Samsung Syncmaster 931bf Quick Start Guide

							 
 Monitor Assembly
Monitor and Bottom  
 
 
 
Attaching a Base
This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad.
 
A. Monitor  
 
B. Mounting interface pad (Sold separately)  
 
Turn off your monitor and unplug its power cord.
Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the 
screen.
Remove three screws and then remove the stand from the LCD monitor.
Align the mounting interface pad with the holes in the rear cover mounting Pad and 
secure it with four screws that came with the arm-type base, wall mount hanger or other 
base.
 
						

							 
 
 
 
 Monitor Driver 
When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the 
directions appropriate for the operating system you have.    
Prepare a blank disk and download the driver program file at the Internet web site shown here.  
 
Internet web site : http://www.samsung.com/  (Worldwide)
http://www.samsung.com/monitor  (U.S.A)
http://www.sec.co.kr/monitor (Korea)
http://www.samsungmonitor.com.cn/  (China)
Installing the Monitor Driver (Automatic)
Windows ME  
 
Insert CD into the CD-ROM drive.
Click Windows ME Driver.
Choose your monitor model in the model list, then click the OK button.  
 
 
Click the Install button in the Warning window.  
  
 
Monitor driver installation is completed. 
SyncMaster 731B / 931B / 731BF / 931BF
 
						

							 
 
 
 
 
Windows XP/2000  
 
Insert CD into the CD-ROM drive. 
Click Windows XP/2000 Driver.
Choose your monitor model in the model list, then click the OK button.  
 
 
If you can see following message window, then click the Continue Anyway button. Then click 
OK button.  
  
 
 
 
This monitor driver is under certifying MS logo, and this installation dont damage your 
system.  
The certified driver will be posted on Samsung Monitor homepage  
 
http://www.samsung.com/ 
Monitor driver installation is completed. 
Installing the Monitor Driver (Manual)
Windows XP | Windows 2000 | Windows ME | Windows NT | Linux 
Microsoft® Windows® XP Operating System  
 
Insert CD into the CD-ROM drive.
Click Start 
→ Control Panel then click the Appearance and Themes icon.  
  
 
Click Display icon and choose the Settings tab then click Advanced....  
 
						

							  
 
Click the Properties button on the Monitor tab and select Driver tab.  
     
 
Click Update Driver... and select Install from a list or... then click Next button.  
   
 
Select Dont search ,I will... then click Next and then click Have disk.  
  
 
Click the Browse button then choose A:(D:\Driver) and choose your monitor model in the model 
list and click the Next button.  
 
						

							 
   
 
If you can see following Message window, then click the Continue Anyway button. Then click 
OK button.  
 
 
 
 
This monitor driver is under certifying MS logo, and this installation dont damage your 
system.  
The certified driver will be posted on Samsung Monitor homepage  
 
http://www.samsung.com/ 
Click the Close button then click OK button continually.  
  
 
Monitor driver installation is completed.  
 
Microsoft® Windows® 2000 Operating System  
 
 When you can see Digital Signature Not Found on your monitor, follow these steps.  
 
 
Choose OK button on the Insert disk window. 
Click the Browse button on the File Needed window. 
Choose A:(D:\Driver) then click the Open button and then click OK button. 
 
						

							 
 
 
 
 
 
  How to install 
Click Start , Setting , Control Panel. 
Double click the Display icon. 
Select the Settings tab and click Advanced Properties button. 
Choose Monitor.  
Case1 : If the Properties button is inactive, it means your monitor is properly configured. Please 
stop installation 
Case2 : If the Properties button is active, click the Properties button then follow next steps 
continually.
Click Driver and then click on Update Driver... then click on the Next button. 
Choose Display a list of the known drivers for this device so that I can choose a specific driver 
then click Next and then click Have disk.
Click the Browse button then choose A:(D:\Driver). 
Click the Open button, then click OK button. 
Choose your monitor model and click the Next button then click Next button. 
Click the Finish button then the Close button.  
 
If you can see the Digital Signature Not Found window then click the Yes button. And click the 
Finish button then the Close button. 
Microsoft® Windows® Millennium Operating System    
 
Click Start , Setting , Control Panel. 
Double click the Display icon. 
Select the Settings tab and click Advanced Properties button. 
Select the Monitor tab. 
Click the Change button in the Monitor Type area. 
Choose Specify the location of the driver. 
Choose Display a list of all the driver in a specific location... then click Next button. 
Click the Have Disk button. 
Specify A:\(D:\driver) then click OK button. 
Select Show all devices and choose the monitor that corresponds to the one you connected to 
your computer and click OK. 
Continue choosing Close button and OK button until you close the Display Properties dialogue 
box. 
Microsoft® Windows® NT Operating System    
 
Click Start, Settings, Control Panel, and then double-click Display icon.
In Display Registration Information window, click Settings Tab and then click All Display Modes.
Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) and 
then click OK. 
Click Apply button if you see the screen working normally after clicking Test. If the screen is 
not normal, change to a different mode (lower mode of resolution, colors or frequency). 
If there is no Mode at All Display Modes, select the level of resolution and vertical 
frequency by referring to the Preset Timing Modes in the user guide.
Linux Operating System    
 
To execute X-Window, you need to make the X86Config file, which is a type of system setting file.  
 
Press Enter at the first and the second screen after executing the X86Config file. 
The third screen is for setting your mouse. 
Set a mouse for your computer. 
The next screen is for selecting a keyboard. 
Set a Keyboard for your computer. 
The next screen is for setting your monitor. 
First of all, set a horizontal frequency for your monitor. (You can enter the frequency directly.) 
Set a vertical frequency for your monitor. (You can enter the frequency directly.) 
Enter the model name of your monitor. This information will not affect the actual execution of X-
Window. 
You have finished setting up your monitor.  
Execute X-Window after setting other requested hardware. 
 
						

							 
 
 
 
 
 Natural Color
Natural Color Software Program
One of the recent problems in using a computer is that the color of the images printed out by a printer 
or other images scanned by a scanner or a digital camera are not the same as those shown on the 
monitor. The Natural Color S/W is the very solution for this problem. It is a color administration 
system developed by Samsung Electronics in association with Korea Electronics & 
Telecommunications Research Institute (ETRI). This system is available only for Samsung monitors 
and makes the color of the images on the monitor the same as the printed or scanned images.  
For more information, refer to Help (F1) in the software program.  
How to install the Natural Color software 
Insert the CD included with the Samsung monitor into the CD-ROM Drive. Then, the initial screen of 
the program Natural Color will be executed. Click Natural Color on the initial screen to install the 
Natural Color software.  
 
To install the program manually, insert the CD included with the Samsung monitor into the CD-ROM 
Drive, click the [Start] button of Windows and then select [Run...].  
Enter D:\color\eng\setup.exe and then press the [Enter] key.  
(If the drive where the CD is inserted is not D:\, enter the applicable drive.)  
How to delete the Natural Color software program
Select Setting/Control Panel on the Start menu and then double-click Add/Delete a program.  
Select Natural Color from the list and then click the Add/Delete button.
 
 
 
 
      
Overview     |   Installation     |   OSD Mode   |   Color Calibration   |   Uninstall     |   Troubleshooting       
 
 
 
Overview 
 
						

							 
 
  
 
 
What is Ma
gicTune™?  
Monitor performance can vary due to the graphics card, host computer lighting conditions and other 
environmental factors. In order to get the best image on a monitor requires you to adjust it for your unique 
setting. Unfortunately, the manual controls available to tune the image often prove to be challenging. 
Proper adjustment (tuning) requires an easy to use program that goes through a step-by-step process to 
obtain the best overall picture quality. 
 
In most cases even simple adjustments to Brightness, or Contrast require navigation of the multi-level, on-
screen display (OSD) menus that are not easy to understand. Furthermore, there is no feedback to assist 
in correctly setting the controls of the monitor. MagicTune™ is a software utility that guides you through 
the tuning process with easy to understand instructions and back ground patterns designed for each 
monitor control. The display settings for each user can be saved, providing an easy way to select display 
characteristics in a multi-user environme or having a single user have multiple defined presets based on 
content and ambient lighting. 
 
 
 
 
Basic Functionalit
y 
MagicTune™ is a software utility that allows monitor adjustment and color tuning using the Display Data 
Channel Command Interface (DDC/CI) protocol.  All adjustments to the display are controlled via software 
to eliminate the need to use the monitor on-screen display (OSD).  
MagicTune™ supports Windows™ 98 SE, Me, 2000, XP Home, and XP Professional.  
It is recommended using MagicTune™ in Windows™ 2000 or later. 
 
MagicTune™ allows for quick accurate tuning of the display with the ability to easily save and use monitor 
configurations that are best suited for you. 
 
 
 
 
OSD Mode
 
The OSD mode allows easy adjustment of monitor settings without taking pre-defined steps. You can 
access the desired menu item to set with ease.
 
 
      Overview     |   
Installation     |   OSD Mode   |   Color Calibration   |   Uninstall     |   Troubleshooting       
 
 
 
Installation 
 
 
1. Insert the installation CD into the CD-ROM drive.  
2. Click the MagicTune™ installation file.  
3. Select installation Language, Click Next. 
  
 
4. When the InstallationShield Wizard window appears, click Next.  
 
						

							  
 
5. Select I agree to the terms of the license agreement to accept the terms of use.  
  
 
6. Choose a folder to install the MagicTune™ program. 
  
 
7. Click Install. 
 
						

							  
 
8. The Installation Status window appears. 
  
 
9. Click Finish. 
  
 
10. When the installation is complete, the MagicTune™ executable icon appears on your desktop.