Samsung Syncmaster 2243nwx User Manual

							Specifications 
PowerSaver 
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor 
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal 
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or 
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in 
your computer. Use the software utility installed on your computer to set up this feature. 
State  Normal Operation  Power saving mode Power off (Power button) 
EPA/ENERGY 2000 
Power Indicator  On  blinking  Off
Power Consumption  50 watts Less than 1 watts Less than 1 watts
 
This monitor is EPA ENERGY STAR® compliant and ENERGY 2000 compliant when used with 
a computer equipped with VESA DPM functionality. 
As an ENERGY STAR
® Partner, SAMSUNG has determined that this product meets the 
ENERGY STAR® guidelines for energy efficiency. 
 
						

							Specifications 
Preset Timing Modes 
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted 
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual 
and adjusts the screen as follows. 
Display Mode Horizontal 
Frequency 
(kHz) Vertical 
Frequency (Hz) Pixel Clock 
(MHz) Sync Polarity 
(H/V) 
VESA. 640 x 480  31,469  59,940  25,175  -/- 
VESA. 800 x 600  35,156  56,250  36,000  +/+ 
VESA. 800 x 600  37,879  60,317  40,000  +/+ 
VESA. 1024 x 768  48,363  60,004  65,000  -/- 
VESA. 1280 x 800  49,702  59,810  83,500  -/+  
VESA. 1280 X 960  60,000 60,000  108,000  +/+ 
VESA. 1280 X 1024   63,981 60,020  108,000  +/+ 
VESA. 1440 x 900  55,935 59,887  106,500  -/+  
VESA. 1600 X 1200  75,000 60,000  162,000  +/+ 
VESA. 1680 x 1050   65,290 59,954  146,250  -/+  
VESA. 1920 X 1200  74,556 59,885  193,250  -/+ 
 
Horizontal Frequency 
The time to scan one line connecting the right edge to the left edge of the 
screen horizontally is called the Horizontal Cycle and the inverse number of 
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz 
Vertical Frequency 
Like a fluorescent lamp, the screen has to repeat the same image many times 
per second to display an image to the user. The frequency of this repetition is 
called the Vertical Frequency or Refresh Rate. Unit: Hz 
 
						

							Specifications 
General 
General 
Model Name  SyncMaster 2443NWXPLUS 
LCD Panel 
Size 24 inch (61cm)
Display area  518.4 mm (H) x 324.0 mm (V)
Pixel Pitch  0.270 mm (H) x 0.270 mm (V)
Synchronization 
Horizontal  30 ~ 81 kHz 
Vertical  50 ~ 63 Hz 
Display Color 
16.7M
Resolution 
Optimum resolution  1920 x 1200@60Hz
Maximum resolution  1920 x 1200@60Hz
Input Signal, Terminated 
RGB Analog, 
0.7 Vp-p ± 5 % 
Separate H/V sync, Composite, SOG 
TTL level (V high ≥ 2.0 V, V low ≤ 0.8 V) 
Maximum Pixel Clock 
164MHz
Power Supply 
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz 
Signal Cable 
15pin-to-15pin D-sub cable,Detachable 
Dimensions (W x H x D) / Weight (Simple Stand) 
556.2 x 360.8 x 72.9 mm ( 21.9 x 14.2 x 2.9 inch ) (Without Stand) 
556.2 x 447.4 x 227.5 mm ( 21.9 x 17.6 x 9.0 inch ) (With Stand) / 5.6 kg ( 12.3 lbs ) 
Dimensions (W x H x D) / Weight (HAS Stand)  
556.2 x 360.8 x 67.0 mm ( 21.9 x 14.2 x 2.6 inch ) (Without Stand) 
556.2 x 432.2 x 250.0 mm ( 21.9 x 17.0 x 9.8 inch ) (With Stand) / 7.7 kg ( 17.0 lbs ) 
VESA Mounting Interface 
100 mm x 100 mm  
Environmental considerations 
 
						

							 Note 
Design and specifications are subject to change without prior notice. 
 Class B Equipment (Information Communication equipment for residential use) 
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas 
including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.) 
Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C) 
Humidity : 10 % ~ 80 %, non-condensing 
Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C) 
Humidity : 5 % ~ 95 %, non-condensing 
Plug and Play Capability 
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the 
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor 
installation will proceed automatically, unless the user wishes to select alternate settings. 
Dot Acceptable 
TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) 
above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright 
sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems. 
 
						

							Specifications 
PowerSaver 
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor 
to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal 
operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or 
when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in 
your computer. Use the software utility installed on your computer to set up this feature. 
State  Normal Operation  Power saving mode Power off (Power button) 
EPA/ENERGY 2000 
Power Indicator  On  blinking  Off
Power Consumption  50 watts Less than 1 watts Less than 1 watts
 
This monitor is EPA ENERGY STAR® compliant and ENERGY 2000 compliant when used with 
a computer equipped with VESA DPM functionality. 
As an ENERGY STAR
® Partner, SAMSUNG has determined that this product meets the 
ENERGY STAR® guidelines for energy efficiency. 
 
						

							Specifications 
Preset Timing Modes 
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted 
automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual 
and adjusts the screen as follows. 
Display Mode Horizontal 
Frequency 
(kHz) Vertical 
Frequency (Hz) Pixel Clock 
(MHz) Sync Polarity 
(H/V) 
VESA. 640 x 480  31,469  59,940  25,175  -/- 
VESA. 800 x 600  35,156  56,250  36,000  +/+ 
VESA. 800 x 600  37,879  60,317  40,000  +/+ 
VESA. 1024 x 768  48,363  60,004  65,000  -/- 
VESA. 1280 x 800  49,702  59,810  83,500  -/+  
VESA. 1280 X 960  60,000 60,000  108,000  +/+ 
VESA. 1280 X 1024   63,981 60,020  108,000  +/+ 
VESA. 1440 x 900  55,935 59,887  106,500  -/+  
VESA. 1600 X 1200  75,000 60,000  162,000  +/+ 
VESA. 1680 x 1050   65,290 59,954  146,250  -/+  
VESA. 1920 X 1200  74,556 59,885  193,250  -/+ 
 
Horizontal Frequency 
The time to scan one line connecting the right edge to the left edge of the 
screen horizontally is called the Horizontal Cycle and the inverse number of 
the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz 
Vertical Frequency 
Like a fluorescent lamp, the screen has to repeat the same image many times 
per second to display an image to the user. The frequency of this repetition is 
called the Vertical Frequency or Refresh Rate. Unit: Hz 
 
						

							Information
For Better Display
 Adjust the computer resolution and screen injection rate (refresh rate\
) on the computer
as described below to enjoy the best picture quality. You can have an un\
even picture quality
on screen if the best picture quality is not provided for TFT-LCD.
•
Resolution: **** x ****
• Vertical frequency (refresh rate): 60 Hz  TFT-LCD panels manufactured by using advanced semiconductor technology \
with a
precision of 1ppm (one millionth) and above is used for this product. \
But the pixels of RED,
GREEN, BLUE and WHITE color seem to be bright sometimes or some of black\
 pixels
could be seen. This is not from bad quality and you can use it without a\
ny problems.  When cleaning the monitor and the panel outside, please apply the recom\
mended small
amount of cleaner by using a soft cloth to polish. Do not force the LCD \
area but rub softly.
If excessive force is applied, you may stain it.  If you are not satisfied with the picture quality, you can get better q\
uality of picture by
performing the  Auto Adjustment  function in display screen that is appeared as window
termination button is pressed.
If theres still noise after the automatic adjustment, use the  Fine/Coarse adjustment func-
tion.  When viewing a fixed screen for an extended period of time, a residual \
image or blur-
riness may appear.
Change the mode to energy save or set a screensaver to move the picture \
when you need
to be away from the monitor for an extended period of time.
PRODUCT INFORMATION (Image Retention Free) LCD Monitors and TVs may have image retention when switching from one im\
age to another espe-
cially after displaying a stationary image for a long time.
This guide is to demonstrate correct usage of LCD products in order to p\
rotect them from Image
retention.  Warranty
Warranty does not cover any damage caused by image retention.
Burn-in is not covered by the warranty.  What is Image retention ?
During normal operation of a LCD panel, pixel image retention doesnt oc\
cur. However, if
the same image is displayed for a long time, a slight difference in elec\
tric charge accumu-
lates between the two electrodes which encase the liquid crystal. This m\
ay cause the liquid
crystal to build up in a certain areas of the display. Thus, the previou\
s image is retained 54