Samsung Syncmaster 225bw Quick Start Guide

D-sub Cable  Power Cord  DVI Cable (option)
 
 
 
 Front 
 
 
 
MENU button [ ] 
 Opens the OSD menu. Also use to exit the OSD menu or return to 
the previous menu.  
MagicBright™  
[] 
 
 
 
 MagicBright™ is a new feature providing optimum viewing 
environment depending on the contents of the image you are 
watching. Currently six different modes are available: Custom, 
Text, Internet, Game, Sport and Movie. Each mode has its own 
pre-configured brightness value. You can easily select one of six...

 
 
   []
brightness.
Adjust buttons [ ]Adjust items in the menu.
Enter button [ ] /  
Source button Activates a highlighted menu item. /  
Push the  , then selects the video signal while the OSD is off. 
(When the source button is pressed to change the input mode, a 
message appears in the upper left of the screen displaying the 
current mode -- analog or digital input signal.) 
Note : If you select the digital mode, you must connect your monitor 
to the graphic cards DVI port using the DVI cable. 
AUTO...

    
 
 
 Connecting the Monitor 
1. Connect the power cord for your monitor to the power port on the back of the monitor. 
Plug the power cord for the monitor into a nearby outlet.
2-1. Using the D-sub (Analog) connector on the video card. 
Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. 
 
[ RGB IN ]  
2-2. Using the DVI (Digital) connector on the video card. 
Connect the DVI Cable to the DVI Port on the back of your Monitor. 
 
[ DVI IN ]  
2-3. Connected to a...

 
 Using the Stand 
 
   Sliding Stand
 Stand Stopper
 
 
 
   Swivel stand 
          
Using ( ),You can swivel the monitor left and right at an angle of 330 ° to set the monitor 
lengthwise. The rubber under the stand is to avoid the monitor slide. 
 
 
   Tilt an
gle 
 

  
Using ( ), You can adjust the tilt angle forward and backward for the most comfortable viewing 
angle. 
 
 
   Removing the base 
1. Turn off your monitor and unplug its power cord.  
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the 
screen.  
3. Remove two screws ( ) and then remove the Stand from the LCD monitor.  
 
   Attaching a Base 
    This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad.
 

 
A. Monitor  
 
B. Mounting interface pad (Sold separately) 
 
   1. Turn off your monitor and unplug its power cord.  
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the 
screen.  
3. Remove two screws and then remove the stand from the LCD monitor.  
4. Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it 
with four screws that came with the arm-type base, wall mount hanger or other base. 
To mount the monitor on a wall,...

 
 
4. If you can see following message window, then click the 
Continue Anyway button. 
Then click the 
OK button. (Microsoft
® Windows® XP/2000 Operating System) 
 
 
 
5. Monitor driver installation is completed.  
 
This monitor driver is under certifying MS logo,and this installation dosent 
damage your system.The certified driver will be posted on Samsung 
Monitor homepage  
http://www.samsung.com/. 
 
 
 
 Installing the Monitor Driver (Manual) 
Windows XP| Windows 2000|Windows Me|Windows NT |...

     
 
3. Click 
Display icon and choose the 
Settings tab then click 
Advanced. 
 
     
 
4. Click the 
Properties button on the 
Monitor tab and select 
Driver tab.  
 
     
 
5. Click 
Update Driver. and select 
Install from a list or. then click 
Next button.  
 
     
 
6. Select 
Dont search ,I will then click 
Next and then click 
Have disk.  
 
 

     
 
7. Click the 
Browse button then choose A:(D:\Driver) and choose your monitor model in the 
model list and click the 
Next button.  
 
     
 
8. If you can see following 
Message window, then click the 
Continue Anyway button. Then 
click 
OK button. 
 
  
 
This monitor driver is under certified MS logo,and this installation doesnt damage your 
system.The certified driver will be posted on Samsung Monitor homepage. 
http://www.samsung.com/ 
 
9. Click the 
Close button then click 
OK button...

     
 
10. Monitor driver installation is completed.  
 
 
 
   Microsoft® Windows® 2000 Operating System 
 
When you can see Digital Signature Not Found on your monitor, follow these steps.
1. Choose the 
OK button on the 
Insert disk window.  
2. Click the 
Browse button on the 
File Needed window.  
3. Choose A:(D:\Driver) then click the Open button and then click 
OK button.  
How to install
1. Click 
Start, 
Setting, and then 
Control Panel.  
2. Double click the 
Display icon.  
3. Choose the...