Samsung Syncmaster 540b Quick Start Guide

Install drivers   Install programs  
   
     
SyncMaster 740B / 940B / 740N / 940Fn / 540B / 540N / 740T / 940T / 940N\
 / 940Be
 

Notational 
Failure to follow directions noted by this symbol could resu lt in bodily harm or damage to 
the equipment.  
Prohibited Important to read and understand at all times 
Do not disassemble Disconnect the plug  from the outlet 
Do not touch Grounding to prevent  an electric shock 
Power 
When not used for an extended period of  time, set your computer to DPMS.  
If using a screen saver, set it  to active screen mode.  
The images here are for reference only, and are not applicable in all cases...

Do not use a damaged or loose plug. 
zThis may cause electric shock or fire.
Do not pull the plug out by the wire nor touch the plug with wet hands. 
zThis may cause electric shock or fire.
Use only a properly grounded plug and receptacle. 
zAn improper ground may cause electric shock or equipment damage.  
Insert the power plug firmly so that it does not come loose. 
zA bad connection may cause fire.  
Do not excessively bend the plug and wire nor place heavy objects upon 
them, which could cause...

Installation  
Be sure to contact an authorized Service Center, when installing your monitor in 
a location with heavy dust, high or low temperatures, high humidity, and exposed 
to chemical substances and where it operates for 24 hours such as at airports, 
train stations etc. 
Failure to do so may cause serious damage to your monitor. 
Place your monitor in a location with low humidity and a minimum of 
dust. 
zFailure to do so may cause electric shock or fire inside the monitor.  
Do not drop the...

Put down the monitor carefully. 
zFailing to do so may damage the monitor.  
Do not place the monitor face down. 
zThis may damage the TFT-LCD surface.  
The installation of the bracket must be done by a qualified professional. 
zInstalling the bracket by unqualified personnel may result in injury.  
zAlways use the mounting device specified in the owners manual.  
When installing the product, make sure to keep it away from the wall 
(more than 10 cm / 4 inchs) for ventilation purposes.
zPoor ventilation...

Use the recommended detergent with a smooth cloth. 
If the connector between the plug and the pin is dusty or dirty, clean it 
properly using a dry cloth. 
zA dirty connector may cause electric shock or fire.  
Make sure to unplug the power cord before cleaning the product. 
zOtherwise, this may cause electric shock or fire.  
Unplug the power cord from the power outlet and wipe the product using 
a soft, dry cloth. 
zDo not use any chemicals such as  wax, benzene, alcohol, thinners, 
insecticide, air...

If the monitor is dropped or the casing is damaged, turn the monitor off 
and unplug the power cord. Then contact a Service Center.
zThe monitor may malfunction, caus ing electric shock or fire.  
Disconnect the plug from the outlet during storms or lightning or if it is 
not used for a long period of time. 
zFailure to do so may cause electric shock or fire.  
Do not try to move the monitor by pu lling only the wire or the signal 
cable.
zThis may cause a breakdown, electric  shock or fire due to damage...

Do not insert metal objects such as chopsticks, wire and tools or 
inflammable objects such as paper or matches into the vent, headphone 
port or AV ports. 
zThis may cause electric shock or fire. If an alien substances or water 
enters the product, turn the produc t off, unplug the power connector 
from the wall outlet and contact a Service Center.  
When viewing a fixed screen for an extended period of time, residual 
image or blurriness may appear. 
zChange the mode to energy saving  mode or set a...

zOtherwise, this may cause heat emission from the accumulated dirt or 
degraded insulation, causing electric shock or fire.  
Do not place your childrens favorite toys or any other objects of interest 
on the product. 
zChildren may try to climb on the product to retrieve an object. The 
product could fall, causing physical damage or even death.  
When lifting up or moving the monitor, do not lift the monitor upside 
down while holding only the stand. 
zThis may cause your monitor to fa ll, and become...

Please make sure the following items are included with your monitor. 
If any items are missing,  contact your dealer.
Contact a local deale
rto buy optional items.
Unpacking
 Type 1 
Monitor & Simple stand  Bottom
MagicRotation program can  not be provided as Simple 
Stand does not suppor t Pivot function. 
 Type 2 
Monitor & Pivot stand
 Type 3 
SyncMaster 740B / 940B