Samsung Sp H500 User Manual

Downloaded from www.Manualslib.com manuals search engine Connecting to PCConnecting to PC
61
CAUTION
DVI-D cable does not support
analog RGB signals.
PC Video Cable
(15-pin signal)DVI-D
(supports only digital signals)
This appliance supports VESA Plug & Playand
recognizes connection to PC automatically.
VESA Plug & Play
Pin Configuration of PC Video Port Plug
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15Red (R)
Green (G)
Blue (B)
Ground 
Ground  (DDC)
Red (R) Ground
Green (G) Ground
Blue (B) Ground
Reserved
Ground...

Downloaded from www.Manualslib.com manuals search engine Automatic Picture Adjustment
Used to adjust frequency and phase of PC screen automatically.
Connecting to PC
Automatic Picture Adjustment
62
Before adjusting!
Set the input mode to PC.
1
MENU
2, 3, 4
Select
2, 3
…/†
5
EXIT
PC
Press the MENUbutton.
The main menu is displayed.1
Press the or button to move to Setup.
The Setupmenu is displayed.
Press the  button.
2
Press the or button to move to PC, then
press the  button.
The Auto Adjustmentis...

Downloaded from www.Manualslib.com manuals search engine Connecting to PC
Frequency Adjustment 
63
1
MENU
2, 3, 4
Select
2, 3, 4
…/†/œ/√
5
EXIT
Frequency Adjustment 
Used to adjust frequency when vertical lines appear on PC screen.
Before adjusting!
Set the input mode to PC.
PC
Press the MENUbutton.
The main menu is displayed.1
Press the or button to move to Setup.
The Setupmenu is displayed.
Press the  button.
2
Press the or button to move to PC, then
press the  button.
The PCmenu is displayed.3...

Downloaded from www.Manualslib.com manuals search engine Fine Tuning with the Phase Adjustment
Used to fine tune the PC screen.
Connecting to PC
Fine Tuning with the Phase Adjustment
64
1
MENU
2, 3, 4
Select
2, 3, 4
…/†/œ/√
5
EXIT
Before adjusting!
Set the input mode to PC.
PC
Press the MENUbutton.
The main menu is displayed.1
Press the or button to move to Setup.
The Setupmenu is displayed.
Press the  button.
2
Press the or button to move to PC, then
press the  button.
The PCmenu is displayed.3...

Downloaded from www.Manualslib.com manuals search engine Connecting to PC
Zooming the Screen
65
1
MENU
2, 3, 4, 5
Select
2, 3, 4, 5
…/†/œ/√
6
EXIT
Zooming the Screen
Used to extend PC screen from the center.
Before adjusting!
Set the input mode to PC.
PC
Press the MENUbutton.
The main menu is displayed.1
Press the or button to move to Setup.
The Setupmenu is displayed.
Press the  button.
2
Press the or button to move to PC, then
press the  button.
The PCmenu is displayed.3
Press the EXITbutton to...

Downloaded from www.Manualslib.com manuals search engine Connecting to PC
Reset the PC
66
1
MENU
2, 3, 4, 5
Select
2, 3, 4, 5
…/†/œ/√
6
EXIT
Reset the PC
Used to reset PC mode settings to the Factory Default values.
Before adjusting!
Set the input mode to PC.
PC
Press the MENUbutton.
The main menu is displayed.1
Press the or button to move to Setup.
The Setupmenu is displayed.
Press the  button.
2
Press the or button to move to PC, then
press the  button.
The PCmenu is displayed.3
Press the...

Downloaded from www.Manualslib.com manuals search engine Connecting to PC
Reset the PC
67
VISUAL REALISM
Troubleshooting
Before Contacting Service Personnel........68  

Downloaded from www.Manualslib.com manuals search engine Troubleshooting
Before Contacting Service Personnel
68
SymptomsTroubleshootingNote
Installation and Connection
Menu and Remote Control
Be sure that the power cord in place and the power switch
on the rear side of the projector is turned on 
-. 
No Power.Page 15
Be sure to make the projection beam perpendicular to the
screen and adjust the focus using the Zoom Knob and the
Focus Ring. Avoid to use the 
V-Keystonefunction if possible.
Image is...

Downloaded from www.Manualslib.com manuals search engine Troubleshooting
Before Contacting Service Personnel
69
Screen and External Source
SymptomsTroubleshootingNote
Be sure that the power cord of the projector is in place.
Be sure that the proper input source is selected.
Be sure that cable is properly connected to the rear panel
of the projector.
Check the Remote Control batteries.
Be sure that the Color, Brightnesssettings are not at their
lower limit.
Cannot see picture
images.Page 15
Page 26...

Downloaded from www.Manualslib.com manuals search engine