Samsung SP-S4223 Plasma Television User Manual

							English-61
3.Tighten the screws of the plastic hanger (shown in picture 2) to the
back side of the PDP.4.Remove the Safety Pins. Fasten the 4 plastic latches assembled at
step (#) on the back side of the PDP using the guide holes of the
wall mount, push (!) and hook (@) down to secure the PDP on the
wall mount as illustrated. Secure the PDP by inserting the Safety
Pins, not to fall from the wall mount.
PDP
Wall Bracket Wall
Note: Please secure the mounting bracket on the wall surface after setting its angle at 0°
1.Secure the SET to the wall mount bracket.
(Please refer to the following instructions.)
2.Set the angle by pulling the upper end of the SET attached to
bracket in the direction of the arrow. 
(Refer to the illustration on the right.)
3.The angle can be adjusted from 0° to 15° by ±2°.Hold onto the middle of the PDP to 
adjust the angle (not the sides of the 
PDP).
How to Adjust Mounting Angle
Note: To connect external devices such as a DVD or a Home Theater System to the PDP, please refer to following instructions:
1.Be sure to remove the safety pins underneath the PDP.
Note: If the safety pins are not removed, the angle cannot be adjusted. 
Any attempt to do so may cause damage to the PDP.
2.Hold onto the bottom of the PDP and pull forward fully as directed by the arrow as illustrated)
to adjust the angle. (0°~20° by 2°) Insert the Safety Pins to the front guide holes on both
sides as illustrated in figure @.
Note: Viewing the PDP after connecting the external devices Remove the Safety Pins 
to adjust the angle to 0°, and then secure the Safety Pins again.
• For safety, be sure to secure the PDP using the safety pins. If the safety pins are not used, 
the PDP may fall, causing serious injury.
Connecting External Devices to the PDP
BN68-00991J-00Eng  5/12/06  12:25 PM  Page 61 
						

							English-62
How to assemble the Stand-Base
1.Pull the folded stand in the direction of the arrow.
➢Two or more people should carry the TV. Never lay the TV on the floor because of possible damage to the screen. 
Always store the TV upright.
Stand
Model Name
Screen Size (Diagonal)
Power Supply
Power Consumption
PC Resolution
Antenna
Input
Video
Input
Audio
Input
Sound
Output
Audio
Output
Dimensions (WxDxH)
Body
With stand
Weight
Body
With standHP-S4233
42 inch
AC 110-120V~ 60Hz
380 W
1024 x 768 @ 60 Hz
ANT 1 - CABLE IN
ANT 2 - AIR IN
75Ω unbalanced
AV1, AV2
S-VIDEO1, S-VIDEO2
COMPONENT1 - 480i/480p/720p/1080i
COMPONENT2 - 480i/480p/720p/1080i
PC
HDMI1 (DVI Compatible
HDMI2
AV1, AV2
S-VIDEO1, S-VIDEO2
COMPONENT1 - 480i/480p/720p/1080i
COMPONENT2 - 480i/480p/720p/1080i
PC
AUDIO (L/R)
OPTICAL (DIGITAL OUT)
COAXIAL (DIGITAL OUT)
41.7 X 3.9 X 28.3 inches
(1059.5 X 99.5 X 718 mm)
41.7 X 12.9 X 29.5 inches
(1059.5 X 326.5 X 749.5 mm)
73.2 lbs (33.2 kg)
77.2 lbs (35 kg)HP-S5033
50 inch
AC 110-120V~ 60Hz
480 W
1360 x 768 @ 60 Hz
ANT 1 - CABLE IN
ANT 2 - AIR IN
75Ω unbalanced
AV1, AV2
S-VIDEO1, S-VIDEO2
COMPONENT1 - 480i/480p/720p/1080i
COMPONENT2 - 480i/480p/720p/1080i
PC
HDMI1 (DVI Compatible
HDMI2
AV1, AV2
S-VIDEO1, S-VIDEO2
COMPONENT1 - 480i/480p/720p/1080i
COMPONENT2 - 480i/480p/720p/1080i
PC
AUDIO (L/R)
OPTICAL (DIGITAL OUT)
COAXIAL (DIGITAL OUT)
48.5 X 3.9 X 31.8 inches
(1232.8 X 99.5 X  807 mm)
48.5 X 14.2 X 33 inches
(1232.8 X 362.5 X 838.5 mm)
91.9 lbs (41.7 kg)
95.9 lbs (43.5 kg)SP-S4223
42 inch
AC 110-120V~ 60Hz
330 W
848 x 480 @ 60 Hz
ANT 1 - CABLE IN
ANT 2 - AIR IN
75Ω unbalanced
AV1, AV2
S-VIDEO1, S-VIDEO2
COMPONENT1 - 480i/480p/720p/1080i
COMPONENT2 - 480i/480p/720p/1080i
PC
HDMI1 (DVI Compatible
HDMI2
AV1, AV2
S-VIDEO1, S-VIDEO2
COMPONENT1 - 480i/480p/720p/1080i
COMPONENT2 - 480i/480p/720p/1080i
PC
AUDIO (L/R)
OPTICAL (DIGITAL OUT)
COAXIAL (DIGITAL OUT)
41.7 X 3.9 X 28.3 inches
(1059.5 X 99.5 X 718 mm)
41.7 X 12.9 X 29.5 inches
(1059.5 X 326.5 X 749.5 mm)
73.2 lbs (33.2 kg)
77.2 lbs (35 kg)
Specifications
➢ Design and specifications are subject to change without prior notice.
BN68-00991J-00Eng  5/12/06  12:25 PM  Page 62 
						

							English-63
Dimensions (SP-S4223/HP-S4233)
TOP VIEWFRONT VIEW
SIDE VIEWREAR VIEW
JACK PANEL DETAIL 2 1/4"H x 18 3/4"W @ 5 3/4" UP FROM BOTTOM
BN68-00991J-00Eng  5/12/06  12:25 PM  Page 63 
						

							English-64
Dimensions (HP-S5033)
JACK PANEL DETAIL 2 1/4"H x 18 3/4"W @ 5 3/4" UP FROM BOTTOM TOP VIEW
FRONT VIEW
SIDE VIEWREAR VIEW
BN68-00991J-00Eng  5/12/06  12:25 PM  Page 64 
						

							This page is intentionally
left blank.
BN68-00991J-00Eng  5/12/06  12:25 PM  Page 65 
						

							This page is intentionally
left blank.
BN68-00991J-00Eng  5/12/06  12:25 PM  Page 66 
						

							This page is intentionally
left blank.
BN68-00991J-00Eng  5/12/06  12:25 PM  Page 67 
						

							BN68-00991J-00 Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
Country
CANADA
U.S.ACustomer Care Center 
1-800-SAMSUNG (7267864)
1-800-SAMSUNG (7267864)Web Site
www.samsung.com/ca
www.samsung.com
Address
Samsung Electronics Canada Inc., Customer Service
55 Standish Court Mississauga, Ontario L5R 4B2
Canada
Samsung Electronique Canada Inc., Service à la Clientèle
55 Standish Court Mississauga, Ontario L5R 4B2
Canada
Samsung Electronics America, Inc.
105 Challenger Road
Ridgefield Park, NJ 07660-0511
BN68-00991J-00Eng  5/12/06  12:25 PM  Page 68