Samsung Syncmaster 931bf Quick Start Guide

Double-click the icon to start the program. 
 
 
 
MagicTune™ execution icon may not appear depending on specification 
of computer system or monitor.  
If that happens, press F5 Key.
 
  
 
 
Installation Problems 
 
The installation of MagicTune™ can be affected by such factors as the video card, motherboard and the 
network environment.  
See Troubleshooting if you have trouble during installation. 
 
 
 
 
S
ystem Requirements 
OS 
zWindows™ 98 SE  zWindows™ Me  zWindows™ 2000  zWindows™ XP Home...

 
 
 
 
 
Button Tab Definition 
 
 
OK   
Applies any changes made and exits MagicTune™.  
 
Reset   
Restores the display settings to the factory settings.  
 
Cancel  
 
Exits MagicTune™ without applying the changes made. If you have not made any 
changes in the control window, clicking Cancel does not cause any actions.  
 
 
 
 
 
 
Picture Tab Definition 
 
 
Allows the user to adjust the screen settings to the desired values.  
 
 
 
Brightness  
 
Makes the entire screen brighter or darker. The...

  
 
Color Tone 
 
The tone of the color can be changed. 
zWarm2 - Warm1 - Cool 1 - Cool 2 - Cool 3 - Cool 4 - Cool 5 - Cool 6 - Cool 7  zOff  
  
 
Color Tone mode will be different according to monitor models. 
Some monitor will only support Four modes( Warm, Normal, Cool, 
Custom) 
 
Color Control 
 
Adjusts of the monitor image color. 
You can change the monitor color to your desired color.  
zR- G - B  
Calibration 
 
The process through which the colors of your choice are optimized and maintained....

closing the MagicZone after adjusting. will not show MagicTune™ 
again. 
(System Tray is Checked)  
 
zMagicColor mode will be different according to monitor models. 
MagicZone mode will show if the monitor supports the function.  
 
Gamma 
 
Gamma correction changes the luminance of the colors with intermediate luminance. 
 
  
 
Gamma mode will be different according to monitor models. Some 
monitor will only support Three modes.( Mode1, Mode2, Mode3) 
 
 
 
 
 
 
Ima
ge Tab Definition  
 
Adjusts the...

Help  
 
Visit the MagicTune™ website or click to open the Help files (User Manual) if you need 
any help installing or running MagicTune™. The User Manual opens within a basic 
browser window.  
 
Asset ID 
 
you can use the server to control the Client monitor. 
(Server program should be installed to use this program as Client)  
 
User Name   
Shows the user name that is registered in PC. 
 
User ID   
Shows the user ID that is register in PC. 
 
Server IP   
Write down the server IP .  
 
Department...

 
 
Press Preview button on the Color Calibration.  
The above picture will be shown. 
1. Press View Calibrated button to see the calibration effect which you adjusted.  
2. Press View Uncalibrated button to see the original image.  
 
 
      Overview     |   Installation     |   OSD Mode   |   Color Calibration   |   
Uninstall     |   Troubleshooting       
 
 
 
Uninstall 
 
 
The MagicTune™ program can be removed only by using the Add or Remove Programs option of the 
Windows™ Control Panel....

 Please visit our homepage to see the Troubleshooting section. 
 
An error may occur if the card maker has modified the video card driver or the graphics 
chip even when the video card is in the list. 
 
Please visit our homepage to see the Troubleshooting section. 
 
Check if your monitor is manufactured by Samsung. 
Products from other manufacturers may cause errors.  
 
Only Samsung products are able to support this feature. 
 
An error may occur even when your monitor is manufactured by Samsung but...

 Some of Samsung CDT monitors support the Highlight feature. 
When using both the Highlight feature and MagicTune™ simultaneously, conflicts occur, 
which cause errors. 
 
Make sure to turn OFF Highlight before using MagicTune™. 
 
 
 
 
Troubleshooting 
 
 
zMagicTune™ may not work in case monitor is replaced or driver of graphic card is updated while 
MagicTune™ is operating. If so, please restart the system. 
 
Symptom Check List Solutions
Check when 
MagicTune™ does not 
function properly. MagicTune™...

 
 
 
 Control Buttons 
 
[MENU /  ] Opens the OSD menu. Also use to exit the OSD menu or return to the 
previous menu. 
[ ] These buttons allow you to adjust items in the menu.
[ ] Press this button to activate a highlighted menu item. 
[AUTO] When the AUTO button is pressed, the Auto Adjustment screen appears as 
shown in the animated screen on the center.
 
 Direct Functions 
AUTO
SyncMaster 731B / 931B
 

 
 
 
 
Menu Description
AUTO When the AUTO button is pressed, the Auto Adjustment screen appears as 
shown in the animated screen on the center.  
Auto adjustment allows the monitor to self-adjust to the incoming Analog signal. 
The values of fine, coarse and position are adjusted automatically.  
(Available in Analog mode only)  
 
 
To make the automatic adjustment function sharper, execute the AUTO function 
while the AUTO PATTERN is on.  
 
If auto adjustment does not work properly, press AUTO...