Samsung Syncmaster 2433bw User Manual

Off Timer
The monitors will turn off automatically at the specified time.
• Off •On
MENU →   ,   →   →   ,   →  →   ,   →   →  ,   → MENU
Auto Source Select 
Auto Source for the monitor to automatically select the signal source.
• Auto •Manual
MENU →   ,   →   →   ,   →  →   ,   →MENU
Image Size You can change the size of the screen displayed on your monitor. Adjusting the Monitor
40 

•
Auto •Wide
• Auto - The screen is displayed in accordance with the screen aspect ratio of the input signals.
• Wide - A full screen is displayed regardless of the screen aspect ratio of the input signals.  Note
• Signals not available in the standard mode table are not supported.
• If the wide screen  which 
is the optimal resolution for the monitor is set on your PC, this function
is not performed.
MENU →   ,   →   →   ,   →  →  ,   → MENU
 Information
Shows a video source, display mode on the OSD...

Troubleshooting
Self-Test Feature Check
 Note
Your monitor provides a self test  feature 
that allows you to check whether your monitor is functioning
properly.
Self-Test Feature Check 1. Turn off both your computer and the monitor.
2. Unplug the video cable from the back of the computer.
3. Turn on the monitor.If the monitor is functioning properly, you will see a box in the illustration below. This box appears during normal operation if the video cable becomes disconnected or damaged.
4. Turn off your...

noisy, and video mode not supported, etc. In this case, first check the source of the problem, and then
contact the Service Center or your dealer.
Judging the monitor's working condition
If 
there is no image on 
the 
screen or a "Not Optimum Mode ", "Recommended Mode  1920 x 1200
60 Hz" message comes up, disconnect the cable from the computer while the monitor is still powered
on.
If there is a message coming up on the screen or if the screen goes white, this means the monitor is in...

A: If the display exceeds SXGA or 75 Hz, a "
Not Optimum Mode", "Recommended Mode  1920
x 1200 60  Hz" 
message is displayed. If the display exceeds 85 Hz, the display will work properly
but the " Not Optimum Mode ", "Recommended Mode  1920 x 1200 60 Hz" message appears
for one minute and then disappears.
Please change to the recommended mode during this one-minute period.
(The message is displayed again if the system is rebooted.)
Q: There  is  no  image  on  the  screen....

Q: The screen can be unbalanced due to the cycle of the video card signals. Readjust Position by
referring to the OSD.
The screen is out of focus or OSD cannot be adjusted. Q: Have you adjusted the resolution or frequency on the monitor?
A: Adjust the resolution and frequency of the video card.(Refer to the Preset Timing Modes).
LED is blinking but no images on the screen. Q: Is the frequency properly adjusted when checking the Display Timing on the menu?
A:Adjust 
the  frequency  properly  by  referring...

http://www.samsung.com/monitor/magictune
MagicTune™ doesn't work properly. Q: Have you changed your PC or video graphic card?
A: Download the latest program.  The 
program can be downloaded http://www.samsung.com/mon-
itor/magictune
Q: Did you install the program?
A: Reboot the computer after installing the program for the first time. If a copy of the program is already installed, remove it, reboot the computer, and then install the program again. You need
to reboot the computer for it to operate...

* Contact the video card manufacturer for details.
Q: How can I set the Power Saving function?
A: Windows XP:
Set the resolution in  the 
Control Panel → Appearance and Themes  → Display → Screen Saver.
Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Man-
ual).
A: Windows ME/2000:
Set the resolution at the Control Panel  → Display → Screen Saver.
Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Man-
ual).
Q: How can I clean the...

Specifications
General
General
Model Name SyncMaster 2433BW
LCD Panel
Size
24 inch (61 cm)
Display area 518.4 mm (H) x 324.0 mm (V)
Pixel Pitch
0.270 mm (H) x 0.270 mm (V)
Synchronization
Horizontal 30 ~ 75 kHz
Vertical
56 ~ 61 Hz
Display Color 16.7M
Resolution
Optimum resolution
1920 x 1200@60 Hz
Maximum resolution 1920 x 1200@60 Hz
Input Signal, Terminated
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB
0.7 Vp-p ± 5 %
Separate H/V sync, Composite, SOG
TTL level (V high 
≥ 2.0 V, V low ≤...

Environmental considerations
Operating
Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity : 10 % ~ 80 %, non-condensing
Storage
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
Plug and Play Capability This monitor can be installed on any Plug & Play compatible system. The interaction of the
monitor and the computer systems will 
provide 
the best operating conditions and monitor
settings. In most cases, the monitor installation will proceed automatically, unless the user...