Samsung Sp L221 User Manual

							Using3-5
MENUDESCRIPTION
Mode Select a screen state which is customized to your projector or change the screen mode as required.
• 
•  : This picture mode is the most general mode and works well in most situations.
•  : This mode is suitable for presentations. 
•  : This mode is suitable for text work. 
•  : This mode is suitable for viewing a movie.
•  : This picture mode is optimized for playing games.
 The text in a still picture appears unnatural. 
•  : This mode is a customized mode created using the → function. 
 Presentation and Text modes are only enabled if the input signal is a PC Timing (D-Sub/HDMI)  
signal.
  Each mode has separate controls for , , , , etc. 
When you access a mode and change (for example) the , you are changing the 
contrast for that mode only. 
 
•  : Used to adjust the contrast between the object and the background. 
•  : Used to adjust brightness of the entire picture.
•  : Used to adjust the sharpness of the picture. 
 When the input signal is PC Timing (D-Sub/HDMI), the  cannot be adjusted. 
•  : Used to adjust color lighter or darker.
 When the input signal is PC Timing (D-Sub/HDMI), the  cannot be adjusted. 
•  : Used to obtain more natural color of objects using Green or Red enhancement.
 When the input signal is PC Timing (D-Sub/HDMI) or PAL and SECAM in the [S-Video] or 
[AV] modes, the  cannot be adjusted.
 
•  : You can select the color temperature according to your preferences.
• Factory defaults: , , , 
• You can select the color temperature for the items below according to your preferences.
, ,  : Adjusts the color temperature of the White level.
, ,  : Adjusts the color temperature of the Black level.
• ------
•  : Changes the brightness characteristic for each color tone of an image. 
• The larger (+) the value, the greater the contrast of the bright and dark parts.
The smaller (-) the value, the darker the dark parts.
• Adjustable range: -3 to +3
•  : You can save the status of a screen you adjusted according to your preferences using 
the → OSD. 
•  : Restores the mode settings to the factory defaults. 
Size You can select a screen size according to the type of scene. 
 When the input signal is PC Timing (D-Sub/HDMI), / is not supported. 
• ---
Position Adjust the screen position if it is not aligned.
To adjust, select the direction you want to move the screen, and then press the arrow button pointing 
in that direction repeatedly. 
Downloaded From projector-manual.com Samsung Manuals 
						

							3-5Using
Digital NR When a dotted line is displayed or the screen shakes, you can view a better visual quality picture by 
enabling Noise Reduction. 
 When the input signal is PC Timing (D-Sub/HDMI),  does not operate. 
Black Level You can select the signal black level according to the input signal. If it is unsuitable for the input sig-
nal, the dark parts may appear clearly or may be dim.
 The  can only be set for the 480i and 576i RGB signals of [AV], [S-Video], and AV 
Timing (D-Sub) modes.
 
• For [AV], [S-Video], and the 480i and 576i signals of AV Timing (D-Sub).
•  : Sets the black level to .
•  : Sets the black level to .
• For the RGB signal of  mode.
•  : Used in a normal environment.
•  : Used when the dark part is shown too bright.
Overscan  Using this function, you can cut the edge of the picture when unnecessary information or images 
appear on the edge of the picture.
 This is not supported in [AV] and [S-Video] modes.  This is supported only when the input signal is AV Timing (D-Sub) or AV Timing (HDMI).  If  is turned off, unnecessary extra parts at the edges of an image may be shown.
In this case, turn  on.
 
Film Mode  Using this function, you can set the display mode optimized for playing movies.
•  - 
  can only be supported for the [AV], [S-Video], 480i, and 576i of AV Timing (D-
Sub) signals.
 
PC Eliminates or reduces noise that causes unstable screen quality, such as screen shaking. If the noise 
is not removed using Fine Adjustment, adjust the frequency to the maximum and then perform Fine 
Adjustment again. 
 These functions are only enabled for the PC Timing (D-Sub/HDMI) input of the D-Sub terminal.  Refer to PC Timing (D-Sub/HDMI). 
•   : Used to adjust the frequency and phase of PC screen automatically. 
•   : Used to adjust the frequency when vertical lines appear on PC screen.
•   : Used to fine tune the PC screen. 
•   : Using this function, you can reset the PC menu settings to the factory default settings. 
Zoom  Enlarges the PC screen to 2X, 4X, or 8X.
 This function is only enabled when the input signal is PC Timing (D-Sub/HDMI). 
MENUDESCRIPTION
Downloaded From projector-manual.com Samsung Manuals 
						

							Using3-5
 3-5-3. Setup
MENUDESCRIPTION
Install To tailor the picture to the installation location, you can invert the projected images vertically / hori-
zontally. 
•  : Normal Image 
•  : Horizontal/Vertical Reversed Image 
•  : Horizontally Reversed Image 
•  : Vertically Reversed Image 
Lamp Mode  Used to set the image brightness by adjusting the amount of light generated by the lamp.
•  : This mode is optimized for screens smaller than 100 inches.
This mode decreases the lamp brightness and power consumption in order to extend the lamp 
lifetime and reduce noise and power consumption.
•  : This mode maximizes the lamp brightness when the ambient illumination is bright. As 
the brightness of the lamp increases, the lamp lifetime can be reduced and the noise and power 
consumption may increase.
Auto Keystone If video scenes are distorted or tilted, you can compensate for this by setting the  
function to  so that the  function automatically starts.
• - 
V-Keystone  If video scenes are distorted or tilted, you can compensate for this using the vertical Keystone func-
tion. 
 The sound output of your projector is temporarily stopped while the keystone is being changed.  The keystone is not compensated for in the On Screen Display (OSD). 
Background You can set the Background that is displayed when there is no signal from the external device con-
nected to the projector.If a signal is received, the Background you set disappears and a normal 
screen is displayed. 
• --
Test Pattern Generated by the projector itself. Use to optimize the installation of the projector. 
•  : You can check whether the picture is distorted or not. 
•  : You can refer to picture format sizes such as 1.33 : 1 or 1.78 : 1. 
Downloaded From projector-manual.com Samsung Manuals 
						

							3-5Using
Video Type If the screen quality is abnormal as a result of the projector not identifying the input signal type auto-
matically in  or  mode, you can manually set the input signal.
 In  mode,  is only enabled if the input signal is AV Timing (D-Sub). However, 
for a separate H/V sync.,  is only enabled for the 1280 x 720p 59.94 Hz/60 Hz 
signals.
  In  mode,  is only enabled for the 640x480p 59.94Hz/60 Hz and 
1280x720p 59.94Hz/60 Hz signals.
 
•  --- :  mode
•  -- :  mode
Caption The  function is supported when subtitles are contained in the external analog signal (from 
either the Video or S-Video terminal). 
 The  function will not operate in  (including components) or  mode.  Depending on the external signal, a change to the channel or  settings may be required.  Each  and  contains different information.  carries additional 
information to supplement information contained in .
(e.g. If English subtitles are provided on , Spanish subtitles will be provided on 
.)
 
•  : -
•  : -
•  : -
•  : -
Reset Using this function, you can reset various settings to the factory default settings. 
•  : Changes the settings to the factory defaults.
•  : Resets the filter time.
MENUDESCRIPTION
yniOwjPUsageColor,
Sharpness,Tint PC menu and 
zoom






 




 yniOh}P
€w‰w™Oh}P
l•ˆ‰“Œ‹
l•ˆ‰“Œ‹
l•ˆ‰“Œ‹
Tl•ˆ‰“Œ‹
l•ˆ‰“Œ‹
l•ˆ‰“Œ‹ 

T wj
h}
hœ›–
Downloaded From projector-manual.com Samsung Manuals 
						

							Using3-5
 3-5-4. Option
MENUDESCRIPTION
Language You can select the language used for the menu screen.
Menu Option •  : You can move Menu Position up/down/left/right. 
•  : You can set the translucency of the menu. 
• ---
•  : You can set the display time of the menu.
• ------
Sound Adjusts the right and left audio balance and equalizer of the 3W stereo speaker embedded in the pro-
jector.
• -----
Filter Check Time Sets the check period for the filter. (Unit: hour)
• ----
 If the filter usage time is larger than the filter check period, the filter check message is 
displayed for a minute whenever the projector is turned on. 
  Filter check message: Check the filter, and if necessary, clean or replace it..  
Auto Power On With Auto Power On, if power is supplied to the projector, it turns on automatically without your press-
ing the Power button.
• -
Sleep Timer With Sleep Timer on, if there is no input signal for the specified time, the projector turns off automati-
cally.
(There must be no button input from the remote control or the top of the projector for the specified 
time)
• --- 
Information You can check external source signals, picture setup, PC picture adjustment. 
Downloaded From projector-manual.com Samsung Manuals 
						

							4-1Troubleshooting
4 Troubleshooting
4-1 Before Requesting Service
 Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest 
Samsung Electronics Service Center.
 
Symptoms Troubleshooting
Installa-
tion and 
Connec-
tion No Power. Check the power cable connections. 
I want to install my projector on the ceiling.  The ceiling installation support is sold separately. Contact your 
local product distributor. 
External Source can not be selected. Be sure that the connection cable(s) (video) is properly con-
nected to the proper port. If the device is not connected prop-
erly, it can not be selected.
Menu and 
Remote 
Control Remote control does not work. Be sure that the proper external source is selected. 
Check the battery in the remote. If there is something wrong 
with it, replace it with a new battery of the recommended size. 
Be sure to aim the remote at sensor on the back of the unit and 
at a distance of no more than approximately 23 feet(7 m). 
Remove any obstacles between your remote control and the 
product.
Direct light from 3-way light bulbs or other lighting devices on 
the remote sensor of the projector may affect the sensitivity 
and cause the remote control to malfunction. 
Check if the remote control battery compartment is empty. 
Check whether the LED indicator on the top of the projector is 
turned on.
I cannot select a menu. Check if the menu is displayed in gray. A gray-colored menu is 
unavailable.
Downloaded From projector-manual.com Samsung Manuals 
						

							Troubleshooting4-1
Screen and 
External 
Source Cannot see picture images. Be sure that the power cord of the projector is connected.
Be sure that the proper input source is selected.
Check that the connectors are properly connected to the ports 
at the back of the projector.
Check the Remote Control batteries.
Be sure that the  and settings are not at 
their lower limit.
Poor color.  Adjust the  and . 
Images are not clear. Adjust the focus. 
Check if the projector is too far from or too near to the screen.
Strange noise. If a strange sound continues, contact your Service Center. 
The operating LED is lit up. Refer to Corrective Actions According to LED Indications. 
Lines appear on screen. On screen noise may occur when using your PC. Adjust the 
frequency (refresh rate) of the screen.
No external device screen is displayed. Check the operating status for the external device and check 
whether the adjustment items, such as the  and 
the  have been changed correctly in the  
command screen of the Projector menu. 
Only a blue screen appears. Be sure to properly connect the external devices. Check the 
connection cables again.
Screen appears in black and white or odd 
color or screen is too dark or bright.As mentioned above, check the adjustment items such as 
, , or  in the menu. 
If you want to restore various settings to their factory defaults, 
run from the menu. 
Symptoms Troubleshooting
Downloaded From projector-manual.com Samsung Manuals 
						

							5-1More Information
5 More Information
5-1 Specifications
 This Class B equipment is designed for home and office use. The equipment has been registered regarding EMI for 
residential use. It may be used in all areas. Class A is for office use. Class A is for business while class B emits less 
electromagnetic waves than class A.
 
MODEL SP-L201 SP-L221SP-L251
PanelSize 0.63 3P LCD
Resolution XGA (1024 x 768)
Aspect ratio 4:3
Power Power Consumption  270 W (Power off : Less than 0.5W)
Voltage 100~240V AC, 50/60Hz
LampPower Consumption  203W ( Eco : 172W )
Life Time 2,500 Hours (Eco : 3,000 Hours )
Dimension  291 x 289 x 127 mm / 11.46 x 11.38 x 5 inches
Weight 3.8 Kg / 10.2 lbs
Key Features Brightness  2,000 ANSI 2,200 ANSI 2,500 ANSI
Contrast 500:1
Screen Size (Diagonal)  Diagonal 40 inches ~ 300 inches 
Projection Range 1 m ~ 10 m / 39.37 inches ~ 393.70 inches
Keystone Vertical (±20°)
Zoom Adjustment  Manual
Focus Adjustment Manual
Lens F=1.65~1.93, f=18.5mm~22.5mm
Zoom Ratio  1:1.2
Input signal D-Sub 15p  Analog RGB, analog YPbPr
HDMI Digital RGB, digital YCbCr
Mini DIN x 1 S-Video
RCA x 1  Composite video
Speaker 3W x 2 (Stereo)
User Environ-
ment Temperature and Humidity  Operating : Temperature 41 °F ~ 95 °F (5 °C ~ 35 °C),
Humidity 20 % ~ 80 % (Non-condensing)
Storage : Temperature -14 °F ~ 140 °F (-10 °C ~ 60 °C),
Humidity 10 % ~ 90 % (Non-condensing)
Noise Eco : 30dB, Bright : 32dB
Downloaded From projector-manual.com Samsung Manuals 
						

							More Information5-1
 The LCD panel used in the LCD projector consists of hundreds of thousands of fine pixels. Like other video display devices, 
the LCD panel may contain bad pixels which do not operate. When shipping a product, the conditions for identifying bad 
pixels and the number of bad pixels that a LCD panel is allowed to contain are strictly managed in accordance with the 
relevant specified standards by the LCD panel manufacturer and our company. Though a screen may have some dead 
pixels, this does not affect the overall screen quality and the lifetime of the product.
 
Downloaded From projector-manual.com Samsung Manuals 
						

							5-2More Information
5-2 RS-232C Command Table
Communication Format (Complies with the RS232C Standard)
• Baud rate : 9,600 bps 
• parity : None
• Data bits : 8, stop bit : 1
• Flow Control : None
Serial Communication Protocol
1.Command Packet Structure [7bytes]
• A command packet consists of 7 bytes in total.
• The two bytes 0x08 and 0x22 signify that the packet is for serial communication.
• The following 4 bytes represent a pre-defined command that can be defined by the user.
• The last byte is the checksum which checks the validity of the current packet.
• Header [2 Byte]: Pre-defined values fixed to 0x08 and 0x22.
• Cmd1 [1 Byte]: The first value of the code defined in the command list (Hexadecimal)
• Cmd2 [1 Byte]: The second value of the code defined in the command list (Hexadecimal)
• Cmd3 [1 Byte]: The third value of the code defined in the command list (Hexadecimal)
• Value [1 Byte]: Input parameter for the command (Default: 0) (Hexadecimal)
• CS [1 Byte]: Checksum (the 2’s complement of the sum of all the values except for the CS value.)
2.Response Packet Structure [3 Bytes]
1.Success
2.Fail
• When the received packet from an external device has a valid value, a Success packet is sent. Otherwise, a Fail 
packet is sent.
• A Fail packet is sent if:
• The received packet length is not equal to 7 bytes.
• The 2 byte packet header value is not equal to 0x08, 0x22.
• The check sum is incorrect.
• Failure detection by an external device
• An external device classifies the packet as Fail if it does not receive a Success packet within 100ms. 0x08 0x22 cmd1 cmd2 cmd3 value CS
0x03 0x0C 0xF1
0x03 0x0C 0xFF
Downloaded From projector-manual.com Samsung Manuals