Samsung Syncmaster 740t Quick Start Guide

 
 Natural Color 
 
Natural Color   
One of the recent problems in using a computer is  that the color of the images printed out by a 
printer or other images scanned by a scanner or a digital camera are not the same as those 
shown on the monitor.  
The Natural Color S/W is the very  solution for this problem. It is a color administration system 
developed by Samsung Electronics in association with Korea Electronics & 
Telecommunications Resear ch Institute (ETRI). 
This system is available only fo r...

1.[ ]Use this button to open the  on-screen menu and exit from the menu screen or close screen 
adjustment menu. 
2. [ ]This button allows you to adjust items in the menu.
3.[ ]Press this button to activate 
a highlighted menu item.
4.[
AUTO ]Press to self-adjust to the incomin
g PC signal. The values of fine,coarse and position are 
adjusted automatically.
 AUTO 
SyncMaster 540B / 740T / 940T / 940Be
 

Menu Description
AUTOWhen the 
AUTO button is pressed, the Auto Adjustment screen appears 
as shown in the animated screen on the center. 
Auto adjustment allows the monitor to self-adjust to the incoming video 
signal. The values of fine, coarse and position are adjusted automatically.  
(Available in analog mode only) 
To make the automatic adjustment function sharper, execute the AUTO 
function while the AUTO PATTERN is on. 
- If auto adjustment does not work properly, press AUTO button again to...

Menu Description
LockedAfter pushing the MENU button more than 5 seconds, OSD function is 
locked (unlocked). 
You can also adjust the brightness and contrast of the 
monitor with the OSD adjustment locking feature.
 MagicBright™ 
Menu Description
MagicBright™Push the MagicBright button to circle through available preconfigured 
modes. 
- Six different modes (Custom/Text/Internet/Game/Sport/Movie) 
 Brightness 
 

Menu Description
BrightnessWhen OSD is not on the screen, push the button to adjust brightness.
 SOURCE 
Menu Description
SOURCESelects the video signal while the OSD is off. 
  Picture Brightness Contrast
 

  Color MagicColor Color Tone Color Control Gamma
  Image Coarse Fine Sharpness H-Position V-Position
  OSD Language H-Position V-Position Transparency Display Time
  Setup Auto Source Image Reset Color Reset
  Information
 Picture   
Menu Description Play/Stop
Brightness You can use the on-screen menus to change the 
brightness according to personal preference.  
Direct Access Feature 
: When OSD is not on the screen, 
push the button to adjust brightness. 
Contrast You can use the on-screen menus to...

Menu Description Play/Stop
MagicColorMagicColor is a new technology that Samsung has 
exclusively developed to improve digital image and to 
display natural color more clearly without disturbing image 
quality. 
1) Off - Returns to the original mode.
2) Demo - The screen before applying MagicColor 
appears on the right and the screen after applying 
MagicColor appears on the left.
3) Full - Displays not only vivid natural color but also 
more realistic natural skin color with clearness.
4) Intelligent -...

 : This function is to adjust
 the vertical size of the 
MagicZone.  
Color ToneThe tone of the color can be changed and one of four 
modes can be selected - Cool, Normal, Warm and 
Custom. 
(
Not available in MagicColor mode of Full and Intelligent. )
Color ControlAdjusts individual R,
G,B color balance. 
( Not available in MagicColor mode of Full and Intelligent. )
GammaGamma correction changes the luminance of the colors 
with intermediate luminance. zMode 1  
zMode 2  
zMode 3  
 
 
 
 
 Image...

V-Positiondisplay.
(Available in analog mode only)
 OSD   
Menu Description Play/Stop
LanguageYou can choose one of eight languages. 
Note:The language chosen affects only the language of 
the OSD. It has no effect on any software running on the 
computer.
H-PositionYou can change the horizontal position where the OSD 
menu appears on your monitor.
V-PositionYou can change the vertical position where the OSD menu 
appears on your monitor.
TransparencyChange the transparency of the background of the OSD....

Menu Description Play/Stop
Auto SourceSelect
Auto Source for the monitor to automatically select 
the signal source.
Image ResetImage parameters are replaced with the factory default 
values.
Color ResetColor parameters are replaced with the factory default 
values.
 Information   
Menu Description