Samsung Syncmaster 740b Quick Start Guide

							     
10. Monitor driver installation is completed. 
  Microsoft® Windows® 2000 Operating System
When you can see Digital Signature Not  Found on your monitor, follow these steps.
1. Choose  OK button on the 
Insert disk window.  
2. Click the  Browse button on the 
File Needed window.  
3. Choose A:(D:\Driver) then click the  Open button and then click 
OK button. 
How to install
1. Click  Start , 
Setting  , 
Control Panel .
2. Double click the  Display Icon.  
3. Choose the  Settings tab and then click 
Advanced...  
4. Choose  Monitor.  
5. Click  Driver and then click on 
Update Driver.. then click on the Next button.  
6. Choose  Display a list of the known drivers for this device so that I can choose a 
specific driver  then click 
Next and then click 
Have disk.  
7. Click the  Browse button then choo
se A:(D:\Driver).  
8. Click the  Open button, then click 
OK button.  
9. Choose your monitor model and click the  Next button then click 
Next button.  
10. Click the  Finish button then the 
Close button.  
If you can see the  Digital Signature Not Found  window then click the 
Yesbutton. 
And click the  Finish button then the 
Close button.
Case1: If the Properties button is inactive, it means your monitor is properly configured. 
Please stop installation 
Case2: If the Properties button is active, click the Properties button then follow next steps 
continually.
  Microsoft® Windows® Millennium Operating System
1. Click  Start , 
Setting  , 
Control Panel .
2. Double click  Display icon.  
3. Select the  Settings tab and click 
Advanced Properties  button.  
4. Select the  Monitor tab.  
5. Click the  Change button in the 
Monitor Type area.  
6. Choose  Specify the location of the driver .  
7. Choose  Display a list of all the driver  in a specific location.. then click 
Next button.  
8. Click the  Have Disk button  
9. Specify A:\(D:\driver) then click  OK button.  
10. Select  Show all devices  and choose the monitor that
 corresponds to the one you 
connected to your  computer and click 
OK.
11. Continue choosing  Close button and 
OK button until you clo
se the Display Properties 
dialogue box.  
  Microsoft® Windows® NT Operating System
1. Click  Start,
Settings ,
Control Panel , and then double-click 
Display icon.  
2. In Display Registration Information window, click Settings Tab and then click  All Display 
Modes .
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) 
and then click  OK.
4. Click  Apply button if you see
 the screen working no rmally after clicking 
Test. If the screen is 
 
						

							not normal, change to a different mode (lower mode  of resolution, colors or frequency).  
If there is no Mode at 
All Display Modes, select the level of resolution and vertical 
frequency by referring to the  Preset Timing Modes in the user guide.
  Linux Operating System 
        To execute X-Window,  you need to make the X86Config file, which is a  type of system setting file. 
1. Press Enter at the first and the seco nd screen after executing the X86Config file.  
2. The third screen is for  setting your mouse.
3. Set a mouse for your computer.  
4. The next screen is for  selecting a keyboard.
5. Set a Keyboard for your computer.  
6. The next screen is for  setting your monitor.
7. First of all, set a  horizontal frequency  for your monitor. (You can enter the frequency 
directly.)  
8. Set a  vertical frequency  for your monitor. (You can enter the frequency directly.)  
9. Enter the  model name of your monitor . This information will not affect
 the actual execution 
of X-Window.  
10. You have  finished setting up your monitor.  
Execute  X-Window after setting ot
her requested hardware.  
Natural Color 
Natural Color
One of the recent problems in using a computer is that th e color of the images printed out by a 
printer or other images scanned by a scanner or  a digital camera are not the same as those 
shown on the monitor.  
The Natural Color S/W is the very solution for this problem. It is a color administration system 
developed by Samsung  Electronics in association  with Korea Electronics & 
Telecommunications Research Institute (ETRI). 
This is only available for Samsung monitors and ensures that the color of the images on the 
monitor are the same as the  printed or scanned images.  
For more information, refer to Help  (F1) in the software program.  
Installing the Natural Color Software
Insert the CD included with the Samsung monitor into the CD-ROM Drive. The initial Natural 
Color screen will appear. Click on Natural Color in the startup window to install the Natural 
Color software. 
To install the program manually, insert the CD included with the Samsung monitor into the CD-
 
						

							ROM Drive, click the Windows [Start] button, select [Run...].  
Enter D:\color\NCProsetup.exe and then press the  key.  
(If the drive where the CD is inserted is not D:\, enter the applicable drive.) 
Uninstalling the Natural Color Software Program
Select Setting/Control Panel  on the 
Start menu and then double-click 
Add/Delete a 
program .
Select Natural Color from  the list and then click the 
Add/Deletebutton.
 
						

							1.[ ]Opens the on-screen menu  and exits from the menu or closes the adjustment menu. 
2.[ ]This button allows you to adjust items in the menu.
3.[ ]Press this button 
to Activates a highlig hted menu item.
4.[
AUTO ]Press to Self-Adjusts the
 incoming PC signal automatically. Th e values of fine,coarse and 
position are adjusted automatically.
 AUTO 
SyncMaster 740B / 940B
 
						

							MenuDescription
AUTOWhen the 
AUTO button is pressed, the Au
to Adjustment screen appears 
as shown in the animated screen on the center. 
Auto adjustment allows the monitor to self-adj ust to the incoming video 
signal. The values of fine, coarse and position are adjusted automatically.  
(Available in analog mode only) 
To make the automatic adjustment function sharper, execute the AUTO 
function while the  AUTO PATTERN is on. 
- If auto adjustment does  not work properly, press AU TO button again to 
adjust picture with more accuracy. 
- If you change resolution in the control panel, auto function will be 
executed automatically. 
 Locked 
 
						

							MenuDescription
LockedAfter pushing the MENU 
button more than 5 seconds, OSD function is 
locked (unlocked). You can also adjust the brightness and contrast of the 
monitor with the OSD adjustment locking feature.
 MagicBright™ 
MenuDescription
MagicBright™ Push the MagicBright button to circle through available preconfigured 
modes. 
- Six different modes (Custom/Te
xt/Internet/Game/Sport/Movie) 
 
						

							 Brightness 
MenuDescription
BrightnessWhen OSD is not on the screen, push 
the button to adjust brightness.
 SOURCE 
MenuDescription
SOURCESelects the video signal while the OSD is off. 
 
						

							  Picture Brightness Contrast
  Color MagicColor Color Tone Color Control Gamma
  Image Coarse Fine Sharpness H-Position V-Position
  OSD Language H-Position V-Position Transparency Display Time
  Setup Auto Source Image Reset Color Reset
  Information
 Picture   
MenuDescriptionPlay/Stop
BrightnessYou can use the on-screen menus to change the 
brightness according to personal preference.  
Direct Access Feature 
: When OSD is not on the screen, 
push the button to adjust brightness. 
Contrast
You can use the on-screen menus to change the contrast 
according to personal preference. 
( Not available in MagicColor mode of Full and Intelligent. )
 Color   
 
						

							MenuDescriptionPlay/Stop
MagicColorMagicColor is a new technology that Samsung has 
exclusively developed to improve digital image and to 
display natural color more clearly with
out disturbing image 
quality. 
1) Off  - Returns to the original mode.
2) Demo  - The screen before
 applying MagicColor 
appears on the right and the screen after applying 
MagicColor appears on the left.
3) Full  - Displays not only vivid natural color but also 
more realistic natural skin color with clearness.
4) Intelligent  - Displays vivid natural color with clearness.
5) MagicZone  - The MagicZone ensures the clear and 
sharp display of animated multimedia or photo images by 
enhancing the brightness, sharpness, saturation, hue of a 
certain area on the screen. 
Especially, MagicZone is appropriate to using the moving 
picture. 
MagicZone 
 Hue  
: This function is to adjust the hue of the MagicZone.
 Saturation  
: This function is to adjust the saturation of the 
MagicZone.
 Brightness  
: This function is to  adjust the brightness of the 
MagicZone.
 Sharpness  
: This function is to adjust the sharpness of the 
MagicZone.
 H-Position  
: This function is to move the MagicZone horizontally.
 V-Position  
: This function is to move the MagicZone vertically.
 H-Size  
: This function is to adjust the horizontal size of the 
MagicZone.
 V-Size  
Hue 
Saturation
Brightness 
Sharpness 
H-Position 
V-Position
H-Size
V-Size
 
						

							: This function is to adjust the vertical size of the 
MagicZone.
Color Tone
The tone of the color can be changed and one of four 
modes can be selected - Cool, Normal, Warm and 
Custom. 
(Not available in MagicColor mode of Full and Intelligent. )
Color ControlAdjusts individual R,G,B color balance. 
(
Not available in MagicColor mode of Full and Intelligent. )
Gamma
Gamma correction changes the luminance of the colors 
with intermediate luminance. 
zMode 1  zMode 2  zMode 3  
 Image   
MenuDescriptionPlay/Stop
CoarseRemoves noise such as vertical stripes. Coarse 
adjustment may move the screen image area. You may 
relocate it to the center using the horizontal control menu. 
(Available in analog mode only)
Fine
Removes noise such as horizontal stripes. If the noise 
persists even after fine tuning
, repeat it after adjusting the 
frequency (clock speed). 
(Available in analog mode only)
Sharpness Changes the clearance of image. 
(
Not available in MagicColor mode of Full and Intelligent. )
H-Position
Changes the horizontal position of the monitors entire 
display.
(Available in analog mode only)
Changes the vertical position of the monitors entire