Samsung Syncmaster 913n Quick Start Guide

Menu Description Play/Stop
Image ResetImage parameters are replaced with the factory default 
values.
Color ResetColor parameters are replaced with the factory default 
values.
 
 
 
 Information   
Menu Description
InformationShows a video source, display mode on the OSD screen. 
 

 
 
 AUTO 
SyncMaster912T/913T/913B/901B
1.[ ]Use this button to open the on-screen menu and exit from the menu screen or close screen 
adjustment menu. 
2.[ ]This button allows you to adjust items in the menu.
3.[ ]This button allows you to adjust items in the menu.
4.[ ]Press this button to activate a highlighted menu item.
5.[
AUTO ]Press to self-adjust to the incoming PC signal. The values of fine,coarse and position are 
adjusted automatically.
 
 

Menu Description
AUTO When the 
AUTO button is pressed, the auto adjustment screen appears 
as shown in the animated screen on the center. 
Auto adjustment allows the monitor to self-adjust to the incoming video 
signal. The values of fine, coarse and position are adjusted automatically.  
(Available in analog mode only) 
 
 
To make the automatic adjustment function sharper, execute the AUTO 
function while the AUTO PATTERN is on. 
zIf auto adjustment does not work properly, press auto button again to...

- four different modes(Custom/Text/Internet/Entertain) 
 
 Brightness 
Menu Description
BrightnessWhen OSD is not on the screen, push the button to adjust brightness.
 
 SOURCE 
 
Menu Description
SOURCESelects the video signal while the OSD is off. 
 
 
1. Picture BrightnessContrast
 

2. Color Color ToneColor ControlGamma
3. Image CoarseFineSharpnessH-PositionV-Position
4. OSD LanguageH-PositionV-PositionTransparencyDisplay Time
5. Setup Auto SourceImage ResetColor Reset
6. Information
 Picture   
Menu Description Play/Stop
BrightnessYou can use the on-screen menus to change the 
brightness according to personal preference.  
Direct Access Feature : When OSD is not on the screen, 
Push the button to adjust brightness. 
ContrastYou can use the on-screen menus to change the contrast...

Menu Description Play/Stop
Color ToneThe tone of the color can be changed and one of four 
modes can be selected - Cool, Normal, Warm and 
Custom.
Color ControlAdjusts individual R,G,B color balance.
GammaSelect one of three pre-defined gammas. zMode 1 : Shows normal gamma  
zMode 2 : Shows higher gamma(brighter)  
zMode 3 : Shows lower gamma(darker)  
 
 
 
 Image   
Menu Description Play/Stop
Removes noise such as vertical stripes. Coarse 
 

Coarseadjustment may move the screen image area. You may 
relocate it to the center using the horizontal control menu. 
(Available in analog mode only)
Fine Removes noise such as horizontal stripes. If the noise 
persists even after fine tuning, repeat it after adjusting the 
frequency (clock speed). 
(Available in analog mode only)
SharpnessChanges the clearance of image.
H-PositionChanges the horizontal position of the monitors entire 
display. 
(Available in analog mode only)
V-PositionChanges the...

You can set the amount of time the menu will wait before it 
is turned off.
 
 
 
 
 Setup   
Menu Description Play/Stop
Auto SourceSelect 
Auto Source for the monitor to automatically select 
the signal source.
Image ResetImage parameters are replaced with the factory default 
values.
Color ResetColor parameters are replaced with the factory default 
values.
 
 
 
 Information   
 

Menu Description
Information Shows a video source, display mode on the OSD screen. 
 

       Overview     |    Installation     |    OSD Mode    |    Color 
Calibration   |    Uninstall     |    Troubleshooting       
 
 Overview 
 
 
 
 What is MagicTune™? 
Monitor performance can vary due to the graphics card, host computer lighting conditions and other 
environmental factors.  In order to get the best image on a monitor requires you to adjust it for your unique 
setting.  Unfortunately, the manual controls available to tune the image often prove to be challenging.  Proper 
adjustment...