Samsung Syncmaster 152v Quick Start Guide

Connecting Your 
Monitor
Installing the 
Monitor Driver
Installing VESA 
compliant 
mounting Removing the base
1. Turn off your monitor and unplug its power cord.  
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath i\
t to protect the 
screen.  
3. Remove the two screws and then remove the Stand from the LCD monitor.  
Attaching a base
NOTE: This monitor accepts a 100mm x 100mm VESA-compliant mounting inter\
face pad.
 
1. Rear cover mounting pad  
2. Mounting interface pad...

 
SyncMaster 153V/173V/152V/172V/193V/192V
 

  
SyncMaster 153S/173S
 

  
SyncMaster 153B/173B
 

Check List
Q & A
Self-Test Feature 
Check
 
 
Before calling for service, check the information in this section to see\
 if you can remedy any 
problems yourself. If you do need assistance, please call the phone numb\
er on the warranty 
card, the phone number on the Information section or contact your dealer .
SymptomCheck ListSolutions
No images on the 
screen. I cannot turn 
on the monitor.Is the power cord connected 
properly?Check the power cord connection 
and supply.
Can you see No Connection,...

unbalanced.Have you adjusted the 
resolution or frequency to the 
monitor?Adjust the resolution and frequency 
at the video card.  
(Refer to the Preset Display Modes ).
The screen can be unbalanced due to the cycle of the video card 
signals. Readjust Position by referring to the OSD.
The screen is out of 
focus or OSD 
cannot be adjusted.Have you adjusted the 
resolution or frequency on the 
monitor?Adjust the resolution and frequency 
of the video card.  
(Refer to the Preset Display Modes ).
LED is...

Check List
Q & A
Self-Test Feature 
Check
 
 
 
QuestionAnswer
How can I change the frequency?Frequency can be changed by reconfiguring the video 
card. 
 
Note that video card support can vary, depending on the 
version of the driver used.  
(Refer to the computer or the video card manual for 
details.) 
How can I adjust the resolution?Windows ME/XP/2000 : Set the resolution at the Control 
Panel , Display , Settings . 
 
* Contact the video card manufacturer for details.
How can I set the Power Saving...

Check List
Q & A
Self-Test 
Feature Check
 
Your monitor provides a self test feature that allows you to check wheth\
er your monitor is 
functioning properly. 
1. Turn off both your computer and the monitor.  
 
2. Unplug the video cable from the back of the computer.   
3. Turn on the monitor.  
If the monitor is functioning properly, you will see a box with a border\
 and text inside as 
shown in the following illustration: 
The three boxes inside the border are red, green and blue. 
 
Failure of any...

feet (one meter) of the monitor.  
 
zA monitor recreates visual signals received from the PC. Therefore, if t\
here is trouble with the 
PC or the video card, this can cause the monitor to become blank, have p\
oor coloring, noise, 
Video mode not supported, etc. In this case, first check the source of t\
he problem, and then 
contact a service center or your dealer. 
 

 
 
 
zJudging the monitors working condition 
If there is no image on the screen or an Video mode not supported mess\
age comes up,...

General
PowerSaver
Preset Timing 
Modes
 
 
General
Model NameSyncMaster 153V
LCD Panel
Size15.0 inch diagonal
Display area304.1 (H) x 228.1 (V)
Pixel Pitch0.297 (H) x 0.297 (V)
Typea-si TFT active matrix
Viewing Angle140/120(H/V)
Synchronization
Horizontal31 ~ 61 kHz
Vertical56 ~ 75 Hz
Display Color
16,294,277 Colors 
Resolution
Optimum resolution1024 x 768@60Hz
Maximum resolution1024 x 768@75Hz
Input Signal, Terminated
RGB Analog 0.7 Vpp positive at 75 ohms 
Separate H/V sync, TTL level positive or...