Samsung Syncmaster 710v Quick Start Guide

     
 
10. Monitor driver installation is completed.  
 
 
 
    Microsoft® Windows® 2000 Operating System
 
 
When you can see Digital Signature Not Found on your monitor, follow these steps.
1. Choose  OK button on the  Insert disk window.  
2. Click the  Browse button on the  File Needed window.  
3. Choose A:(D: Driver) then click th e Open button and then click 
\ OK button.  
How to install
1. Click  Start , Setting  , Control Panel .  
2. Double click the  Display Icon.  
3. Choose the  Settings...

1. Click Start, Settings , Control Panel , and then double-click  Display icon.  
2. In Display Registration Information window, click Settings Tab and then click  All Display Modes.  
3. Select a mode that you wish to use (Resolution,  Number of colors and Vertical frequency) and then 
click  OK.  
4. Click  Apply button if you see the screen working normally after clicking Test. If the screen is not 
normal, change to a different  mode (lower mode of resolution, colors or frequency).  
If there is no...

 
 
1.Opens the OSD menu. Also used to exit the OSD menu or return to the previous menu.
2. These buttons allow you to  adjust items in the menu.
3. These buttons allow you to  adjust items in the menu.
4.  Activate a highlighted menu item.
 
SyncMaster 710V/910V/712V
 

MenuDescription
AUTOWhen the 
AUTO button is pressed, the Auto Adjustment screen appears as 
shown in the animated screen on the center. 
Auto adjustment allows the monitor to se lf-adjust to the incoming video signal. 
The values of fine, coarse and position are adjusted automatically.  
 
To make the automatic adjustment function sharper, execute the AUTO function 
while the  AUTO PATTERN  is on.
 
 
 MagicBright™ 
 
MenuDescription
MagicBright™ Then push the MagicBright™ button 
again to circle...

 Brightness 
MenuDescription
BrightnessAdjust Brightness. 
 
 

MenuDescriptionPlay/Stop
BrightnessAdjust the Brightness.  
Direct Access Feature 
: When OSD is not on the screen, Push 
the button to adjust brightness. 
ContrastAdjust the Contrast. 
 
 
 Color 
MenuDescriptionPlay/Stop
Color Tone The tone of the color can be changed and one of four modes 
can be selected - Cool, normal, Warm and Custom.
Color ControlFollow these steps to adjust 
individual R,G,B color control.
GammaSelect one of three pre-defined gammas.
 
 
 Picture 
 

MenuDescriptionPlay/Stop
CoarseImage is used to fine tune and get the best image by removing 
noises that creates unstable images with jitters and shimmers. 
If satisfactory results are not obtained using the Fine 
adjustment, use the Coarse adjustment and then use Fine 
again.
Fine
Image is used to fine tune and get the best image by removing 
noises that creates unstable images with jitters and shimmers. 
If satisfactory results are not obtained using the Fine 
adjustment, use the Coarse adjustment and...

MenuDescriptionPlay/Stop
LanguageFollow these steps to change th
e language used in the menu. 
You can choose one of seven languages. (English, German, 
Spanish, French, Italian, Swedish, Russian) 
Note :The language chosen affects only the language of the 
OSD. It has no effect on any software running on the computer.
H-PositionYou can change the horizontal position where the OSD menu 
appears on your monitor.
V-Positon You can change the vertical position where the OSD menu 
appears on your monitor....

MenuDescriptionPlay/Stop
Image ResetImage parameters are replaced with the factory default values.
Color ResetColor parameters are replaced wi th the factory default values.
 
 
 Information 
MenuDescription
InformationShows a video source, display mode on the OSD screen. 
 Setup 
 

 
 
1.Opens the OSD menu. Also used to exit the OSD menu or return to the previous menu.
2. These buttons allow you to  adjust items in the menu.
3. These buttons allow you to  adjust items in the menu.
4.  Activate a highlighted menu item.
 MagicTune™2.5 manual
 
SyncMaster 510M/710M/910M