Samsung Srg 148 Owners Instructions

							      All the safety and operating instructions should be read
      before the appliance is operated.
      The safety and operating instructions should be retained
      for future reference.
    Heed Warnings
     All warnings on the appliance and in the operating 
     instructions should be adhered to.
    Follow Instructions
     All operating and use instructions should be followed
   Model and serial numbers
     Please refer to both model and serial numbers in any cor-
      respondence concerning your freezer/refrigerator.
     Data of Purchased............................
      Model No...............................................
      Serial No ...................................................
CONTENTS
SAFETY PRECAUTIONS...................................................................................................1
SAFETY INSTRUCTIONS..................................................................................................2
PARTS DESCRIPTION...................................... ...............................................................4
DOOR REVERSAL ............................................................................................................6
TO MAKE ICE CUBES.......................................................................................................7
DEFROSTING....................................................................................................................8
STORAGE AND CLEANING...............................................................................................9
TROUBLE SHOOTING ...................................................... ...............................................11
SAFETY  PRECAUTIONS 
Read Instructions
Retain Instructions
1
 
						

							SAFETY INSTRUCTIONS 
INSTALLATION
Keep regular intervals
- Leave a space of 2inch between refrigerator back and wall behind. If your refrigerator is going into a recessed 
  area in the wall, allow at least 10 inches or more clearance above the refrigerator.
This refrigerator is designed for free standing only.
- This refrigerator should not be recessed or built in.
Avoid the direct sunlight or heater
- As plastic and electrical components are affected by direct heat, never place the unit near cookers, radiators or in places 
 exposed to direct sunlight.
- Normal room temperature is recommended.
Never install the unit near water.
- Avoid locations which may be affected by  or dampness as this will impair the efficiency of the insulation.
Install on a stable, level surface.
- Make sure it is placed on  a flat,  level surface.
For personal safety, this appliance must be properly grounded.
- This refrigerator should not be grounded with telephone line,gas pipe,etc.
30cm
2
 
						

							CAUTIONS WHILE USING 
3
If the power is damaged, avoid a hazard by replacing it  through the manufacturer or its service agent or a 
similarly qualified person.
Don t use the appliance outdoors or let it be rained on.,
Do not use the appliance if it is not operating correctly or has been damaged. Disconnect it from the power supply 
and call your local service center.
Be careful not to splash water on the back of the refrigerator to use it in safety .
-The insulation of the electric parts will be impaired by water.
Avoid leaving the door open any longer than necessary as this will impair the efficiency of the unit making it more 
costly to run.
Do not use flammable sprays such as lacquer and paint near the refrigerator, because there is a possible danger of  
its ignition.
Do not put volatile chemicals such as ether and benzene in the refrigerator, because there is a  danger of explosion.
Dont allow children to hang on the door.
-Children should not be left alone or unattended in an area where the appliance is in use. They may be hurt and could damage 
the refrigerator.
The appliance is not intended for use by young children or infirm persons without supervision.
Young children should be supervised to ensure that they do not play with the appliance.
If a stationary appliance is not provide with a supply for and a plug or with other means for 
disconnection form the supply having an air gap contact separation in all active(phase)
conductors,the instructions shall state that such means for disconnection shall be 
incorporation in the fixed wiring according to the wiring rules.
 
						

							1.  TOP  TABLE (OPTION)
2.  COVER  FREEZER
3.  DRIP  WATER  TRAY
4.  CASE  THERMO
5.  SHELF  UP
6.  COVER  VEGETABLE
7. VEGETABLE-BOX
8. FOOT
9.  GUARD  BOTTLE UPP
10.GUARD  CAN
11.GUARD  BOTTLE LOW
1
23
4
5
6
7
8
11
10
9
1.  TOP  TABLE (OPTION)
2.  COVER  FREEZER
3.  DRIP  WATER  TRAY
4.  CASE  THERMO
5.  SHELF  UP
6.  SHELF  LOW
7. GUARD DOOR
8. FOOT
9.  GUARD  DOOR
10.GUARD  CAN
11.GUARD  BOTTLE
NAME OF REFRIGERATOR AND OPERATION
FRONT THE REFRIGERATOR
4
 
						

							    5
1. Place all shelves, all kinds of vessels in their proper positions which have been removed for transportation.
2. Clean refrigerator and parts to remove dust incurred during shipping.
3. Set cold control knob at COLD position and let refrigerator operate for one hour. Freezer compartment should get slightly chilled
    and motor should run smoothly with no noise but soft hum.
4. Store food after the temperature in the refrigerator gets sufficiently low. It takes a few hours after starting the refrigerator to 
    reach the proper temperature.
5. Your refrigerator is operated by a compressor which switchs on and off to maintain the intemal temperature. When the
    compressor is new it requires running in for a period of up to 2 months.During this period it may operate a little noiser than normal. 
    This  is quite normal and does not represent a fault.
CONTROL SETTINGS 
The temperature control maintains the temperature in the refrigerator. Setting the control at COOL is the 
warmest setting. Setting the control at COLDEST is the coldest setting. Set the control at COLD. 
Allow 24 hours for the refrigerator to reach the COLD  temperature.   If  you   want  a  colder  or  warmer 
temperature,move the dial one setting at a time. Moving  the  control to  OFF stops cooling but does 
not turn off the power to the refrigerator. Setting the control to one of the snowflake positions may cause 
freezing  the  refrigerator  depending on  the  room temperature.  
How To Test Temperatures
Use the milk test.  Place  a  container  of  milk  on  a shelf and check it a day later. If the milk is too warm 
or too cold, adjust the temperature control.
After changing the control, allow  24  hours  for  the refrigerator to reach the temperature you have set.
OFF
COLD
COOL
COLDEST
 All of the following should be satisifed when tested in the followingorder, check electricity supply. 
 When the cause of  trouble can not be located, contact your dealer.
INITIAL USING METHOD 
 
						

							1. Remove the two screws at the back of the top cover.
2. Remove the top cover by lifting the back up about 2 inches 
    and  then sliding it forward.
3. Remove the small plug button on the left side of the door 
    top cap.
4. Remove the three screws on the upper hinge (right side ).
    Remove the hinge .
5. Remove the three screws at the left hinge location on the 
    top plate .
6. Remove the screw in the middle of the top plate and remove 
    the top plate .
7. Lift the door up and off the bottom hinge (right side ).
8. Tilt the refrigerator cabinet  back to remove the right leveling 
    leg.
9. Romove the secrews on the bottom hinge (right side )and the 
    left  leveling leg. Move the bottom hinge to the left  side  and 
    secure it with the screws and leveling leg.
    IMPORTANT:The left leg has a spacer that must be moved 
    to the right side leveling leg when the door swing is reversed.
10. Screw the right leveling leg ,with the spacer in place,back 
    in place on the right side.
11. Position the door on the left bottom hinge .with the 
      magnetic gasket holding the door in place replace the top
      plateand screws.
12. Make sure the door is aligned with the refrigerator 
      cabinet before continuing .
13. Secure the top hinge with screws.
14. Slide the top cover back in place and replace the tow screws.
15. Put the plug button in the hole on the right side of the door top cap.  
   
DOOR REVERSAL 
Top cover 
/ cubierta por cima 
Left hinge location 
/ colocacion izquierda de gozne
Plug button 
/ taco botonDoor top cap 
/ tapapor cima 
de puerta
Spacer 
/ anillo de espaciar
Levelinglegs 
/ pie de nivelacion
Upper hinge 
/ gozne superior
Top plate 
/ lamina por 
  cima
Bottom hinge 
/ gozne inferior
6
 
						

							FREEZER
COMPARMENT       If you want to make ice cubes put the ice tray in 
       the freezer compartment.
      Hold both ends of the ice tray, remove the 
       ice cubes from the tray by twisting it gently.
       Do not bend the ice tray or it will crack.
TO MAKE ICE CUBES
 Fill water into the ice tray to the about 80%capacity. Slide the ice tray into the freezer compartment.OFFCOLDCOOLCOLDEST
 When you want to make ice cubes rapidly, the
 thermostat should be set at  COLDEST  .7
 
						

							DEFROSTING 
HOW TO DEFROST
     Empty freezer.
 Remove ice tray and frozen foods to the 
       fresh food compartment.
1
3
       Remove the frost with a soft cloth only.  
      Remove the frost with  a  cloth and  wipe the 
       freezer bottom.
  8
       Set the temperature control to OFF.
       
  With the freezer  door  opened,  set  the  temperature
      control to OFF . In 30 to 40 minutes, the frost on the 
      freezer wall will begin to  melt  and  can  be  easily  re-
      moved.
OFF
COLD
COOL
COLDEST
2
        Do not use sharp objects.
     
       If  the frost is forced off with a knife or a  screwdriver,
       the surface  of the  freezer  will be damaged or have 
       a hole made in it. From the hole ,refrigerator would 
       leak and result in inability to refrigerate.4
 
						

							STORAGE AND CLEANING
TO STORE FOOD EFFICIENTLY
   9
The procedures for replacing the bulb:
1.Unplug and disconnect the power.
2.Open the door and remove the water tray.
3.Remove the burned out bulb by rotating it.
4.Replace it with a new bulb.
5.Put the water tray back and plug the power.
Do not  load your refrigerator or  freezer with hot food.  Allow sufficient time for cooling.
It  saves  energy consumption and time for freezing.  
Cover moist foods  with  tight lids plastic containers or wrapped in  vinyl film. It prevents smell from soaking 
in the refrigerator.
Be sure not  to store  bottles such as beer,  cokes,  etc.  in  the freezer compartment.
Do not overload your set with a lot  of  foods.
This  refrigerator  is not  suitable  for  storing  the scientific  data and medicines.