Samsung Sr L629 Ev Owners Instructions
Have a look at the manual Samsung Sr L629 Ev Owners Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
10 MAKING ICE Pull out the ice-cube maker. Pour water in up to the water level mark (arrow). (Not to use hot water) Put the ice-cube maker back in position. Close the freezer door. ICE CUBE MAKER Making ice quickly To make a large quantity of ice quickly, press the “QUICK FREEZE” button to select the fast freeze function. Danger of explosion • The coldest parts of the refrigerator are the rear panel and the lowest shelf. This is the best place to store delicate foodstuffs. • Glass bottles containing liquids that can freeze should never be stored in the freezer as the glass will explode when the contents freeze. Warning Note W2-PJT(EN) 12/8/01 11:24 AM Page 10
11 USING THE WATER DISPENSER (OPTIONAL) You can easily obtain chilled water with the water dispenser without opening the refrigerator door. In addition, you can save electricity by reducing the number of times the door is opened by more than 30%. Press lever Locking device Water tank cap Water tank Water supply device WHEN THE WATER DISPENSER IS NOT IN USE, THE FOLLOWING IS RECOMMENDED FILLING THE WATER TANK Overview Fix the water supply device tightly into the fixing hole. • The door will not close automatically when the water supply device is pulled out for a long time due to the leakage of cold air. Place a spare beverage bottle by the exclusive water tank. • Two 1.5 litre bottles can be used. Open the water tank by removing the round cap and fill it with drinking water. (Do not use hot water.) • Fill the tank up to the full level (just below 4.2 litres). Replace the round cap by pushing down on it until it clicks into place. Place a cup on the cup support, then press the “PRESS” lever. Set the locking device to the “LOCK”. • When pressing the “PUSH” button with the water supply device only fixed at the fixing hole, and the locking device is set on “OPEN”, the water supply device can be removed from the fixing hole and cold leaks. When exposing to child, set the locking device to the “LOCK”.Note W2-PJT(EN) 12/8/01 11:24 AM Page 11
12 INSTALLING A REGULAR BOTTLE Press the fixing lever, lift the exclusive water tank upwards, then remove it. Remove the water supply device from the exclusive water tank, then set the inner groove of the water supply device in a regular spring water bottle and fix it in position by turning it. Turn the water supply device over and then fix it in position in the hole. • Gurgling sounds may be heard when air enters the water tank from regular mineral water or beverage bottles. • Some regular mineral water or beverage bottles may not fit the water supply device, depending on their size. • If water does not come out satisfactorily when you press the “press” button, press it again. • Do not use carbonated drinks, such as cola, cider or sodas. When you press the button, the beverage may spurt out due to the pressure of carbonic gas accumulated in the upper part of beverage bottle. • Use bottled mineral water or boiled tap water that does not contain any particles. Note W2-PJT(EN) 12/8/01 11:24 AM Page 12
13 REMOVING AND CLEANING ACCESSORIES Ice cube maker • Place a hand in the lower groove, then pull the ice cube maker forward. • Remove the ice cube maker and rinse it in water. Fresh salad drawer • Pull the super high-humidity salad drawer out as far as it will go, then remove it by lifting it slightly and pulling it towards you. • Wipe it with a damp cloth. Bottle guard • Hold the bottle guard in both hands, then remove it by lifting it slightly and pulling it towards you. • Wash it in water. Freezer drawer • Holding the freezer drawer in both hands, pull it out as far as it will go, then remove it by lifting it up slightly and pulling it towards you. • Wipe it with a damp cloth. Transparent, unbreakable shelf • Remove the shelf, then clean it using water and detergent. • When replacing the shelves, do not mix up the top, middle and bottom shelves. Rubber seals • Clean the rubber seals with a damp cloth and detergent. Use a wooden skewer wrapped in a small cloth to clean in the grooves. Before cleaning the appliance, you must always switch it off and unplug it from the wall socket. Do not use a steam cleaner. Hot steam could damage the surface of the appliance or the electrical components, with a risk of electric shock. W2-PJT(EN) 12/8/01 11:24 AM Page 13
14 CLEANING THE WATER DISPENSER Connection path Wipe over the connection path and surrounding area with a clean damp cloth. Cup Support / Dispenser Tray Cup support/Dispenser tray Press “PUSH” behind the dispenser tray slightly, then remove the dispenser tray. Using the cup support handle, pull the cup support right out. Empty the water in the dispenser tray, then clean it using warm water and detergent. Dispenser tray Cup support Water Tank / Supply Device Pull upward and disassemble the hooks on both sides of the large-sized cap. Loosen the water supply device by turning it in the direction of the arrow and removing it. Wipe the large-sized cap and the exclusive water tank with warm water and detergent. • Hold the cap and pull it upwards to remove it. Clean the cap and waste filtering bottle attached to the cap with a soft brush. After cleaning the water supply device with a soft brush, press the water supply device operation lever, then wash it in running water. • Clean the water tank frequently if it is used to dispense tea or other such beverages. Only use filtered tea. For better hygiene, beverages with a high sugar content (juice, soft drinks) are not recommended. • Deposits can be cleaned by wiping the tank with a cloth dampened in vinegar or salt water. • Check that the rubber seal on the water supply device has not slipped off or is not damaged by a sharp-edged object. Otherwise, it may leak. Caution W2-PJT(EN) 12/8/01 11:24 AM Page 14
Unscrew the cover with a philips-head screwdriver. 15 REPLACING INTERIOR LIGHTS Always unplug the appliance when replacing the refrigerator light. Otherwise, there is the danger of electric shock. - Incandescent light • Turn the interior light to pull it out and replace it with a new one. • Watt and voltage must agree with the details on the type plate. Screw the cover back with a philips-head screwdriver. INDOOR LAMP IN THE REFRIGERATOR Raise the hanging sill under the indoor lamp cover upward by pressing on it. Replace the indoor lamp with a new lamp after removing it by turning it in the direction of arrow. • Watt and voltage must agree with the details on the type plate. Insert the lower hanging sill after fitting the upper part of the indoor lamp cover. INDOOR LAMP IN THE FREEZER W2-PJT(EN) 12/8/01 11:24 AM Page 15
16 PROBLEMS AND SOLUTIONS • Please note that noises caused by the refrigerant circuit cannot be avoided. You can hear a liquid bubbling in the appliance • Do not wrap food with paper. • Store foods covered and clean the cold inlet. There is a bad smell inside the appliance • Space the food out as much as possible to improve ventilation. • Is the door fully closed? There is a layer of frost on the surface of stored food. • Food with a high water content is stored uncovered with a high humidity level or the door has been left open for a long time. • Store the food with a cover or in sealed containers. Condensation forms on the inside wall of the appliance and around vegetables • Check that the power plug is correctly connected. • Is the temperature control on the front panel correctly set? • Does sun shine on the appliance or are there heat sources nearby? • Is the back of the appliance too near to the wall? The appliance is not operating at all or the temperature is too high • Is the temperature control on the front panel set to the coldest temperature? • Is the surrounding temperature too low? • Did you put food with a high water content in the refrigerator? The food in the refrigerator is frozen • Check that the appliance is installed on a stable, level floor. • Is the back of the appliance too near to the wall? • Have any foreign objects fallen behind or under the appliance? • Is the noise coming from the compressor in the appliance? • A ticking sound may be heard inside the appliance; this is normal. This sound occurs when the various accessories contract or expand. There are unusual noises • Heat-proof pipes are installed in the front corners of the appliance to prevent condensation from forming. When the surrounding temperature rises, this may not always be effective. However, this is not abnormal. • In very humid weather, condensation may form on the outer surface of the appliance when moisture in the air comes into contact with the cool surface of the appliance. The front corners and sides of the appliance are warm and condensation starts to form W2-PJT(EN) 12/8/01 11:24 AM Page 16
17 USAGE PRECAUTIONS Store food with a high water content at the front of a refrigerator shelf. • If you store cold food, you save on electricity and improve refrigeration.Store hot food in the appliance only after it has cooled. Power Saving Tips • Install the appliance in a cool, dry room with adequate ventilation. Ensure that it is not exposed to direct sunlight and never put it near a direct source of heat (radiator, for example). • Never block any vents or grilles on the appliance. • Allow warm food to cool down before placing it in the appliance. • Put frozen food in the refrigerator to thaw. You can then use the low temperatures of the frozen products to cool food in the refrigerator. • Defrost the freezer when ice builds up. A thick coat of ice will impair the transfer of cold to the frozen products, thereby increasing power consumption. • Do not keep the door of the appliance open for too long when putting food in or taking food out. The shorter time the door is opened, the less ice will form in the freezer. • When freezing food or storing it in the freezer, place the food directly on the freezer elements in the top container. Tips W2-PJT(EN) 12/8/01 11:24 AM Page 17
VIEW OF YOUR REFRIGERATOR / FREEZER 18 REFRIGERATOR LIGHT REFRIGERATOR REFRIGERATOR SHELVES FRESH SALAD DRAWER TWIST ICE MAKER AND ICE STORAGE BIN FREEZER FREEZER DRAWER MULTI-PURPOSE GUARD BOTTLE GUARD WATER DISPENSER (OPTIONAL) FREEZER LIGHT W2-PJT(EN) 12/8/01 11:24 AM Page 18