Samsung Syncmaster 710v Quick Start Guide

							 
 
 
Please make sure the following items are included with your monitor. If any items are missing,  contact your dealer. 
 
 
 
 
 Unpacking 
    Monitor 
 
  Monitor Bottom Hanger 
 
 
   Manual  
 
  Quick Setup Guide Warranty Card Users Guide, Monitor 
Dirver, Natural Color 
software, MagicTune™  software CD 
 
 
SyncMaster 510M/710M/910M
 
						

							  
D-Sub Cable  Power Cord  Audio Cable 
 
 
 
 Front  
 
 
  1. Menu button [ ] 
Use this button for open the on-s
creen menu and exits from the menu 
screen or closes screen adjustment menu. 
2. MagicBright™  button [ ] 
MagicBright™ is a new feature prov iding optimum viewing environment 
depending on the contents of the image you are watching. 
Currently four different modes are av ailable: Custom, Text, Internet, and 
Entertain. 
Each mode has its own pre-configured brightness value. You can easily 
select one of four settings by si mply pressing MagicBright control 
buttons. 
1) Text  : Normal Brightness 
  For documentations or  works involving heavy text.
2) Internet  : Medium Brightness 
  For working with a mixture of im ages such as text and graphics.
3) Entertain  : High Brightness 
  For watching motion pictures such as a DVD or VCD.
4) Custom  
  Although the values  are carefully chosen by  our engineers, the pre-
configured values may not be comfor table to your eyes depending on 
your taste.  
  
  Cable
 
						

							 
 
  
  If this is the case, adjust the Brightness and Contrast by using the 
OSD menu. 
3. Power button [ ] /  Power indicator
Use this button for turn the monitor on and off./ 
This light glows green during normal  operation, and blinks green once as 
the monitor saves your adjustments.
4. Volume button [ ]
When OSD is not on the screen, pu sh the button to adjust volume.
2,4. Adjust buttons [ ]
Use this button for navigate and select menus or adjust the menu items 
in the menu screen.
5. Enter button [ ]/   Auto button 
Activate a highlighted menu item. /  
Use this button for auto  adjustment direct access.
See PowerSaver  described in the manual for further information regarding power saving functions. 
For energy conservation, turn your monitor OFF  when it is not needed, or when leaving it 
unattended for long periods.
 
 
 
 
 
 
Rear  
(The configuration at the back of the mo nitor may vary from product to product.)   
  
  1. Power port
Connect the power cord for your monitor to the power port on the back of 
the monitor.
2. D-sub 15-pin port Connect the signal cable to the 15-pin,  D-sub connector on the back of your 
monitor. 
 
						

							 
 
  
  
  
  
1. Headphone connection terminal [ ]   
2. PC sound connection terminal  
Connect the audio cable for your monitor to  the audio port on the back of your 
computer.  
See  Connecting Your Monitor  for further information regarding cable connections.
 
						

							 
1.Connect the power cord for your monitor to the power port on the back of the monitor. 
Plug the power cord for the monitor into a nearby outlet.
2-1. Using the D-sub (Analog) conne ctor on the video card.  
Connect the signal cable to the 15-pin, D-su b connector on the back of your monitor. 
 
2-2. Connected to a Macintosh. 
Connect the monitor to the Macintosh co mputer using the D-SUB connection cable.
2-3. In the case of an old model Macintosh, you need  to connect the monitor using a special Mac adaptor.
3. Turn on your computer and monitor. If your moni tor displays an image, installation is complete.
 
 
 
						

							 
   Monitor Assembly 
 1. Monitor and Bottom  
2. Monitor and Hanger    
 
   Attaching a base 
 
   This monitor accepts a 100 mm x 100 mm  VESA-compliant mounting interface pad.
       A. Monitor 
        B. Mounting interface pad  
 
1 . Turn off your monitor and unplug its power cord.
2 . Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 
3 . Remove the four screws and then remove the Stand from the LCD monitor.
4 .
Align the Mounting Interface Pad with the holes in the  Rear Cover Mounting Pad and secure it with the 
four screws that came with the arm-type base, wall mount hanger or other base.
 
 
 
						

							 
When prompted by the operating system for the monitor driver, insert the CD-ROM 
included with this monitor. Driver installation is slightly different from one operating 
system to another. Follow the directions as appropriate for the operating system you 
have.  
 
Prepare a blank disk and download the driver prog ram file at the Internet web site shown here. 
 
zInternet web 
site :   http://www.samsung-monitor.com/
 (Worldwide)
http://www.samsungusa.com/monitor (USA)
http://www.sec.co.kr/monitor  (Korea)
http://www.samsungmonitor.com.cn/  (China)
 
    Windows ME 
 
 
1. Insert CD into the CD-ROM drive.  
2. Click  Windows ME Driver .  
3. Choose your monitor model in the model list, then click the  OK button. 
 
 
 
4. Click the  Install button in the  Warning window. 
 
 
 
5. Monitor driver installation is completed.  
 
 
    Windows XP/2000 
 
 
1. Insert CD into the CD-ROM drive.  
2. Click  Windows XP/2000 Driver   
3. Choose your monitor model in the model list, then click the  OK button. 
 
 
						

							 
 
4. If you can see following  Message window, then click the  Continue Anyway button. 
Then click  OK button. 
 
 
 
5. Monitor driver installation is completed.  
 
This monitor driver is under certifying MS  logo,and this installation dont damage 
your system.The certified driver will be posted on Samsung Monitor Homepage  
http://www.samsung-monitor.com/ . 
 
 
Windows XP  | Windows 2000  | Windows Me  | Windows NT  | Linux   
 
 
When prompted by the operating system for the monitor driver, insert the CD-ROM 
included with this monitor. Driver installation is slightly different from one operating 
system to another. Follow the directions  as appropriate for the operating system you 
have.  
 
Prepare a blank disk and download the driver prog ram file at the Internet web site shown here. 
 
zInternet web 
site :   http://www.samsung-monitor.com/
 (Worldwide)
http://www.samsungusa.com/monitor  (USA)
http://www.sec.co.kr/monitor  (Korea)
http://www.samsungmonitor.com.cn/  (China)
 
  Microsoft® Windows® XP Operating System  
 
1. Insert CD into the CD-ROM driver.  
2. Click  Start —>  Control Panel  then click the  Appearance and Themes  Icon.  
 
 
						

							     
 
3. Click  Display icon and choose the  Settings tab then click  Advanced... 
 
     
 
4. Click the  Properties button on the  Monitor tab and select  Driver tab.  
 
     
 
5. Click  Update Driver..  and select Install from a list or..  then click Next button.  
 
     
 
6. Select  Dont search ,I will..  then click Next and then click  Have disk.  
 
 
						

							     
 
7. Click the  Browse button then choose A:(D: Driver) and choose your monitor model in the model  \
list and click the  Next button.  
 
     
 
8. If you can see following  Message window, then click the  Continue Anyway button. Then click 
 OK  button. 
 
  
 
This monitor driver is under certifying MS logo,an d this installation dont damage your system.The 
certified driver will be posted on Samsung Monitor Homepage  
http://www.samsung-monitor.com/ 
 
9. Click the  Close button then click  OK button continually.