivot Stand 
 
Even when the monitor is completely folded, the monitor screen is still approximately 2 cm (0.8 
inch) off the floor. Do not press the monitor screen further against the floor.
This monitor cannot be  installed with a supporting device  (arm-support, wall bracket or other) 
other than the one provided.
  (When pivoting the monitor, rotation angle is displayed on screen of the monitor.) 
0° 90°
When pivoting the monitor, the co rner of the monitor may reach to...

backward more than 45 degrees and then pivot it. Failure to do so may damage the monitor. 
Installing the Monitor Driver (Automatic)
 
When prompted by the operating system for the monitor driver, insert the CD-ROM 
included with this monitor.  Driver installation is slightly different from one operating 
system to another. Follow the directions appropriate for the operating system you 
have.  
 
Prepare a blank disk and download the driver program file at the Internet web site shown 
here. 
 
zInternet...

 
 
4. If you can see following message window, then click the  Continue Anyway button. 
Then click  OK button. 
 
 
 
5. Monitor driver installation is completed. 
 
This monitor driver is under certified MS logo,and this installation doesnt 
damage your system.The certified dr iver will be posted on Samsung 
Monitor homepage.  
http://www.samsung.com/ . 
 
 
Installing the Monitor Driver (Manual) 
Windows XP | Windows 2000 |Windows Me |Windows NT  | Linux   
 
 
When prompted by the operating system fo...

     
 
3. Click  Display icon and choose the 
Settings tab then click 
Advanced... 
 
     
 
4. Click the  Properties button on the 
Monitor tab and select 
Driver tab.  
 
     
 
5. Click  Update Driver..  and select 
Install from a list or..  then click 
Next button.  
 
     
 
6. Select  Dont search ,I will..  then click 
Next and then click 
Have disk.  
 
 

     
 
7. Click the  Browse button then choose A:(D:\Driver) and
 choose your monitor model in the 
model list and click the  Next button.  
 
     
 
8. If you can see following message window, then click the  Continue Anyway button. Then 
click  OK button. 
 
  
 
This monitor driver is under certified MS logo,and this installation doesnt damage your 
system.The certified driver will be po sted on Samsung Monitor homepage. 
http://www.samsung.com/ 
 
9. Click the  Close button then click 
OK button...

     
 
10. Monitor driver installation is completed.  
 
 
 
    Microsoft® Windows® 2000 Operating System
 
 
When you can see Digital Signature Not Found on your monitor, follow these steps.
1. Choose  OK button on the 
Insert disk window.  
2. Click the  Browse button on the 
File Needed window.  
3. Choose A:(D:\Driver) then click the Open button and then click  OK button.  
How to install
1. Click  Start , 
Setting  , 
Control Panel .  
2. Double click the  Display Icon.  
3. Choose the  Settings...