Samsung Syncmaster 2023nw Quick Start Guide

							 
 
     
 
10. Monitor driver installation is completed.  
 
 
 
    Microsoft® Windows® 2000 Operating System
 
 
When you can see Digital Signature Not  Found on your monitor, follow these steps.
1. Choose  OK button on the 
Insert disk window.  
2. Click the  Browse button on the 
File Needed window.  
3. Choose A:(D:\Driver) then click the Open button and then click  OK button. 
How to install
1. Click  Start , 
Setting  , 
Control Panel .  
2. Double click the  Display Icon.  
3. Choose the  Settings tab and then click 
Advanced...  
4. Choose  Monitor.  
5. Click  Driver and then click on 
Update Driver.. then click on the Next button.  
6. Choose  Display a list of the known drivers for this  device so that I can choose a specific 
driver  then click 
Next and then click 
Have disk.  
7. Click the  Browse button then choose A:(D:\Driver).  
8. Click the  Open button, then click 
OK button.  
9. Choose your monitor model and click the  Next button then click 
Next button.  
10. Click the  Finish button then the 
Close button.  
If you can see the  Digital Signature Not Found  window then click the 
Yesbutton. And click 
the  Finish  button then the 
Close button. 
Case1: If the Properties button is inactive, it me
ans your monitor is properly configured. Please 
stop installation 
Case2: If the Properties button is  active, click the Properties button then follow next steps 
continually.
 
 
 
   Microsoft® Windows® Millennium Operating System
 
 
1. Click  Start , 
Setting  , 
Control Panel .  
2. Double click  Display icon.  
3. Select the  Settings tab and click 
Advanced Properties  button.  
4. Select the  Monitor tab.  
5. Click the  Change button in the 
Monitor Type area.  
6. Choose  Specify the location of the driver .  
7. Choose  Display a list of all the driver in a specific location..  then click 
Next button.  
8. Click the  Have Disk button  
9. Specify A:\(D:\driver) then click  OK button.  
10. Select  Show all devices  and choose the monitor that corresponds to the one you connected to 
your computer and click  OK.  
11. Continue choosing  Close button and 
OK button until you close the Display Properties dialogue 
box.  
 
 
 
   Microsoft® Windows® NT Operating System
 
 
1. Click  Start, 
Settings , 
Control Panel , and then double-click 
Display icon.  
2. In Display Registration Information window, click Settings Tab and then click  All Display Modes.  
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) and then 
click  OK.  
 
						

							4. Click Apply button if you see the screen working normally after clicking 
Test. If the screen is not 
normal, change to a different mode (lower mode of resolution, colors or frequency).  
If there is no Mode at  All Display Modes, select the level of resolution and vertical frequency 
by referring to the  Preset Timing Modes  in the user guide.
 
 
    Linux Operating System 
 
        To execute X-Window, you need to make the  X86Config file, which is a type of system setting file.  
  1. Press Enter at the first and the second screen after executing the X86Config file.  
2. The third screen is for  setting your mouse.  
3. Set a mouse for your computer.  
4. The next screen is for  selecting a keyboard.  
5. Set a Keyboard for your computer.  
6. The next screen is for  setting your monitor.  
7. First of all, set a  horizontal frequency  for your monitor. (You can enter the frequency directly.)  
8. Set a  vertical frequency  for your monitor. (You can enter the frequency directly.)  
9. Enter the  model name of your monitor . This information will not affect the actual execution of X-
Window.  
10. You have  finished setting up your monitor.  
Execute  X-Window after setting other requested hardware.  
 
						

							 
 
1. [ ]Use this button to open the on-screen menu and exit from the menu screen or close screen 
adjustment menu. 
2. [ ]This button allows you to adjust items in the menu.
3. [ ]Press this button to activate a highlighted menu item.
4. [
AUTO ]Press to self-adjust to the incoming PC signal. The values of fine,coarse and position are 
adjusted automatically.
 
 AUTO 
 
						

							MenuDescription
AUTO  When the 
AUTO button is pressed, the Auto Adjustment screen appears 
as shown in the animated screen on the center. 
Auto adjustment allows the monitor to self-adjust to the incoming video 
signal. The values of fine, coarse and position are adjusted automatically.  
(Available in analog mode only) 
 
 
 
- If auto adjustment does not work properly, press AUTO button again to 
adjust picture with more accuracy. 
 
- If you change resolution in the control panel, auto function will be 
executed automatically. 
 
 
 Locked 
 
Menu Description
 
						

							LockedAfter pushing the MENU button more than 5 seconds, OSD function is 
locked (unlocked). You can adjust only the brightness and contrast of the 
monitor with the OSD adjustment locking feature.
 
 
 Customized key 
 
Menu Description
Customized key You can customize key assignment for the Custom button according to 
your preferences. 
To view the operating screen displayed when pressing the [   ] button 
after configuring the customized key for a function, click the name of each 
function. 
 
( Image Size
 -  MagicBright  -  MagicColor  -  Color Effect  ) 
You can configure the customized key for a required 
function via 
Setup >
Customized Key  
 
 
 Brightness 
 
						

							MenuDescription
 
Brightness When OSD is not on the screen, push the button to adjust brightness.
 
 
 
 
  Picture Brightness Contrast MagicBright
  Color MagicColor Color Tone Color Control Color Effect Gamma
  Image Coarse Fine Sharpness H-Position V-Position
  OSD Language H-Position V-Position Transparency Display Time
  Setup Reset Customized 
Key Off Timer Image Size
  Information
 Picture  
 
						

							MenuDescriptionPlay/Stop
Brightness You can use the on-screen menus to change the 
brightness according to personal preference.  
 
Direct Access Feature 
: When OSD is not on the screen, 
push the [   ] button to adjust brightness.  
 
[MENU  →
   →
   →
 ,   →
 MENU]
Contrast You can use the on-screen menus to change the contrast 
according to personal preference.  
 
[MENU 
→
   →
 ,   →
   →
 ,   →
 MENU]
MagicBright Push the   button to circle through available 
preconfigured modes. 
MagicBright is a new feature providing optimum viewing 
environment depending on the contents of the image you 
are watching. Currently seven different modes are 
available: Custom, Text, Internet, Game, Sport, Movie and 
Dynamic Contrast. Each mode has its own pre-configured 
brightness value. You can easily select one of seven 
settings by simply pressing Customized Key control 
button.  
 
 
[MENU 
→
   →
 ,   →
   →
 ,   →
 MENU] 
1) Custom  - Although the values are carefully chosen by 
our engineers, the pre-configured values may not be 
comfortable to your eyes depending on your taste. 
If this is the case, adjust the brightness and contrast by 
using the OSD menu. 
2) Text  - For documentations or works involving heavy 
text.
3) Internet  - For working with a mixture of images such as 
texts and graphics.
4) Game  - For watching motion pictures such as a game.
5) Sport  - For watching motion pictures such as a sport.
6) Movie  - For watching motion pictures such as a DVD 
or Video CD.
 
 
 
						

							 
 
 Color  
MenuDescriptionPlay/Stop
MagicColor  
[MENU →
 ,   →
   →
 →
 ,   →
   →
 MENU]
MagicColor is a new technology that Samsung has 
exclusively developed to improve digital image and to 
display natural color more clearly without disturbing image 
quality. 
 
1) Off  - Returns to the original mode.
2) Demo  - The screen before applying MagicColor 
appears on the right and the screen after applying 
MagicColor appears on the left.
3) Full  - Displays not only vivid natural color but also 
more realistic natural skin color with clearness.
4) Intelligent  - Displays vivid natural color with clearness.
 
Color Tone The tone of the color can be changed and one of four 
modes can be selected - Cool, Normal, Warm and 
Custom.  
[MENU 
→
 ,   →
   →
 ,   →
   →
 ,   →
 MENU]
Cool - Makes whites bluish.
Normal - Keeps whites white.
Warm - Makes whites reddish.
Custom - Select this mode when you want to adjust 
the image according to your preferences.
Color Control Adjusts individual R,G,B color balance. 
 [MENU 
→
 ,   →
   →
 ,   →
   →
 ,   →
   →
 ,   →
 MENU]
Color Effect You can change the overall mood by changing the screen 
colors. 
Off -This applies an achromatic color to the 
screen to adjust the screen effects.
Grayscale -The default colors of black and white are 
displayed.
Green -This applies the green color effect to a 
black and white screen.
Aqua - Select this mode when you want to adjust 
the image according to your preferences.
 
						

							 [MENU →
 ,   →
   →
 ,   →
   →
 ,   →
 MENU] 
Sepia
- This applies the Sepia color effect to a 
black and white screen.
Gamma Gamma correction changes the luminance of the colors 
with intermediate luminance. zMode 1  
zMode 2  
zMode 3  
[MENU 
→
 ,   →
   →
 ,   →
   →
 ,   →
 MENU]
 
 
 
 
 Image  
Menu DescriptionPlay/Stop
Coarse Removes noise such as vertical stripes. Coarse 
adjustment may move the screen image area. You may 
relocate it to the center using the horizontal control menu. 
(Available in analog mode only) 
 
[MENU 
→
 ,   →
   →
   →
 ,   →
 MENU]
Fine   Removes noise such as horizontal stripes. If the noise 
persists even after fine tuning, repeat it after adjusting the 
frequency (clock speed). 
(Available in analog mode only) 
 
[MENU 
→
 ,   →
   →
 ,   →
   →
 ,   →
 MENU]
Sharpness Changes the clearance of image. 
 [MENU 
→
 ,   →
   →
 ,   →
   →
 ,   →
 MENU]
H-Position Changes the horizontal position of the monitors entire 
display. 
(Available in analog mode only) 
 
[MENU 
→
 ,   →
   →
 ,   →
   →
 ,   →
 MENU]
Changes the vertical position of the monitors entire 
display. 
 
						

							V-Position(Available in analog mode only) 
 [MENU 
→
 ,   →
   →
 ,   →
   →
 ,   →
 MENU]
 
 
 
 
 OSD  
Menu DescriptionPlay/Stop
Language You can choose one of 9 languages. 
 
Note
:The language chosen affects only the language of 
the OSD. It has no effect on any software running on the 
computer. 
 
[MENU  →
 ,   →
   →
   →
 ,   →
 MENU]
H-Position You can change the horizontal position where the OSD 
menu appears on your monitor. 
 
[MENU 
→
 ,   →
   →
 ,   →
   →
 ,   →
 MENU]
V-Position You can change the vertical position where the OSD menu 
appears on your monitor. 
 
[MENU 
→
 ,   →
   →
 ,   →
   →
 ,   →
 MENU]
Transparency Change the transparency of the background of the OSD. 
 [MENU 
→
 ,   →
   →
 ,   →
   →
 ,   →
 MENU]
Display Time The menu will be automatically turned off if no adjustments 
are made for a certain time period.  
You can set the amount of time the menu will wait before it 
is turned off. 
 
[MENU 
→
 ,   →
   →
 ,   →
   →
 ,   →
 MENU]