Samsung SP-R4212 Plasma Television User Manual

PLASMA DISPLAY PANEL
Operation
Turning the TV On and Off ............................................................32
Viewing the Menus and Displays ..................................................36
Memorizing the Channels ............................................................37
Adding and Erasing Channels ......................................................39
Setting Up Your Remote Control ....................................................42
Viewing an External Signal Source...

Turning the TV On and Off
32
Turning the TV On and Off
Press the POWER button on the remote control.
The TV will be turned on and you will be able to use its features.
You can also use the Power button on the front of the TV.
Note
•If your TV isn’t turned on when the POWER button is pressed:
Press the 
MODEbutton to check if the TV mode has been
chosen
. 
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically and subsequently:
Setting the language, checking...

3
Press the ▲or ▼button to memorize the channels of
the selected connection. 
Press the ENTER button to select “Start”.
Notes
•  If the antenna is connected to ANT 1 IN (CABLE IN),
select “Cable” and if it is connected to ANT 2 IN 
(AIR IN), select “Air”.
•If both ANT 1 IN and ANT 2 IN are connected, 
select the “Air + Cable”.
4
Select the correct signal source (STD, HRC, and 
IRC) by pressing the ▲or ▼button, then press 
the ENTER button
.
Note
•
STD, HRC, and IRC identify various types of cable
TV...

34
6
Press the ENTER button. Press the ▲or ▼button to 
select “Yes” or “No”, then the ENTER button.
“Select the time zone in which you live” menu is 
automatically displayed.
7
Press the ▲or ▼button to highlight the time zone 
for your local area (and to move the highlight to the 
appropriate time zone on the map of the United States).
Press the ENTER button. 
If you have received a digital signal, the time will 
be set automatically. If not, see page 96 to set the 
clock.
8
The message “Completed. Time...

35
If you want to reset this feature...
1
Press the MENU button. Press the ▲or ▼button to select
“Setup”, then press the ENTER button.
2
Press the ENTER button to select “Plug & Play”.
3
For further details on setting up options, refer to the 
previous page.
Note
•Plug and Play can only be accessed in the TV mode.
Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√
†More
SetupTV
MoveEnterReturn
Menu language, Channels 
and Time will be set.i
Start
BN68-00835D-00Eng_(032~045)...

36
Viewing the Menus and Displays
Your TV has a simple, easy-to-use menu system that appears on the TV screen. 
This system makes it convenient and fast to use features on the TV. 
Your TV also lets you display the status of many of your TV’s features.
Viewing the Menus
1
With the power on, press the MENU button on the
remote control. The main menu appears on the 
screen. The Input menu is selected.
2
Press the ▲or ▼button to move to items in the menu.
Press the œ/√/ENTER buttons to display, 
change, or...

37
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable
channels. After the available channels are memorized, use the CH and CH buttons to scan
through the channels. This eliminates the need to change channels by entering the channel digits.
There are three steps for memorizing channels: selecting a broadcast source, memorizing the
channels (automatic) and adding and deleting channels (manual).
Selecting a broadcast source
Before your...

38
Storing Channels in Memory 
4
Select the correct signal source (STD, HRC, and 
IRC) by pressing the ▲or ▼button, then press 
the ENTER button
.
Note
•
STD, HRC, and IRC identify various types of cable
TV systems. Contact your local cable company to
identify the type of cable system that exists in your
particular area. At this point the signal source has
been selected.
5
The TV begins memorizing all available stations. 
Press the ENTER button at any time to interrupt the 
memorization process.
Press...

39
1
Press the MENU button.
Press the ▲or ▼button to select “Channel”, then
press the ENTER button.
2
Press the ▲or ▼button to select “Add/Delete”, then
press the ENTER button.
3
Repeatedly pressing the ENTER button will alternate
between add channel and delete channel.
Press the CH or CH button to switch to the 
appropriate channel, then repeat above.
Press the EXIT button to exit.
Adding and Erasing Channels
To add channels that were not memorized (or to delete unwanted channels from memory):
Antenna :...

40
Changing Channels
Using the Channel Buttons
Press the CH or CH button to change channels.
When you press the CH or CH button, the TV changes channels 
in sequence. You will see all the channels that the TV has memorized. 
(The TV must have memorized at least three channels.) 
You will not see channels that were either erased or not memorized.
Directly Accessing Channels
Press the number buttons to go directly to a channel. For example, to select
channel 27, press “2” then “7”.  
When you use the...