Samsung Syncmaster 2023nw Quick Start Guide

 
 
 
Please make sure the following items are included with your monitor. If any items are missing,  contact your dealer. 
Contact a local deale
rto buy optional items.   
 
 
 
 
 Unpacking 
   
 Without stand 
  
  Monito
r 
   
 With stand 
  
  Monitor & Sim
ple Stand Bottom
 
 
   
 Manual  
 
 
Quick Setup Guide Warranty Card/ 
Registration Card  
(Not available in all  Users Guide, 
Monitor Driver
 

locations)
 
 
    
 Cable
  
D-sub Cable  Power Cord   
 
 
 
 
 
 
Front 
 
 
 
MENU button [ ] 
 Opens the OSD menu. Also use to exit the OSD menu or return to 
the previous menu.  
Customized Key 
[] 
 
 
 
 You can customize key assignment for the Custom button 
according to your preferences. 
You can configure the customized key for a required 
function via  Setup > 
Customized Key .
 
Brightness button 
[]When OSD is not on the screen, push the button to adjust 
brightness.
Adjust buttons [...

  
leaving it unattended for long periods. 
 
 
 
  
  
  
  
 
 
Rear 
Simple stand  
(The configuration at the back of the monitor may vary from product to product.)   
  
 
POWER port Connect the power cord for your monitor to the power port on the back 
of the monitor.
RGB IN portConnect the signal cable to the 15-pin, D-sub port on the back of your 
monitor. 
Kensington Lock 
  The Kensington lock is a device used to physically fix the system 
when using it in a public place. (The locking device has...

 
 
 Connecting the Monitor 
Connect the power cord for your monitor to the power port on the back of the monitor. 
Plug the power cord for the monitor into a nearby outlet.
Use appropriate connection for your computer.
 
Using the D-sub (Analog) connector on the video card. 
Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.
 
[ RGB IN ]  
Connected to a Macintosh. 
Connect the monitor to the Macintosh computer using the D-sub connection cable.
If the monitor and the...

 
 
 Monitor and Bottom   
   Attaching a Base 
   This monitor accepts a 75.0 mm x 75.0 mm VESA-compliant mounting interface pad.
Simple stand
 Monitor  
   Mounting interface pad (Sold separately) 
 
  1. Turn off your monitor and unplug its power cord.   2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen.  
3. Remove four screws and then remove the stand from the LCD monitor.  
4. Align the mounting interface pad with the holes in the rear cover mounting...

not be responsible for damages caused by using a base other than those specified.  zPlease use Wall Mount according to the International standards.  
 
 
 Installing the Monitor Driver (Automatic) 
 When prompted by the operati ng system for the monitor driver, insert the CD-ROM included 
with this monitor. Driver installation is s lightly different from one operating system to 
another. Follow the direct ions appropriate for the operating system you have. 
 
Prepare a blank disk and download the driver...

Prepare a blank disk and download the driver program file at the Internet web site shown below. 
 
zInternet web site :  http://www.samsung.com/  (Worldwide)
http://www.samsung.com/monitor  (U.S.A)
http://www.sec.co.kr/monitor  (Korea)
http://www.samsungmonitor.com.cn/  (China)
 
Microsoft® Windows Vista™ Operating System   
1. Insert your Manual CD into your CD-ROM drive.
2. Click (Start) and  Control Panel. Then, double-click on 
Appearance and Personalization . 
 
 
 
   
3. Click  Personalization...

 http://www.samsung.com/ 
6. Click  Update Driver…  in the 
Driver tab.  
 
 
   
7. Check the  Browse my computer for driver software  checkbox and click 
Let me pick from a 
list of device drivers on my computer .  
 
 
   
8. Click  Have Disk…  and select the folder (for example, D:\Drive) where the driver setup file is 
located, and click  OK.  
 
   
9. Select the model that matches your monitor from  the list of monitor models on the screen, and 
click  Next.  
  
 
10. Click  Close
→  
Close  
→...

 
 
   
 
  Microsoft® Windows® XP Operating System 
 
1. Insert CD into the CD-ROM driver.  
2. Click  Start —> 
Control Panel  then click the 
Appearance and Themes  Icon.  
 
     
 
3. Click  Display icon and choose the 
Settings tab then click 
Advanced... 
 
     
 
4. Click the  Properties button on the 
Monitor tab and select 
Driver tab.  
 
     
 
5. Click  Update Driver..  and select 
Install from a list or..  then click 
Next button.  
 
 

    
 
6. Select  Dont search ,I will..  then click 
Next and then click 
Have disk.  
 
     
 
7. Click the  Browse button then choose A:(D:\Driver) and choose your monitor model in the model list 
and click the  Next button.  
 
     
 
8. If you can see following  Message window, then click the 
Continue Anyway button. Then click 
 OK  button. 
 
  
 
This monitor driver is under certified MS logo,and this installation doesnt damage your system.The 
certified driver will be posted on Samsung Monitor...