Samsung Syncmaster 2233sw User Manual

							9.
Select the model that matches your monitor from the list of monitor mode\
ls on the screen,
and click Next.  
10. Click Close  → Close → OK → OK on the following screens displayed in sequence. Microsoft
®
 Windows ®
 XP Operating System Using the Software
20 
						

							1. Insert CD into the CD-ROM drive.
2. Click Start → Control Panel then click the Appearance and Themes icon.
3. Click Display icon and choose the Settings tab then click Advanced.\
...
4. Click the Properties button on the Monitor tab and select Driver t\
ab.
5. Click Update Driver... and select Install from a list or... then cli\
ck Next button.
6. Select Dont search, I will... then click Next and then click Have \
disk. Using the Software
21 
						

							7.
Click the Browse button then choose A:(D:\Driver) and choose your m\
onitor model in
the model list and click the Next button. 8.
If you can see following message window, then click the Continue Anyway\
 button. Then
click OK button.  
 Note
This monitor driver is under certifying MS logo, and this installation d\
oesnt damage your
system.
The certified driver will be posted on Samsung Monitor homepage.
http://www.samsung.com/
9. Click the Close button then click OK button continually. Using the Software
22 
						

							 
10. Monitor driver installation is completed.
Microsoft ®
 Windows ®
 2000 Operating System
When you can see Digital Signature Not Found on your monitor, follow t\
hese steps.
1. Choose OK button on the Insert disk window.
2. Click the Browse button on the File Needed window.
3. Choose A:(D:\Driver) then click the Open button and then click OK\
 button.
How to install
1. Click Start, Setting, Control Panel.
2. Double click the Display icon.
3. Select the Settings tab and click Advanced Properties button.
4. Choose Monitor. Case1 : If the Properties button is inactive, it means your monitor is\
 properly configured.
Please stop installation
Case2 : If the Properties button is active, click the Properties but\
ton then follow next
steps continually.
5. Click Driver and then click on Update Driver... then click on the N\
ext button.
6. Choose Display a list of the known drivers for this device so that I ca\
n choose a specific
driver then click Next and then click Have disk.
7. Click the Browse button then choose A:(D:\Driver).
8. Click the Open button, then click OK button.
9.
Choose your monitor model and click the Next button then click Next \
button.
10. Click the Finish button then the Close button. Using the Software
23
 
						

							If you can see the Digital Signature Not Found window then click the \
Yes button. And
click the Finish button then the Close button.
Microsoft ®
 Windows ®
 Millennium Operating System
1. Click Start, Setting, Control Panel.
2. Double click the Display icon.
3. Select the Settings tab and click Advanced Properties button.
4. Select the Monitor tab.
5. Click the Change button in the Monitor Type area.
6. Choose Specify the location of the driver.
7. Choose Display a list of all the driver in a specific location... then\
 click Next button.
8. Click the Have Disk button.
9. Specify A:\(D:\driver) then click OK button.
10. Select Show all devices and choose the monitor that corresponds to the\
 one you con-
nected to your computer and click OK.
11. Continue choosing Close button and OK button until you close the Dis\
play Properties
dialogue box.
Microsoft ®
 Windows ®
 NT Operating System
1. Click Start, Settings, Control Panel, and then double-click Displ\
ay icon.
2. In Display Registration Information window, click Settings Tab and then \
click All Display
Modes.
3. Select a mode that you wish to use (Resolution, Number of colors and Ve\
rtical frequency)
and then click OK.
4. Click Apply button if you see the screen working normally after clicki\
ng Test. If the
screen is not normal, change to a different mode (lower mode of resolut\
ion, colors or
frequency).  Note
If there is no Mode at All Display Modes, select the level of resolution\
 and vertical frequency
by referring to the Preset Timing Modes in the user guide.
Linux Operating System
To execute X-Window, you need to make the X86Config file, which is a typ\
e of system setting
file.
1. Press Enter at the first and the second screen after executing the X86\
Config file.
2. The third screen is for setting your mouse.
3. Set a mouse for your computer.
4. The next screen is for selecting a keyboard. Using the Software
24 
						

							5. Set a Keyboard for your computer.
6. The next screen is for setting your monitor.
7.
First of all, set a horizontal frequency for your monitor. (You can ent\
er the frequency
directly.)
8. Set a vertical frequency for your monitor. (You can enter the frequency\
 directly.)
9. Enter the model name of your monitor. This information will not affect t\
he actual execution
of X-Window.
10. You have finished setting up your monitor. Execute X-Window after settin\
g other re-
quested hardware.
Natural Color
Natural Color Software Program One of the recent problems in using a computer is that the color of the \
images printed out by
a printer or other images scanned by a scanner or a digital camera are n\
ot the same as those
shown on the monitor. The Natural Color S/W is the very solution for thi\
s problem. It is a color
administration system developed by Samsung Electronics in association wi\
th Korea Elec-
tronics & Telecommunications Research Institute (ETRI). This system is\
 available only for
Samsung monitors and makes the color of the images on the monitor the sa\
me as the printed
or scanned images. For more information, refer to Help (F1) in the sof\
tware program.
How to install the Natural Color software Insert the CD included with the Samsung monitor into the CD-ROM Drive. T\
hen, the initial
screen of the program Natural Color will be executed. Click Natural Colo\
r on the initial screen
to install the Natural Color software.
To install the program manually, insert the CD included with the Samsung\
 monitor into the
CD-ROM Drive, click the [Start] button of Windows and then select [Run..\
.]. Enter D:\color
\NCProSetup.exe and then press the [Enter] key. (If the drive where th\
e CD is inserted is not
D:\, enter the applicable drive.) Using the Software
25 
						

							How to delete the Natural Color software program
Select Setting/Control Panel on the Start menu and then double-click\
 Add/Delete a pro-
gram. Select Natural Color from the list and then click the Add/Delete\
 button.
MagicTune™ Installation
1. Insert the installation CD into the CD-ROM drive.
2. Click the MagicTune™ installation file.  Note
If the popup window to install the software for the main screen is not d\
isplayed, proceed
with the installation using the MagicTune executable file on the CD.
3. Select installation Language, Click Next.
4. When the Installation Shield Wizard window appears, click Next.
5. Select I agree to the terms of the license agreement to accept the ter\
ms of use.
6. Choose a folder to install the MagicTune™ program.
7. Click Install.
8. The Installation Status window appears.
9. Click Finish.
10. When the installation is complete, the MagicTune™ executable icon app\
ears on your
desktop. Double-click the icon to start the program.
MagicTune™ execution icon may not appear depending on specification o\
f com-
puter system or monitor. If that happens, press F5 Key. Installation Problems
The installation of MagicTune™ can be affected by such factors as the\
 video card, mother-
board and the network environment. Using the Software
26 
						

							System Requirements
OS
•Windows 2000
• Windows XP Home Edition
• Windows XP Professional
• Windows Vista™
It is recommended using MagicTune™ in Windows ®
 2000 or later. Hardware
• 32 MB Memory above
• 60 MB Hard disk space above
For more information, visit the MagicTune™ website. Uninstall
The MagicTune™ program can be removed only by using the Add or Remov\
e Programs
option of the Windows ®
 Control Panel.
Perform the following steps remove MagicTune™.
1. Go to [Task Tray]  → [Start] → [Settings] and select [Control Panel] in the menu. If the
program runs on Windows ®
 XP, go to [Control Panel] in the [Start] menu.
2. Click the Add or Remove Programs icon in Control Panel.
3. In the Add or Remove Programs screen, scroll down to find MagicTune™\
. Click on it
to highlight it.
4. Click the Change/Remove button to remove the program.
5. Click Yes to begin the uninstall process.
6. Wait until the Uninstall Complete dialog box appears.  Note
Visit the MagicTune™ website for technical support for MagicTune™, FAQs (questions and
answers) and software upgrades. Using the Software
27 
						

							MultiScreen
Installation
1. Insert the installation CD into the CD-ROM drive.
2. Click the MultiScreen installation file.  Note
If the popup window to install the software for the main screen is not d\
isplayed, proceed with the
installation using the MultiScreen executable file on the CD.
3. When the Installation Shield Wizard window appears, click Next.
4. Select I agree to the terms of the license agreement to accept the ter\
ms of use. Using the Software
28 
						

							5. Choose a folder to install the MultiScreen‚ program.
6. Click Install.
7. The Installation Status window appears.
8. Click Finish.
9.
When the installation is complete, the Multiscreen executable icon appea\
rs on your desktop.
Double-click the icon to start the program.
Multiscreen execution icon may not appear depending on specification of \
computer system
or monitor. If that happens, press F5 Key. Installation Problems
The installation of MultiScreen can be affected by such factors as the v\
ideo card, motherboard and the
network environment.
System Requirements
OS
• Windows 2000
• Windows XP Home Edition
• Windows XP Professional
• Windows Vista™It is recommended using MultiScreen in Windows ®
 2000 or later. Hardware
• 32 MB Memory above
• 60 MB Hard disk space above
Uninstall The Multiscreen program can be removed only by using the Add or Remove \
Programs option of the
Windows®
 Control Panel.
Perform the following steps remove Multiscreen.
Select Setting/Control Panel on the Start menu and then double-click\
 Add/Delete a program.
Select Multiscreen from the list and then click the Add/Delete button.\
 Using the Software
29