Samsung Syncmaster 2243sw User Manual

{943SW/943SWX} Using the Stand
Monitor Assembly
Simple Stand
HAS Stand
Monitor and Bottom
HAS Stand A. Stand Stopper
Attaching a Base This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad. Connections
20Downloaded from ManualMonitor.com Manual± 

Simple Stand
HAS Stand. Monitor
. Mounting interface pad (Sold separately)
1. Turn off your monitor and unplug its power cord.
2. Lay the LCD  monitor 
face-down on a flat surface with a cushion beneath it to protect the
screen.
3. Remove two screws and then remove the stand from the LCD monitor.
4. Align the mounting interface pad with the holes in the rear cover mounting pad and secure it with four screws that came with the arm-type base, wall mount hanger or other base. • Do not use screws longer than...

{2043SW/2043SWX} Connecting Cables
 Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.  Use a connection appropriate for your computer.
 Using the D-sub (Analog) connector on the video card.
• Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. [RGB IN]
 Using the DVI (Digital) connector on the video card.
• Connect the DVI Cable to the DVI IN Port on the back of your Monitor. [DVI...

{2043SW/2043SWX} Using the Stand
Monitor Assembly
Simple Stand
HAS Stand Connections
23Downloaded from ManualMonitor.com Manual± 

Dual Hinge Stand
Monitor and Bottom
HAS Stand A. Stand Stopper
Attaching a Base This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad. Simple Stand( Dual Hinge Stand )
HAS Stand. Monitor
. Mounting interface pad (Sold separately)
1. Turn off your monitor and unplug its power cord.
2. Lay the LCD  monitor 
face-down on a flat surface with a cushion beneath it to protect the
screen.
3. Remove two screws and then remove the stand from the LCD monitor. Connections
24
Downloaded from...

4. Align 
the mounting interface pad with the holes in the rear cover mounting pad and secure
it with four screws that came with the arm-type base, wall mount hanger or other base. • Do 
not use screws longer than the standard dimension, as they may dam-
age the inside of the Monitor.
• For 
wall mounts that do not comply with VESA standard screw specifica-
tions, the length of the screws may differ depending on their specifications.
• Do  not  use  screws  that  do  not  comply  with  the  VESA...

[RGB IN]
 Using the DVI (Digital) connector on the video card.
• Connect the DVI Cable to the DVI IN Port on the back of your Monitor. [DVI IN]
 Connected to a Macintosh.
• Connect the monitor to the Macintosh computer using the D-sub connection cable.  Note
If the monitor and the computer are connected, you can turn them on and use them.
{2243SW/2243SWX} Using the Stand
Monitor Assembly Simple Stand Connections
26Downloaded from ManualMonitor.com Manual± 

HAS Stand
Dual Hinge Stand
Monitor and Bottom
HAS Stand A. Stand Stopper
Attaching a Base This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad. Connections
27Downloaded from ManualMonitor.com Manual± 

Simple Stand( Dual Hinge Stand )
HAS Stand. Monitor
. Mounting interface pad (Sold separately)
1. Turn off your monitor and unplug its power cord.
2. Lay the LCD  monitor 
face-down on a flat surface with a cushion beneath it to protect the
screen.
3. Remove two screws and then remove the stand from the LCD monitor.
4. Align the mounting interface pad with the holes in the rear cover mounting pad and secure it with four screws that came with the arm-type base, wall mount hanger or other base. • Do not...

Using the Software
Monitor Driver
 Note
When prompted  by 
the operating system for the monitor driver, insert the CD-
ROM included with this monitor. Driver installation is slightly different from one
operating  system  to  another.  Follow  the  directions  appropriate  for  the  oper-
ating system you have.
Prepare a blank disk and download the driver program file at the Internet web
site shown here.
Internet web site :
http://www.samsung.com/ (Worldwide) Installing the Monitor Driver (Automatic)
1....