Samsung Syncmaster 740n Quick Start Guide

   Monitor Assembly
Monitor and Bottom  
   Swivel stand 
   Pivot Stand / Sliding Stand
 

A.Stand Stopper
  Attaching a Base 
   This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad.
Simple stand Pivot stand 
Sliding Stand 
Lowest HAS Stand
A.  Monitor  
B.  Mounting interface pad (Sold separately) 
   1. Turn off your monitor  and unplug its power cord.  
2. Lay the LCD monitor face-down on a flat surf ace with a cushion beneath it to protect the 
screen.
3. Remove four screws and then  remove the stand from the  LCD monitor.  
4. Align the mounting interface pad with...

Connecting the Monitor 
1.Connect the power cord
 for your monitor to the power port on the back of the monitor. 
Plug the power cord  for the monitor into a nearby outlet.
2-1. Using the D-sub (Analo
g) connector on the video card. 
Connect the DVI-A to  D-SUB Cable to the RGB IN port  on the back of your monitor. 
[ RGB IN ]
2-2. Using the DVI (Digital) conn
ector on the video card. 
Connect the DVI Cable to the DVI  IN port on the back of your monitor. 
[ DVI IN ]
2-3. Connected to a Macintosh....

Using the Stand 
   Pivot Stand 
A.Stand Stopper
  Attaching a Base 
   This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad.
A. Monitor  
B.  Mounting interface pad (Sold separately) 
   1. Turn off your monitor  and unplug its power cord.  
2. Lay the LCD monitor face-down on a flat surf ace with a cushion beneath it to protect the 
screen.
3. Remove four screws and then  remove the stand from the  LCD monitor.  
4. Align the mounting interface pad with the holes in the rear cover...

Connecting the Monitor 
1.Connect the power cord
 for your monitor to the power port on the back of the monitor. 
Plug the power cord  for the monitor into a nearby outlet.
2-1. Using the D-sub (Analo
g) connector on the video card. 
Connect the signal cable to the 15-pin,  D-sub port on the back of your monitor. 
[ RGB IN ]
2-2. Connected to a Macintosh. 
Connect the monito
r to the Macintosh computer using the  D-sub connection cable.
2-3. In the case of an old model 
Macintosh, you need to connect the...

   Monitor Assembly
Monitor and Bottom  
   Pivot Stand 
A.Stand Stopper
  Attaching a Base 
   This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad.
 

Simple stand Pivot stand
A.  Monitor  
B.  Mounting interface pad (Sold separately) 
   1. Turn off your monitor  and unplug its power cord.  
2. Lay the LCD monitor face-down on a flat surf ace with a cushion beneath it to protect the 
screen.
3. Remove four screws and then  remove the stand from the  LCD monitor.  
4. Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it 
with four screws that came with the arm-typ e base, wall mount hanger or other base....

4. If you can see following message window, then click the Continue Anyway button. 
Then click  OK button. (Microsoft® Windows® XP Operating System) 
5. Monitor driver installation is completed.  
This monitor driver is under certifying  MS logo,and this installation dont 
damage your system.The certified driver will be posted on Samsung 
Monitor homepage  
http://www.samsung.com/ .
Installing the Monitor Driver (Manual) 
Windows XP | Windows 2000  |Windows Me  |Windows NT  | Linux
When prompted by  the...

     
3. Click  Display icon and choose the 
Settings tab then click 
Advanced...
     
4. Click the  Properties button on the 
Monitor tab and select 
Driver tab.  
     
5. Click  Update Driver..  and select 
Install from a list or..  then click 
Next button.  
     
6. Select  Dont search ,I will..  then click 
Next and then click 
Have disk.  
 

     
7. Click the  Browse button then ch
oose A:(D:\Driver) and choose your monitor model in the 
model list and click the  Next button.  
     
8. If you can see following  Message window, then click the 
Continue Anyway button. Then 
click  OK button. 
This monitor driver is under ce rtified MS logo,and this installation do esnt damage your 
system.The certified driver will be posted on Samsung Monitor homepage. 
http://www.samsung.com/ 
9. Click the  Close button then click 
OK button continually.