Samsung Sp M305 User Manual

							Downloaded from www.Manualslib.com manuals search engine 3-6Using
 3-6-2. Projector Management using PC Software
You can monitor and control more than one projector using Samsung Projector Manager.
When installing or using Samsung Projector Manager in PC, you must log in as Administrator .
If you log in using your personal login, that  login must have full administrator privileges.
• To use Samsung Projector Manager, your PC must  meet the following minimum system requirement : 
• RAM: More than 10MB 
• Hard Disk capacity: More than 10MB
• Display resolution: More than 640 x 480 
• Supported OS : Microsoft Windows XP, Windows Vista
1. Installing the Samsung Projector Manager 
• Click Samsung Projector Manager on the CD supplied.
• Install according to the instructions displayed on the PC screen.
2. Running the Samsung Projector Manager 
When the installation of Samsung Projector Manager and t he network setup for the projector have been completed, the 
Samsung Projector Manager will be available for use.
•  Click Start > Samsung Projector > Samsung Projector Manager
• The  window appears.
3.  Using the Samsung Projector Manager 
• Projector Grouping and Registering
• To browse projectors connected to the PC automatically, press  
→ .
• To group or directly register the projectors, select 
→, right-click over   under   
						

							Downloaded from www.Manualslib.com manuals search engine Using3-6
, and then select .
• Specify the ,  and  to register, and then press . 
 • Any group whose name is not specified will automatic ally be named . To remove and / or 
rename a registered projector, right-click and t hen select  and / or  respectively.
• If a projector is not displayed on the  after registration, check if the network connection and 
the network settings are properly conf igured. See section 2-17, Connecting to a Network and section 3-5-3, 

→ for information and instructions.
• To save or load the registered projectors information, select 
→.
   
						

							Downloaded from www.Manualslib.com manuals search engine 3-6Using
• Projector Management
• You can check a projectors lamp condition, temperature, operation, errors, etc in real time.
   : You can view a projectors Name, IP Address, Group, Power On/Off status, LAMP lifespan, operation errors 
(represented by icons), etc. in real time.
 Samsung Projector Manager displays icons that indicate a pr ojectors status. The icons are listed in the tables 
below. If the icons indicate a problem with your projector, see Clearing Indicator Problems in secton 3-4, LED 
Indications.
 
Warning and Error status icons
ICONSSTATUSSTATEACTION
Error The lamp cover protecting the lamp unit is not 
properly closed. Refer to Action 2 in
 Clearing Indicator 
Problems.
Error The lamp is not operating normally. Refer to Action 5 in
 Clearing Indicator 
Problems.
Error The lamp has reached the end of it s life. The lamp needs to be replaced.
Error The cooling fan 1 is not operating normally.
Refer to Action 1 in Clearing Indicator 
Problems.
Error The cooling fan 2 is not operating normally.
Error The cooling fan 3 is not operating normally.
Error The cooling fan 4 is not operating normally.
Error The cooling fan 5 is not operating normally.
Error The cooling fan 6 is not operating normally.
Warning The internal temperature of the projector has 
risen higher than the limit. Refer to Action 4 in
 Clearing Indicator 
Problems.
Error The internal temperature of the projector has 
risen higher than the limit. Refer to Action 4 in
 Clearing Indicator 
Problems.
Error The internal temperature of the projector has 
risen higher than the limit. Refer to Action 4 in
 Clearing Indicator 
Problems.  
						

							Downloaded from www.Manualslib.com manuals search engine Using3-6
Temperature Level Status Icons
• Managing the Projectors
 : Using the icons in the  (only applicab le to V-marked projectors in the monitoring window)
  (Refresh): Updates the  status of the projector.
  (Power On): Turns on the power of the projector.
  (Power Off): Turns off th e power of the projector.
Warning The air filter has reac hed the end of its life. The air filter needs to be replaced.
Warning The air filter has been blocked by  dust. The air filter needs to be cleaned.
Error The air filter has been blocked by dust. The air filter needs to be cleaned.
ICONSSTATUSSTATEACTION
Temperature statusThe projectors internal temperature is 
normal.(standby mode) None. Its normal.
Temperature statusThe projectors internal temperature is 
normal.(low) None. Its normal.
Temperature statusThe projectors internal temperature is 
normal.(medium) None. Its normal.
Temperature statusThe projectors internal temperature is 
normal.(little bit high) None. Its normal.
Temperature statusThe projectors internal temperature is 
higher than the limit. Refer to Action 3 in Clearing Indi-
cator Problems.
Temperature statusThe projectors internal temperature is too 
high. The projector is turned off automati-
cally. Refer to Action 4 in Clearing Indi-
cator Problems.
ICONSSTATUSSTATEACTION  
						

							Downloaded from www.Manualslib.com manuals search engine 3-6Using
  (Switch Source): Selects a source from HDMI, S-VIDEO, AV, PC, MP.
  (Blank Off/Blank On): Turns the screen of the projector on or off.
 (Mute Off/Mute On):  Mutes the sound of a projector on/ off. 
  (Adjust Aspect Ratio): Adjusts the aspect ratio of the projector to either 16:9 or 4:3.
 • If the connected source does not ha ve the  feature,  is not available in the Source list. 
• If the projector does not have an [S-VIDEO IN] terminal, the  source is unusable.
 
 : Connecting the Web browser from Samsung Projector Manager
By connecting to the Web Browser in Samsung Projector Ma nager, you can use more diverse functions. To perform 
the Web browser connection, select a Projector to connect to, and then right-click to select . 
 • If the Web browser connection fails, check whether the  network connection (see section 2-17, Connecting to 
a Network) and network settings (see 3-5-3, Setup > Network) are correctly configured.
• Operating one projector using both Samsung Projector Ma nager and the Web browser at the same time may 
cause a slowdown in PC operation or an error.
   
						

							Downloaded from www.Manualslib.com manuals search engine Using3-6
• Using the  Function
 Using the  function, you can manage your projectors more efficiently.
If you select →, the following window appears.
The screen has four buttons:
•  : Adds a projector to make a Schedule for.
• : Deletes the Schedule for a selected projector.
•  : Deletes the Schedule for all of the projectors.
•   : Edits the Schedule for a selected projector.
• Registering a New Schedule To register a new sched ule, follow these steps:
1. Press the  button. The New Schedule screen appears.
2. Select the projectors to  apply the new schedule to from the  field. When you select a projector, a 
check mark appears in the check box to its left.
3. Set the , ,  , , and , and enter a  of the Schedule. 
Explanations for each of these terms is below.
 -  : Sets the name of a Schedule.
 -  : Sets the schedule repetition ( - Exec utes only once,  - Specifies a repetition date).
 -  : Determines the time at which a schedule will be executed.
 -  :  Sets Source switch or < Power On>/ 
 -  : Shows a detailed description of a Schedule.
 4. After you have entered all the information, press . You can view the registration history of a Schedule. You ca n also view the status of a Schedule. The Status codes 
are below:
 -  : Schedule complete.
 -  : Schedule still awaiting execution.
 -  : Repetitive schedule is running.
 • To save or load the registered schedule, select →.  
						

							Downloaded from www.Manualslib.com manuals search engine 3-6Using
• If you want to operate a Schedule loaded by , load the projectors information in advance. 
• Other settings 
The  selection in the Menu Bar contains two menu items,  and .
- 
 lets you select an item to be displayed in the monitoring window display. After you select 
the item, you set the display priority of the item by moving it up or down in  the list of items you have selected for 
display.
-   – When a PC is turned on, Sams ung Projector Manager will be turned on automatically.
 – Samsung Projecto r Manager will be minimized to the system tray.
  contains two selections.
-  → : Saves all of the configured settings  under Samsung Projector Manager in the desired file 
names to the corresponding folders.
-  → : Imports a saved Configuration file . Sets the Samsung Projector Manager to the saved 
settings.  
						

							Downloaded from www.Manualslib.com manuals search engine Media Play Function4-1
4 Media Play Function
4-1 Connecting a USB Storage Device and Precautions
4-1-1. Connecting a USB Device 
1.Connect your USB storage device to the USB port on the back of the projector.
- The main page of the  menu appears.
 
The main page of  can also be opened by  pressing the [MENU] button and selecting  → →
  • Supported file systems: FAT, FAT32 (NTFS is not supported.)
•
Multi Partition is not supported.
• This projector is not compatible with a multi-card reader or USB hub. 
[Selecting a Device]
2. Move to the kind of media you want to view using the  ▲/▼ buttons, press the [ ] button.
3. Move to  or  using the ▲/ ▼ buttons, and then press the [ ] button.
[Selecting a File]
4. Move to the file or folder you want to view or open using the  ▲/▼ buttons, and then press the [ ] button.
 For Document, Music, and Movie folders, a number appears  next to each folder, indicating the number of document, 
music, or movie files in the folder. For Photo folders, the  screen displays the number of photo files when you move to the 
folder.
 
5. Move to the file you want to view using the  ▲/▼  buttons, and then press the [ ] button.
4-1-2. Precautions for us ing a USB storage device
 •This product does not support multi-card readers.  
•This product does not work if the USB storage device is connected by a USB HUB.   
						

							Downloaded from www.Manualslib.com manuals search engine 4-1Media Play Function
•Some products which do not comply with standard USB specifications might not operate normally. 
•A USB storage device with automatic  recognition application or its own driver might not operate normally. 
•A USB storage device that uses only a  designated driver might not be recognized. 
•Recognition speed for USB storage device may vary by device. 
•Do not turn off the product or pull a connected USB storage dev ice out while a USB storage device is in use. Doing so may 
result in damage to the USB st orage device or stored file. 
•Use a USB storage device which contains normal files. Abno rmal files can cause a malfunction or the files may not play.
•USB storage devices must be formatt ed with the FAT or FAT32 (recommended)  file systems supported by Windows. 
 may not work normally if the USB storage device is fo rmatted with another file system. 
•If the USB storage device uses external power, please c onnect the USB storage device to its external power source.
•Use the USB cable provided with the USB  device when connecting to the projector. (For more information on purchasing 
cable and external devices, contac t the respective manufacturer.) 
•We do not guarantee   will operate if a malfunction occurs in any ex ternal device caused by your using a cable 
that does not comply with designated standards.
•As the data in USB storage device can be damaged , please back up important data to avoid loss. 
•When using a USB storage device with th e projector, subfolders with a maximum depth of 4 from the top folder are 
supported. Also, if the number of files (including folders) in  the same folder exceeds 2,900, it will not be recognized. In 
addition, if there are a large number of files on a USB device, individual files may take a long time to display.
•If an external memory device does not operate after youve connected  it to the projector, try to connect it to a PC. If it still 
does not operate normally, contact the memory devices manufacturer service center or  related customer center. 
   
						

							Downloaded from www.Manualslib.com manuals search engine Media Play Function4-2
4-2 Documents 
You can view document files in various formats saved on a USB memory device or in the projectors internal memory.
Menu displayed from the Documents screen
The Menu below appears when you press the [MEDIA.P] button while displaying the Documents screen.
 
•If you are displaying a screen or item, and then press the [MEDIA.P] button, the menu corresponding to the selected 
item  appears.
• Depending on the current language setting, folder names, f ile names, or text in a document may appear corrupted. 
If that is the case, press the [MENU] button and change the language setting in  under .
 
Menu displayed when you are viewing a document
Select the file you want using the  ▲/▼  buttons on the projector or remote control.
If you press the [MEDIA.P] button when viewing a document, the following menu appears. The Documents screen.
MENU ITEMDESCRIPTION
ViewView a document.
CopyIf an external memory device (U
SB memory device) is connected, files on the external memory 
device can be copied to the projectors internal memory and vice versa.
Copy All Files Copy all files to internal and external memory.
Delete Delete the selected file.
Delete All Files  Delete all files in a folder.
Using the remote control while viewing a document
• MEDIA.P  : Open the document menu
• ∧ PAGE 
∨  : Move to the previous or next page
Move to the previous or next sheet in a Excel file
• ▲/▼ / /  : Direction buttons
•  : Enlarge a document
•  : Return to the previous stage
•  : View information about the available buttons