Samsung Syncmaster 713bm Quick Start Guide

 
 
  
 
2) Text
 : Normal Brightness 
  For documentations or works involving heavy text.
3) Internet  : Medium Brightness 
  For working with a mixture of images such as text and 
graphics.
4) Entertain  : High Brightness 
  For watching motion pictures such as a DVD or VCD.
>>Click here to see an animation clip  
Volume button[ ]When OSD is not on the screen, push the button to adjust 
volume.
Adjust buttons [ ]Adjust items in the menu.
Enter button [ ] /  
Source button Activates a highlighted menu...

 
 
  
  
  
    of your monitor.
Power on/off SwitchUse this button for turn the monitor on and off.
Kensington LockThe Kensington lock is a device used to physically fix the system 
when using it in a public place. (The locking device has to be 
purchased separately. )
 
Headphone connection 
terminalConnect your headphone to the Headphone-out port. 
AUDIO INConnect the audio cable for your monitor to the audio port on the 
back of your computer. 
See Connecting the Monitor for further information...

 
1.Connect the power cord for your monitor to the power port on the back of the monitor. 
Plug the power cord for the monitor into a nearby outlet.
2-1. Using the D-sub (Analog) connector on the video card.  
Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 
 
2-2.Using the DVI (Digital) connector on the video card. 
Connect the DVI Cable to the DVI Port on the back of your Monitor. 
 
2-3.Connected to a Macintosh. 
Connect the monitor to the Macintosh computer using...

   Pivot Stand 
 
   Attaching a base 
    This monitor accepts a  100 mm x 100 mm VESA-compliant  mounting interface pad.
 
A. Monitor  
 
B. Mounting interface pad  
 
   1. Turn off your monitor and unplug its power cord.  
2. Lay the LCD monitor face-down on a flat surf ace with a cushion beneath it to protect the 
screen.  
3. Remove four screws and then remove the Stand from the LCD monitor.  
4. Align the Mounting Interface Pad with the holes in the Rear Cover Mounting Pad and secure  it with four...

 
1.Connect the power cord for your monitor to the power port on the back of the monitor. 
Plug the power cord for the monitor into a nearby outlet.
2-1. Using the D-sub (Analog) connector on the video card.  
Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 
 
2-2.Using the DVI (Digital) connector on the video card. 
Connect the DVI Cable to the DVI Port on the back of your Monitor. 
 
2-3.Connected to a Macintosh. 
Connect the monitor to the Macintosh computer using...

   Monitor Assembly 
Monitor and Bottom  
 
 
   Pivot Stand 
 
 
 

 
   Attaching a base 
    This monitor accepts a  100 mm x 100 mm VESA-compliant  mounting interface pad.
 
Simple stand Pivot stand
A. Monitor  
 
B. Mounting interface pad  
 
   1. Turn off your monitor and unplug its power cord.  
2. Lay the LCD monitor face-down on a flat surf ace with a cushion beneath it to protect the 
screen.  
3. Remove four screws and then remove the Stand from the LCD monitor.  
4. Align the Mounting Interface Pad with the holes in the Rear Cover Mounting Pad and secure  it...

 
1.Connect the power cord for your monitor to the power port on the back of the monitor. 
Plug the power cord for the monitor into a nearby outlet.
2-1. Using the D-sub (Analog) connector on the video card.  
Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 
 
2-2.Using the DVI (Digital) connector on the video card. 
Connect the DVI Cable to the DVI Port on the back of your Monitor. 
 
2-3.Connected to a Macintosh. 
Connect the monitor to the Macintosh computer using...

   Pivot Stand 
 
 
 
 
    Attaching a base 
    This monitor accepts a  100 mm x 100 mm VESA-compliant  mounting interface pad.
 
 

 
 
Monitor 
Mounting interface pad 
   1. Turn off your monitor and unplug its power cord.  
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the 
screen.  
3. Remove four screws and then remove the Stand from the LCD monitor.  
4. Align the Mounting Interface Pad with the holes in the Rear Cover Mounting Pad and secure 
it with four screws that came with the arm-type base, wall mount hanger or other base. 
 
 
When prompted by the operating system for the monitor...