Samsung Syncmaster 783df Quick Start Guide

 
SyncMaster 591S/793S/591V/793V/783DF/793DF
 
/795DF/797DF/997DF/793MB/795MB
   
 
 

 
 
 
Main PageOn-Screen Display
Safety InstructionsTroubleshooting
NotationalCheck List
PowerQ & A
InstallationSelf-Test Feature Check
Clean
Other
IntroductionSpecifications
UnpackingGeneral Specifications
FrontPowerSaver
RearPreset Timing Modes
Bottom
SetupInformation
Connecting Your MonitorService
Installing the Monitor DriverTerms
AutomaticRegulatory
ManualNatural Color
Base InstallationAuthority
 

Notational
Power
Installation
Clean
Others
 
 
 
 
 
Failure to follow directions noted by this symbol could result in bodily harm or damage to 
equipment.
 
 
ProhibitedImportant to read and understand at all times
Do not disassembleDisconnect the plug from the outlet
Do not touchGrounding to prevent an electric shock
 

Notational
Power
Installation
Clean
Others
 
 
 
When not used for extended periods of time, set your computer to DPMS. If 
using a screen saver, set it to the active screen mode. 
 
zIf the size of your monitor is small, or if the same image is present for long 
periods of time, you may see afterimages due to damage to the 
fluorescent substance on the inside of the CDT. 
Do not use a damaged or loose plug.  
z This 
may cause an electric shock  or fire. 
Do not pull the plug out by the wire nor touch...

Notational
Power
Installation
Clean
Others
 
 
Do not cover the vents on the monitor cabinet. 
zBad ventilation may cause a breakdown or fire. 
Put your monitor in a location with low humidity and a minimum of 
dust. 
zAn electric shock or fire could result inside the monitor. 
Do not drop the monitor when moving it.  
zThis may cause damage to the product or human body.  
Place the monitor on a flat and stable surface. 
z The monitor may cause injury by
 falling. 
Set down the monitor carefully.  
zIt...

Notational
Power
Installation
Clean
Others
 
 
 
When cleaning the monitor case or the surface of the CDT, wipe with a 
slightly moistened, soft fabric. 
Do not clean Flat monitor with water. Use a water-diluted mild 
detergent.  
 
(Some detergents contain significant amounts of alcohol-based solvents, 
which can damage (color change) or crack the monitor case. The 
antiglare/anti-static surface coating on the CDT may also be affected.) 
Dilute the detergent (1:10 ratio) with water before using. 
Do...

Notational
Power
Installation
Clean
Others   
Do
 not re move cover(or back). 
z This  may cause an electric shock  or fire.  zRefer servicing to qualified service personnel. 
If your monitor does not operate normally - in particular, if there are 
any unusual sounds or smells coming from it - unplug it 
immediately and  contact an authorized dealer or service
. 
z This may cause an electric shock  or fire. 
Do not place any heavy objects on the monitor.  
z This 
may cause an electric shock  or fire....

Unpacking
Front 
Rear 
Bottom    
  Monitor and Stand  
 
(Some models include a stand attached. )  
Please make sure the following items are included  with your monitor. If any items are missing,  
contact your dealer .
 
  Power Cord
  Stand
  Quick Setup Guide
  Warranty Card   
      (Not available in all locations)
   Users Guide, Monitor Driver
     
For Multimedia model (Option) 
 
 
  Multimedia Speaker Stand  
 
  Sound Cables(2each)
  DC Power Cord 
  User Guide
 
SyncMaster 783DF
SyncMster...

Unpacking
Front 
Rear 
Bottom 
 
1. Menu button Opens the OSD menu. Also used to exit the OSD menu or return to the 
previous menu.
2. Adjust buttons These buttons allow you to highlight and adjust items in the menu.
3. Enter button Used to select the OSD menu.
4. Power button Use this button for turn the monitor on and off.
5. Power indicator This light glows green during normal operation, and blinks green once as 
the monitor saves your adjustments.
 
Note:  
See 
PowerSaver  described in the manual...

Unpacking
Front 
Rear 
Bottom 
 
 
 
 
 
General
 
(The configuration at the back of the monitor may vary from product to product.)  
1. Power portConnect the power cord for your monitor to the power port on the back of 
the monitor.
2. Signal Cable Connect the signal cable to the video port on your computer, video board, 
video card, or graphics card.
BNC Connectors (Option)
 
(The configuration at the back of the monitor may vary from product to product.)  
1. Power portConnect the power cord for your...