Samsung Sp A900b User Manual

2. Click on [Settings] tab and set the  by 
referring to  described in the display mode 
table supported by this projector. 
You do not have to change  setup.
3. Press the [Advanced] button. 
Another property window will appear.
4. Click on [Monitor] tab and set the  by 
referring to  described in the Supported 
Resolution/Size Modes table.  
Set up both the vertical and horizontal frequency instead of 
.
5. Click the [OK] button to close the window, and click the 
[OK] button of the  window to close the...

 
 
 projector. If not, there may be signal problems.
 
 
 
| Basic Settings| Connecting the Power| Connecting to video equipment| 
 
 
 
  
 
  
 
   
1. Rear of Projector 
  
Plug the power cord into the power terminal on the rear side of the projector. 
 
When used outside of the U.S., HAR cord with fittings of an approved agency may be used.
 
 
 
| Basic Settings| Connecting the Power| Connecting to video equipment| 
 
 
 
 Connecting a DVD player/Cable/Satellite Box to HDMI/DVI
 
Downloaded From...

 
 
 
- Connecting using a HDMI/DVI cable 
Connect the [HDMI 1/DVI IN] terminal on the back of the projector and the DVI output terminal of the DVD 
player/Cable/Satellite box using a HDMI/DVI cable.
- Connecting using a HDMI cable
Connect the [HDMI 1/DVI IN] or [HDMI IN 2] terminal on the back of the projector and the HDMI output terminal of the 
DVD player/Cable/Satellite box using a HDMI cable.  
When the connection is finished, connect the power of your projector and DVD player/Cable/Satellite box....

 
 
 
Connect the [COMPONENT IN 1 (Y/PB/ PR)] or [COMPONENT IN 2 (Y/PB/ PR)] input port at the back of the projector 
to the Component port at the back of the DVD player/Cable/Satellite box with the Component cable. 
When the connection is finished, connect the power of your projector and DVD player/Cable/Satellite box. 
  
Using the Projector  
  Turn on the projector and press the [COMP1] button to select . 
 
Press the [COMP2] button to select  if [COMPONENT IN 2] is connected. 
When Component Mode is...

 
 
 
Connect [VIDEO IN(yellow)] input port of the projector to the VIDEO (yellow) OUT port of video equipment using the 
video cable. 
- If the video equipment has S-VIDEO OUT port, connect it to [S-VIDEO IN] input port of the projector.
Using the S-VIDEO connection, provides a higher visual quality.
When finishing connecting the devices, connect the power of the projector and the VCR. 
  
 Using the Projector  
  Turn on the projector and press the [Video] button to select . 
or 
 
Press the [S-VIDEO]...

 
 
 
Connect [PC IN] port on the rear side of the projector to the monitor output port of the PC using a PC video cable. 
When connections are all completed, connect both power codes of the projector and the PC.
This product supports plug and play and therefore, if you use Window XP you do not need to setup the driver 
on your PC.
  
 Using the Projector  
  Turn on the projector and press the [PC] button to select . 
If PC Mode is not available, check PC video cable is in place. 
 
Turn on the PC and...

 
 
 |  Input | Picture | Setup | Option | 
 
 
 
 
* Click the Play( )/Stop( ) button in the table below to view the  video file. 
Screen 
Adjustment  Description 
Play/Stop 
Source List  You can select a device connecte d to the projector to display. 
  1) Component 1  5) PC 
2) Component 2   6) HDMI 1 
3) S-Video  7) HDMI 2
4) Video   
Edit NameYou can edit the names of device s connected to the projector. 
  1) Component 1  5) PC 
2) Component 2   6) HDMI 1 
3) S-Video  7) HDMI 2
4) Video   
 
 
 
|...

* Click the Play( )/Stop( ) button in the table below to view the video file. 
Screen 
Adjustment  Description 
Play/Stop 
Mode Select a screen state which is customized to your projector or  change the screen mode 
as required. 
 
1) Mode
  - Dynamic   
Select this if you want the screen quality to be clearer than s tandard screen 
quality. 
  -Standard  
You can comfortably view the pro jection screen if the surrounding is somewhat 
bright. 
  - Movie1, Movie2   
Select this if your surroundings  are...

1) Color Temperature  5) R-Offset 
2) R-Gain   6) G-Offset 
3) G-Gain  7) B-Offset 
4) B-Gain    G-Offset  
B-Offset 
 
8) Gamma  : An image compensation function  that controls the settings according to the 
video properties. 
 
  -Film  : The best setting f or watching a film.
  -Video  : The best setting for w atching a TV program.
  -Graphic  : The best setting when you have a PC connected.
Gamma
  9) DynamicBlack™  : Adjusts the brightne ss and contrast of the screen by adjustin g the 
tightening...

   1) Off  : Shows the picture in the original color. 
  2) Monochrome  : Shows the picture in black and  white by filtering out all color 
signals.
  3) Red  : Shows the picture in red by fi ltering out the green and blue color signals.
  4) Green  : Shows the picture in green by filtering out th e red and blue color signals.
  5) Blue  : Shows the picture in blue by f iltering out the red and green color signals.
OverscanUsing this function, you can cut the edge of the picture when u nnecessary...