Samsung Syncmaster 720xt Quick Start Guide

 
  
  
  
  
  
  
  
  
  
  
  
  
  
 
 
 
Install drivers Install programs
  
    
 
 
     !!!!
SyncMaster 720XT/ 920XT
 

 Notation
 
 
 
 
 
Failure to follow directions noted by this symbol could result in bodily harm or damage to the 
equipment.
 
 
 
ProhibitedImportant to read and understand at all times
Do not disassembleDisconnect the plug from the outlet 
Do not touchGround to prevent an electric shock
 
 
 Power
When not used for extended period of time, set your computer to DPMS.  
If using a screen saver, set it to active screen mode. 
The images here are for reference only, and are not applicable in all cases...

 Do not use a damaged or loose plug.  
 
This may cause electric shock or fire.
 
 
Do not pull the plug out by the wire nor touch the plug with wet hands.  
 
This may cause electric shock or fire.
 
 
Use only a properly grounded plug and receptacle.  
 
An improper ground may cause electric shock or equipment damage. (Class l 
Equipment only.) 
 
 
Insert the power plug firmly so that it does not come loose.  
 
A bad connection may cause fire. 
 
 
Do not excessively bend the plug and wire nor place...

This may cause an electric shock or fire.
 
 
 Installation
  Be sure to contact an authorized Service Center when installing your set in a location  with heavy dust, high or low temperatures, high humidity, and chemical substances, 
or where it will be operated for 24 hours continuously such as an airport, train station 
or etc.  
 
Failure to do so may cause serious damage to your set.
 
 
Place your monitor in a location with low humidity and a minimum of dust.  
 
Failure to do so may cause electric...

 
 
Keep any heating devices away from the power cable.  
 
A melted coating may cause electric shock or fire.
 
 
Do not install the product in places with poor ventilation, for instance, a bookshelf, 
closet, etc.  
 
Any increase in the internal temperature may cause fire.
 
 
Put down the monitor carefully.  
 
Failing to do so may damage the monitor.
 
 
Do not place the monitor face down.  
 
This may damage the TFT-LCD surface. 
 
 
The installation of the bracket must be done by a qualified...

 Cleaning and Using 
  When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened, soft fabric. 
 
 
Do not spray water or detergent directly onto the monitor.  
 
This may cause damage, electric shock or fire. 
 
 
Use the recommended detergent with a smooth cloth. 
 
 
If the connector between the plug and the pin is dusty or dirty, clean it properly using 
a dry cloth.  
 
A dirty connector may cause electric shock or fire.
 
 
Make sure to unplug the power...

 
 
If your monitor does not operate normally - in particular, if there is any unusual sound 
or smell coming from the monitor - unplug it immediately and contact an authorized 
dealer or the Service Center.   
 
This may cause electric shock or fire.
 
 
Keep the product away from places exposed to oil, smoke or moisture; do not install 
inside a vehicle.  
 
This may cause a malfunction, electric shock or fire.  
Especially avoid operating the monitor near water or outdoors where the monitor 
could be...

This may cause a malfunction, electric shock or fire.  
If a foreign substance enters the monitor, unplug the power cord and contact the 
Service Center. 
 
 
Keep the product away from combustible chemical sprays or inflammable 
substances.  
 
This may cause an explosion or fire.   
 
Never insert anything metallic into the monitor openings.  
 
This may cause electric shock, fire or injury. 
 
 
Do not insert metal objects such as chopsticks, wire and tools or inflammable objects 
such as paper or...

 
 
 
 
 
 
Do not install the product on an unstable, uneven surface or a location prone to 
vibrations.  
 
Dropping the product may cause damage to the product or the person carrying it.  
Using the product in a location prone to vibrations may shorten the lifetime of the 
product or may cause the product to catch fire.  
 
When moving the monitor, turn off and unplug the power cord. Make sure that all 
cables, including the antenna cable and cables connected to other devices, are 
disconnected before...

 
zAdjust the monitor angle so that there is no reflected light on the 
screen.Try to maintain your arms perpendicular to your armpits.  
zKeep your arms level with the back of your hands.  zKeep the angle of the elbow perpendicular.  zKeep the angle of the knees at more than 90 degree. Do not let your 
feet fall up from the floor. Adjust the arm position so that it is below 
the heart.  
 
 
Correct Disposal of This Product  
(Waste Electrical & Electronic Equipment) - Europe only
(Applicable in the...