Home > Samsung > Monitor > Samsung Syncmaster 940n Quick Start Guide

Samsung Syncmaster 940n Quick Start Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Samsung Syncmaster 940n Quick Start Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							General
    General
    Model Name SyncMaster 740B
    LCD Panel
    Size 17  Diagonal (43 cm)
    Display area 337.92 mm (H) x 270.336 mm (V)
    Pixel Pitch 0.264 mm (H) x 0.264 mm (V)
    Type a-si TFT active matrix
    Synchronization
    Horizontal 30 ~ 81 k Hz
    Vertical 56 ~ 75 Hz
    Display Color
    16.2 M Colors
    Resolution
    Optimum resolution 1280 x 1024@60 Hz
    Maximum resolution 1280 x 1024@75 Hz
    Input Signal, Terminated
    RGB Analog , DVI(Digital Visual Interface) Compliant Digital RGB  
    0.7Vp-p Positive at 75
     ±10%  
    Separate H/V sync, Composite sync, TTL level positive or negative.
    Maximum Pixel Clock
    140 MHz
    Power Supply
    AC 100 to 240 Vac(+/- 10%) ,60/50Hz ± 3 Hz
    Signal Cable
    15pin to 15pin D-sub cable, Detachable, 1.8 m 
    DVI-D to DVI-D connector, Detachable, 2.0 m (option)
    Power Consumption
     
    						
    							Less than 34 W 
    Dimensions (WxDxH)/ Weight (Simple Stand)
    366.0 x 200.0 x 391.2 mm / 14.4 x 7.9 x 15.4 inch (with Basic Stand) / 3.4 kg
    Dimensions (WxDxH)/ Weight (Pivot Stand)
    366.0 x 200.0 x 391.2 mm / 14.4 x 7.9 x 15.4 inch (with Basic Stand) / 4.7 kg
    Dimensions (WxDxH)/ Weight (Sliding Stand)
    366.0 x 200.0 x 391.2 mm / 14.4 x 7.9 x 15.4 inch (with Basic Stand) / 4.7 kg
    VESA Mounting Interface
    75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.)
    Environmental considerations
    Operating Temperature: 50 °F ~ 104 °F (10 °C ~ 40 °C)  
    Humidity: 10% ~ 80%, non-condensing
    Storage Temperature: -4 °F ~113 °F (-20 °C ~ 45 °C)  
    Humidity: 5% ~ 95%, non-condensing
    Plug and Play Capability
    This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and 
    computer systems will provide the best operating conditions and monitor settings. In most cases, 
    monitor installation will proceed automatically, unless the user wishes to select alternate settings.
    Dot Acceptable
    TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm 
    (one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE 
    color seem to be bright sometimes or some of black pixels could be seen. This is not from bad 
    quality and you can use it without uneasiness. 
    zFor example, the number of TFT LCD sub pixels that is contained in this product are 3,932,160.  
    Note: Design and specifications are subject to change without prior notice.
    PowerSaver
    This monitor has a built-in power management system called PowerSaver. This system saves energy 
    by switching your monitor into a low-power mode when it has not been used for a certain amount of 
    time. The monitor automatically returns to normal operation when you press a key on the keyboard. For 
    energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for 
    long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in 
    your computer. Use a software utility installed on your computer to set up this feature. 
    StateNormal 
    OperationPower saving 
    mode 
    EPA/ENERGY
    2000Power off 
    (Power button) Power off 
    (Power Switch) 
    Power Indicator Blue Blue, Blinking Black Black
    Power
    ConsumptionLess than 34 WLess than 1 W  
    (Off-mode)Less than 1 W 
    (120 Vac / 220 
    Vac)Less than 0 W
    This monitor is EPA ENERGY STAR
    ® compliant and ENERGY2000 
    compliant when used with a computer equipped with VESA DPMS 
    functionality. 
    As an ENERGY STAR
    ® Partner, SAMSUNG has determined that this 
    product meets the ENERGY STAR® guidelines for energy efficiency.
     
    						
    							Preset Timing Modes
    If the signal transferred from the computer is the same as the following Preset Timing Modes, the 
    screen will be adjusted automatically. However, if the signal differs, the screen may go blank while 
    the power LED is on. Refer to the video card manual and adjust the screen as follows.  
    Table 1. Preset Timing Modes 
    Display ModeHorizontal
    Frequency 
    (kHz)Vertical
    Frequency 
    (Hz) Pixel Clock 
    (MHz) Sync Polarity 
    (H/V)
    IBM, 640 x 350  31.469  70.086  25.175  +/- 
    IBM, 640 x 480  31.469  59.940  25.175  -/- 
    IBM, 720 x 400  31.469  70.087  28.322  -/+ 
    MAC, 640 x 480  35.000  66.667  30.240  -/- 
    MAC, 832 x 624  49.726  74.551  57.284  -/- 
    MAC, 1152 x 870  68.681  75.062  100.00  -/- 
    VESA, 640 x 480  37.500  75.000  31.500  -/- 
    VESA, 640 x 480  37.861  72.809  31.500  -/- 
    VESA, 800 x 600  35.156  56.250  36.000  -/- 
    VESA, 800 x 600  37.879  60.317  40.000  +/+ 
    VESA, 800 x 600  46.875  75.000  49.500  +/+ 
    VESA, 800 x 600  48.077  72.188  50.000  +/+ 
    VESA, 1024 x 768  48.363  60.004  65.000  -/- 
    VESA, 1024 x 768  56.476  70.069  75.000  -/- 
    VESA, 1024 x 768  60.023  75.029  78.750  +/+ 
    VESA, 1152 x 864  67.500  75.000  108.00  +/+ 
    VESA, 1280 x 1024  63.981  60.020  108.00  +/+ 
    VESA, 1280 x 1024  79.976  75.025  135.00  +/+ 
    Horizontal Frequency
    The time to scan one line connecting the right edge to the left edge of 
    the screen horizontally is called Horizontal Cycle and the inverse 
    number of the Horizontal Cycle is called Horizontal Frequency. Unit: 
    kHz
    Vertical Frequency
    Like a fluorescent lamp, the screen has to repeat the same image 
    many times per second to display an image to the user. The 
     
    						
    							frequency of this repetition is called Vertical Frequency or Refresh 
    Rate. Unit: Hz
     
    						
    							General
    General
    Model Name SyncMaster 940B
    LCD Panel
    Size 19  Diagonal (48 cm)
    Display area 376.32 mm (H) x 301.056 mm (V)
    Pixel Pitch 0.294 mm (H) x 0.294 mm (V)
    Type a-si TFT active matrix
    Synchronization
    Horizontal 30 ~ 81 k Hz
    Vertical 56 ~ 75 Hz
    Display Color
    16.7 M Colors 
    Resolution
    Optimum resolution 1280 x 1024@60 Hz
    Maximum resolution 1280 x 1024@75 Hz
    Input Signal, Terminated
    RGB Analog , DVI(Digital Visual Interface) Compliant Digital RGB  
    0.7Vp-p Positive at 75 
     ±10%  
    Separate H/V sync, Composite sync, SOG, TTL level positive or negative.
    Maximum Pixel Clock
    140 MHz
    Power Supply
    AC 100 to 240 Vac(+/- 10%) ,60/50Hz ± 3 Hz
    Signal Cable
    15pin to 15pin D-sub ca ble, Detachable, 1.8 m 
    DVI-D to DVI-D connector,  Detachable, 2.0 m (option)
    Power Consumption
     
    						
    							Less than 38 W 
    Dimensions (WxDxH)/ Weight (Simple Stand)
    407.6 x 217.0 x 421.5mm / 16.0 x 8.5 x 16.6 inch (with Basic Stand) / 4.85 kg
    Dimensions (WxDxH)/ Weight (Pivot Stand)
    407.6 x 200.0 x 408.0mm / 16.0 x 7.9 x 16.1 inch (with Basic Stand) / 5.55 kg
    Dimensions (WxDxH)/ Weight (Sliding Stand)
    407.6 x 200.0 x 408.0mm / 16.0 x 7.9 x 16.1 inch (with Basic Stand) / 5.7 kg
    VESA Mounting Interface
    75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.)
    Environmental considerations
    Operating Temperature: 50 °F ~ 104 °F (10 °C ~ 40 °C)  
    Humidity: 10% ~ 80%, non-condensing
    Storage Temperature: -4 °F ~113 °F (-20 °C ~ 45 °C)  
    Humidity: 5% ~ 95%, non-condensing
    Plug and Play Capability
    This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and 
    computer systems will provide the best operating conditions and monitor settings. In most cases, 
    monitor installation will proceed automatically, unless the user wishes to select alternate settings.
    Dot Acceptable
    TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm 
    (one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE 
    color seem to be bright sometimes or some of black pixels could be seen. This is not from bad 
    quality and you can use it without uneasiness. 
    zFor example, the number of TFT LCD sub pixels that is contained in this product are 3,932,160.  
    Note: Design and specifications are subject to change without prior notice.
    PowerSaver
    This monitor has a built-in power management system called PowerSaver. This system saves energy 
    by switching your monitor into a low-power mode when it has not been used for a certain amount of 
    time. The monitor automatically returns to normal operation when you press a key on the keyboard. For 
    energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for 
    long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in 
    your computer. Use a software utility installed on your computer to set up this feature. 
    StateNormal 
    OperationPower saving 
    mode 
    EPA/ENERGY
    2000Power off 
    (Power button) Power off 
    (Power Switch) 
    Power Indicator Blue Blue, Blinking Black Black
    Power
    ConsumptionLess than 38 WLess than 1 W  
    (Off-mode)Less than 1 W 
    (120 Vac / 220 
    Vac)Less than 0 W
    This monitor is EPA ENERGY STAR
    ® compliant and ENERGY2000 
    compliant when used with a computer equipped with VESA DPMS 
    functionality. 
    As an ENERGY STAR
    ® Partner, SAMSUNG has determined that this 
    product meets the ENERGY STAR® guidelines for energy efficiency.
     
    						
    							Preset Timing Modes
    If the signal transferred from the computer is the same as the following Preset Timing Modes, the 
    screen will be adjusted automatically. However, if the signal differs, the screen may go blank while 
    the power LED is on. Refer to the video card manual and adjust the screen as follows.  
    Table 1. Preset Timing Modes 
    Display ModeHorizontal
    Frequency 
    (kHz)Vertical
    Frequency 
    (Hz) Pixel Clock 
    (MHz) Sync Polarity 
    (H/V)
    IBM, 640 x 350  31.469  70.086  25.175  +/- 
    IBM, 640 x 480  31.469  59.940  25.175  -/- 
    IBM, 720 x 400  31.469  70.087  28.322  -/+ 
    MAC, 640 x 480  35.000  66.667  30.240  -/- 
    MAC, 832 x 624  49.726  74.551  57.284  -/- 
    MAC, 1152 x 870  68.681  75.062  100.00  -/- 
    VESA, 640 x 480  37.500  75.000  31.500  -/- 
    VESA, 640 x 480  37.861  72.809  31.500  -/- 
    VESA, 800 x 600  35.156  56.250  36.000  -/- 
    VESA, 800 x 600  37.879  60.317  40.000  +/+ 
    VESA, 800 x 600  46.875  75.000  49.500  +/+ 
    VESA, 800 x 600  48.077  72.188  50.000  +/+ 
    VESA, 1024 x 768  48.363  60.004  65.000  -/- 
    VESA, 1024 x 768  56.476  70.069  75.000  -/- 
    VESA, 1024 x 768  60.023  75.029  78.750  +/+ 
    VESA, 1152 x 864  67.500  75.000  108.00  +/+ 
    VESA, 1280 x 1024  63.981  60.020  108.00  +/+ 
    VESA, 1280 x 1024  79.976  75.025  135.00  +/+ 
    Horizontal Frequency
    The time to scan one line connecting the right edge to the left edge of 
    the screen horizontally is called Horizontal Cycle and the inverse 
    number of the Horizontal Cycle is called Horizontal Frequency. Unit: 
    kHz
    Vertical Frequency
    Like a fluorescent lamp, the screen has to repeat the same image 
    many times per second to display an image to the user. The 
     
    						
    							frequency of this repetition is called Vertical Frequency or Refresh 
    Rate. Unit: Hz
     
    						
    							General
    General
    Model Name SyncMaster 740N
    LCD Panel
    Size 17  Diagonal (43 cm)
    Display area 337.92 mm (H) x 270.336 mm (V)
    Pixel Pitch 0.264 mm (H) x 0.264 mm (V)
    Type a-si TFT active matrix
    Synchronization
    Horizontal 30 ~ 81 k Hz
    Vertical 56 ~ 75 Hz
    Display Color
    16.2 M Colors
    Resolution
    Optimum resolution 1280 x 1024@60 Hz
    Maximum resolution 1280 x 1024@75 Hz
    Input Signal, Terminated
    RGB Analog  
    0.7Vp-p Positive at 75
     ±10%  
    Separate H/V sync, Composite sync, TTL level positive or negative.
    Maximum Pixel Clock
    140 MHz
    Power Supply
    AC 100 to 240 Vac(+/- 10%) ,60/50Hz ± 3 Hz
    Signal Cable
    15pin to 15pin D-sub ca ble, Detachable, 1.8 m 
    Power Consumption
     
    						
    							Less than 34 W 
    Dimensions (WxDxH)/ Weight (Simple Stand)
    366.0 x 200.0 x 391.2 mm / 14.4 x 7.9 x 15.4 inch (with Basic Stand) / 3.4 kg
    Dimensions (WxDxH)/ Weight (Pivot Stand)
    366.0 x 200.0 x 391.2 mm / 14.4 x 7.9 x 15.4 inch (with Basic Stand) / 4.7 kg
    Dimensions (WxDxH)/ Weight (Sliding Stand)
    366.0 x 200.0 x 391.2 mm / 14.4 x 7.9 x 15.4 inch (with Basic Stand) / 4.7 kg
    VESA Mounting Interface
    75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.)
    Environmental considerations
    Operating Temperature: 50 °F ~ 104 °F (10 °C ~ 40 °C)  
    Humidity: 10% ~ 80%, non-condensing
    Storage Temperature: -4 °F ~113 °F (-20 °C ~ 45 °C)  
    Humidity: 5% ~ 95%, non-condensing
    Plug and Play Capability
    This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and 
    computer systems will provide the best operating conditions and monitor settings. In most cases, 
    monitor installation will proceed automatically, unless the user wishes to select alternate settings.
    Dot Acceptable
    TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm 
    (one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE 
    color seem to be bright sometimes or some of black pixels could be seen. This is not from bad 
    quality and you can use it without uneasiness. 
    zFor example, the number of TFT LCD sub pixels that is contained in this product are 3,932,160.  
    Note: Design and specifications are subject to change without prior notice.
    PowerSaver
    This monitor has a built-in power management system called PowerSaver. This system saves energy 
    by switching your monitor into a low-power mode when it has not been used for a certain amount of 
    time. The monitor automatically returns to normal operation when you press a key on the keyboard. For 
    energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for 
    long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in 
    your computer. Use a software utility installed on your computer to set up this feature. 
    StateNormal 
    OperationPower saving 
    mode 
    EPA/ENERGY
    2000Power off 
    (Power button) Power off 
    (Power Switch) 
    Power Indicator Blue Blue, Blinking Black Black
    Power
    ConsumptionLess than 34 WLess than 1 W  
    (Off-mode)Less than 1 W 
    (120 Vac / 220 
    Vac)Less than 0 W
    This monitor is EPA ENERGY STAR
    ® compliant and ENERGY2000 
    compliant when used with a computer equipped with VESA DPMS 
    functionality. 
    As an ENERGY STAR
    ® Partner, SAMSUNG has determined that this 
    product meets the ENERGY STAR® guidelines for energy efficiency.
     
    						
    All Samsung manuals Comments (0)

    Related Manuals for Samsung Syncmaster 940n Quick Start Guide