Samsung Syncmaster 2433lw User Manual

							Specifications 
General 
General 
Model Name  SyncMaster 633NW 
LCD Panel 
Size  15.6 inch (39 cm) 
Display area 344.232 mm(H) x 193.536 mm(V)
Pixel Pitch  0.252 mm(H) x 0.252 mm(V) 
Synchronization 
Horizontal  30 ~ 61 kHz 
Vertical  56 ~ 75 Hz 
Display Color 
16.7 M  
Resolution 
Optimum resolution  1360 x 768@60 Hz 
Maximum resolution  1360 x 768@60 Hz 
Input Signal, Terminated 
RGB Analog,  
0.7 Vp-p ± 5 % 
Separate H/V sync, Composite, SOG 
TTL level (V high ≥ 2.0 V, V low ≤ 0.8 V) 
Maximum Pixel Clock 
90 MHz (Analog) 
Power Supply 
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz 
Signal Cable 
15pin - to - 15pin D-sub cable, Detachable, 1500 +/- 20 mm  
Dimensions (W x H x D) / Weight (Simple Stand) 
386 x 264.5 x 67.2 mm (15.2 x 10.4 x 2.6 inch) (Without Stand) 
386 x 315.8 x 186.6 mm (15.2 x 12.4 x 7.3 inch) (With Stand)/ 2.55 kg (5.62 lbs) 
VESA Mounting Interface 
75 mm x 75 mm (For use with Specialty(Arm) Mounting hardware.) 
Environmental considerations 
Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C) 
Humidity : 20 % ~ 80 %, non-condensing 
Storage Temperature : -4°F ~ 140°F (-20°C ~ 60°C) 
Humidity : 10 % ~ 80 %, non-condensing 
Plug and Play Capability 
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the 
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor 
installation will proceed automatically, unless the user wishes to select alternate settings. 
 
						

							 Note 
Design and specifications are subject to change without prior notice. 
 Class B Equipment (Information Communication equipment for residential use) 
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas 
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.) 
Dot Acceptable 
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) 
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright 
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems. 
 
						

							Specifications 
PowerSaver 
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor 
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal 
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or 
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in 
your computer. Use the software utility installed on your computer to set up this feature. 
State  Normal Operation  Power saving mode Power off (Power button) 
EPA/ENERGY 2000 
Power Indicator On
Blinking Off
Power Consumption 18 watts
Less than 1 watts  Less than 1 watts 
 
This monitor is EPA ENERGY STAR® compliant and ENERGY 2000 compliant when used with 
a computer equipped with VESA DPM functionality. 
As an ENERGY STAR
® Partner, SAMSUNG has determined that this product meets the 
ENERGY STAR® guidelines for energy efficiency. 
 
						

							Specifications 
Preset Timing Modes 
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted 
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual 
and adjusts the screen as follows. 
Display Mode Horizontal 
Frequency 
(kHz) Vertical 
Frequency (Hz) Pixel Clock 
(MHz) Sync Polarity 
(H/V) 
IBM, 640 x 350  31.469  70.086  25.175  +/- 
IBM, 640 x 480  31.469  59.940  25.175  -/- 
IBM, 720 x 400  31.469  70.087  28.322  -/+ 
MAC, 640 x 480  35.000  66.667  30.240  -/- 
MAC, 832 x 624  49.726  74.551  57.284  -/- 
VESA, 640 x 480  37.861  72.809  31.500  -/- 
VESA, 640 x 480  37.500  75.000  31.500  -/- 
VESA, 800 x 600  35.156  56.250  36.000  +/+ 
VESA, 800 x 600  37.879  60.317  40.000  +/+ 
VESA, 800 x 600  48.077  72.188  50.000  +/+ 
VESA, 800 x 600  46.875  75.000  49.500  +/+ 
VESA, 1024 x 768  48.363  60.004  65.000  -/- 
VESA, 1024 x 768  56.476  70.069  75.000  -/- 
VESA, 1024 x 768  60.023  75.029  78.750  +/+ 
VESA, 1360 X 768 47.712
60.015 85.500  +/+ 
 
Horizontal Frequency 
The time to scan one line connecting the right edge to the left edge of the 
screen horizontally is called the Horizontal Cycle and the inverse number of 
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz 
Vertical Frequency 
Like a fluorescent lamp, the screen has to repeat the same image many times 
per second to display an image to the user. The frequency of this repetition is 
called the Vertical Frequency or Refresh Rate. Unit: Hz 
 
						

							Specifications 
General 
General 
Model Name  SyncMaster 733A 
LCD Panel 
Size  17 inch (43 cm) 
Display area 337.920 mm (H) x 270.336 mm (V)
Pixel Pitch  0.264 mm (H) x 0.264 mm (V) 
Synchronization 
Horizontal  30 ~ 81 kHz 
Vertical  56 ~ 75 Hz 
Display Color 
16.7M  
Resolution 
Optimum resolution  1280 x 1024@60 Hz 
Maximum resolution  1280 x 1024@75 Hz 
Input Signal, Terminated 
RGB Analog 
0.7 Vp-p ± 5 % 
Separate H/V sync, Composite, SOG 
TTL level (V high ≥ 2.0 V, V low ≤ 0.8 V) 
Maximum Pixel Clock 
135 MHz (Analog) 
Power Supply 
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz 
Signal Cable 
15pin - to - 15pin D-sub cable, Detachable  
Dimensions (W x H x D) / Weight (Simple Stand) 
380.6 x 349 x 72.3 mm / 15.0 x 13.7 x 2.8 inch (Without Stand) 
380.6 x 397.1 x 200 mm / 15.0 x 15.6 x 7.9 inch (With Stand), 3.8 kg / 8.4 lbs 
VESA Mounting Interface 
75 mm x 75 mm (For use with Specialty(Arm) Mounting hardware.) 
Environmental considerations 
Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C) 
Humidity : 10 % ~ 80 %, non-condensing 
Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C) 
Humidity : 5 % ~ 95 %, non-condensing 
Plug and Play Capability 
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the 
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor 
installation will proceed automatically, unless the user wishes to select alternate settings. 
 
						

							 Note 
Design and specifications are subject to change without prior notice. 
 Class B Equipment (Information Communication equipment for residential use) 
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas 
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.) 
Dot Acceptable 
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) 
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright 
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.