Samsung Syncmaster 920nw Quick Start Guide

1. Click 
Start , 
Setting , 
Control Panel.  
2. Double click the 
Display Icon.  
3. Choose the 
Settings tab and then click 
Advanced...  
4. Choose 
Monitor.  
5. Click 
Driver and then click on 
Update Driver.. then click on the Next button.  
6. Choose 
Display a list of the known drivers for this device so that I can choose a 
specific driver then click 
Next and then click 
Have disk.  
7. Click the 
Browse button then choose A:(D:\Driver).  
8. Click the 
Open button, then click 
OK button.  
9....

 
 
1. [ ]Use this button to open the on-screen menu and exit from the menu screen or close screen 
adjustment menu. 
2. [ ]These buttons allow you to adjust items in the menu.
3. [ ]Press this button to activate a highlighted menu item.
4. [
AUTO ]Press to self-adjust to the incoming PC signal. The values of fine,coarse and position are 
adjusted automatically.
 
 AUTO 
 

Menu Description
AUTO When the 
AUTO button is pressed, the Auto Adjustment screen appears 
as shown in the animated screen on the center. 
Auto adjustment allows the monitor to self-adjust to the incoming video 
signal. The values of fine, coarse and position are adjusted automatically.  
(Available in analog mode only) 
 
To make the automatic adjustment function sharper, execute the AUTO 
function while the AUTO PATTERN is on. 
 
- If auto adjustment does not work properly, press AUTO button again to...

 
 
 When pressing the MENU button after locking the OSD
 
Menu Description
LockedThis is the function that locks the OSD in order to keep the current states of 
settings or prevent others from adjusting the current settings.  
 
Lock : Hold down the menu button for more than five seconds to activate 
the OSD adjustment lock function. 
 
Unlock : Hold down the menu button for more than five seconds to 
deactivate the OSD adjustment lock function. 
 
Though the OSD adjustment lock function is activated,...

 MagicBright™ 
 
Menu Description
 
MagicBright™Then push the MagicBright button again to circle through available 
preconfigured modes. 
- Four different modes(Custom/Text/Internet/Entertain) 
 
 
 Brightness 
Menu Description
 
BrightnessWhen OSD is not on the screen, push the button to adjust brightness.
 
 
 

 
 
 
  Picture Brightness Contrast
  Color Color Tone Color Control Gamma
  Image Coarse Fine Sharpness H-Position V-Position
  OSD Language H-Position V-Position Transparency Display Time
  Setup Image Reset Color Reset
  Information
 Picture  
Menu Description Play/Stop
BrightnessYou can use the on-screen menus to change the 
brightness according to personal preference.  
 
Direct Access Feature : When OSD is not on the screen, 
push the [   ] button to adjust brightness.  
 
[MENU →
  →
  →
 ,  →...

Menu Description Play/Stop
Color ToneThe tone of the color can be changed and one of four 
modes can be selected - Cool, Normal, Warm and 
Custom.  
[MENU →
 ,  →
  →
 ,  →
  →
 ,  →
 MENU]
Cool- Makes whites bluish.
Normal- Keeps whites white.
Warm- Makes whites reddish.
Custom- Select this mode when you want to adjust 
the image according to your preferences.
Color ControlAdjusts individual R,G,B color balance. 
 [MENU →
 ,  →
  →
 ,  →
  →
 ,  →
  →
 ,  →
 MENU]
GammaGamma correction changes the...

Menu Description Play/Stop
CoarseRemoves noise such as vertical stripes. Coarse 
adjustment may move the screen image area. You may 
relocate it to the center using the horizontal control menu. 
(Available in analog mode only) 
 
[MENU →
 ,  →
  →
  →
 ,  →
 MENU]
Fine Removes noise such as horizontal stripes. If the noise 
persists even after fine tuning, repeat it after adjusting the 
frequency (clock speed). 
(Available in analog mode only) 
 
[MENU →
 ,  →
  →
 ,  →
  →
 ,  →
 MENU]
SharpnessChanges...

Menu Description Play/Stop
LanguageYou can choose one of 9 languages. 
 
Note:The language chosen affects only the language of 
the OSD. It has no effect on any software running on the 
computer. 
 
[MENU →
 ,  →
  →
  →
 ,  →
 MENU]
H-PositionYou can change the horizontal position where the OSD 
menu appears on your monitor. 
 
[MENU →
 ,  →
  →
 ,  →
  →
 ,  →
 MENU]
V-PositionYou can change the vertical position where the OSD menu 
appears on your monitor. 
 
[MENU →
 ,  →
  →
 ,  →
  →
 ,  →
 MENU]...

Menu Description Play/Stop
Image ResetImage parameters are replaced with the factory default 
values. 
 
[MENU →
 ,  →
  →
 ,  →
  →
 ,  →
 MENU]
Color ResetColor parameters are replaced with the factory default 
values. 
 
[MENU →
 ,  →
  →
 ,  →
  →
 ,  →
 MENU]
 
 
 
 
 Information