Samsung Series 8 User Manual

							
English - 2

Network Setup
Network Selection
Select Cable or Wireless as the method to connect to the network.
The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is connected. (See page 28)
Cable: Connect to network using a cable.
Wireless: Connect to network wirelessly.
Cable Network Setup
Internet Protocol Setup → Auto / Manual
Network Test: You can test or confirm the network connection status after setting up the network.
When unable to connect to a wired network
If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the first time and authenticates the MAC address each time you connect to the Internet, y our TV may not be able to connect to the Internet as the MAC address differs from that of the device (PC) used to connect to the Internet the first time. In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV) to the Internet. If your Internet service provider requires an ID or password to conne ct to the Internet (network), your TV may not be able to connect to the Internet. In this case, you have to enter your ID or password when connecting to the Internet using an Internet Sharer (Router).
The internet connection may fail due to a firewall problem. In this case, contact yo ur Internet service provider. If you cannot connect to the Internet even if you have followed the procedures \
of your Internet service provider, please contact a Samsung Electronics Service Center.
Wireless Network Setup
Internet Protocol Setup → Auto / Manual
Network Test: You can test or confirm the network connection status after setting up the network.
When unable to connect to a wireless network
Your TV may fail to locate an AP that is configured as a private SSID type. In this case, please change the AP settings and try again. If your Internet service provider has registered the MAC addr\
ess of the device used to connect to the Internet for the first time and authenticates the MAC address each time you connect to the  Internet, your TV may not be able to connect to the Internet as the MAC address differs from that of the device (PC) used to connect to the Internet the first time. In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV) to the Internet. If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider, please contact a Samsung Electronics Service Center.
Select Access Point: You can select the IP sharer to use when using a wireless network.
If a wireless Access Point is not in the Access Point list, press the Red button.
When the connection is made, you will be returned to the screen automatically.
If you selected an Access Point that requires security authentication, enter the security key.
If you have selected an Access Point with a security authentication:
The Security Key input screen appears.
Enter the security key and press the ENTERE button.
Using the Remote Control Buttons on the Security Key Input Screen.
Cable Network Setup-Auto
If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically configured. Please check if the LAN cable is connected. (See page 27)
1.	Set “Network Selection” to “Cable”.
2.	Select “Cable Network Setup”.
3.	Set “Internet Protocol Setup” to “Auto”.
4.	Select “Network Test” to check the network connectivity.
❑
N


❑


N
❑


N

N
N
N
N
-
-
-
Setup
Language : EnglishTime
Network	Selection	 :	 Cable	 ►
Wireless Network Setup Cable Network SetupChild Lock  : OnChange PINParental LockSubtitleTeletext Language : - - - - 

BN68-01701B-ENG.indb   292008-09-10   �� 11:13:42 
						

							
English - 0
Cable Network Setup-Manual
To connect the TV to the LAN using a static IP address, you must set up the Internet Protocol (IP). Please check if the LAN cable is connected. (See page 28)
1.	Set “Network Selection” to “Cable”.
2.	Select “Cable Network Setup”.
3.	Set “Internet Protocol Setup” to “Manual”.
4.	Set up “IP Address”, “Subnet Mask”, “Gateway” and “DNS Server”.
Press the number buttons on the remote control when you set the Network manually.
5.	Select “Network Test” to check the network connectivity.
Wireless Network Setup-Auto
The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is connected. (See page 28) 
If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically configured. The wireless IP sharer to be connected to this product must support DHCP.
1.	Set “Network Selection” to “Wireless”.
2.	Select “Wireless Network Setup”.
3.	Set “Internet Protocol Setup” to “Auto”.
4.	Select an AP through “Select Access Point”.
5.	Select “Network Test” to check the network connectivity.
Wireless Network Setup-Manual
The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is connected. (See page 28)
1.	Set “Network Selection” to “Wireless”.
2.	Select “Wireless Network Setup”.
3.	Set “Internet Protocol Setup” to “Manual”.
4.	Select an AP through “Select Access Point”.
5.	Select “Network Test” to check the network connectivity.
N
Source List / Edit Name
Source List
Use to select TV or other external input sources such as DVD players or Cable Box / Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice.
TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI1, HDMI2 / DVI, HDMI3, HDMI4, USB, DLNA.
You can choose only those external devices that are connected to the TV. In the “Source List”, connected inputs will be highlighted and sorted to the top. Inputs that are not connected will be sorted to the bottom.
Using the Colour buttons on the remote with the Source list
Red (Refresh): Refreshes the connecting external devices.
TOOLS (Option): Displays the “Edit Name” and “Information” menus.
Press the SOURCE button on the remote control to view an external signal source. TV mode can be selected by pressing the TV button, number buttons (0~), and the P < / > button on the remote control.
Edit Name
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / TV / IPTV / Blu-ray / HD DVD / DMA
Name the device connected to the input jacks to make your input source selection easier.
When a PC with a resolution of 1920 x 1080@60Hz is connected to the HDMI IN 2 port, you should set the “HDMI2 / DVI” mode to “PC” in the “Edit Name” of the “Input” mode.
❑

N
N
-
-
O
❑

N
TV
SETRESET
VCRDVD STB
TV
SETRESET
VCRDVD STB
Source List
Edit Name
Input

BN68-01701B-ENG.indb   302008-09-10   �� 11:13:42 
						

							
English - 
Product Guide
The Product Guide gives you information on the most important features of this TV.
1.	Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Application”, then press the ENTERE button.
2.	Press the ▲ or ▼ button to select “Product Guide”, then press the ENTERE button.
3.	Press the ◄ or ► button to select a Guide (“Picture Quality”, “Entertainment” or “Connectivity”) and press the ENTERE button.
4.	You can navigate the Product Guide screen by using the ◄ and ► buttons.
Picture QualityFull HD 1080p
100Hz Motion Plus 
EntertainmentInfoLive
Content Library
Entertainment Mode
ConnectivityWISELINK Pro
DLNA
4HDMI
Anynet+
5.	Press the EXIT button to exit.
Using the Remote Control Button in Product Guide Menu
ButtonOperations
Yellow ButtonShows the contents of the Product Guide sequentially. (AutoPlay)
Wheel (◄/►)Move the cursor and select an item.
ENTERESelect the currently selected item.
RETURNReturn to the previous menu.
EXITStop the current function and return to the “Product Guide” main menu.
WISELINK Pro
Connecting a USB Device
1.	Press the POWER button to turn the TV on.
2.	Connect a USB device containing photo, music and/or movie files to the WISELINK jack (USB jack) on the side of the TV.
If you enter the WISELINK Pro mode with no USB device connected the message ‘No external storage device found. Check the connection status.’ will appear. In this case, insert the USB device, exit the screen by pressing the W.LINK button on the remote control and enter the WISELINK Pro screen again.
MTP (Media Transfer Protocol) is not supported. 
The file system only supports FAT16/32 (The NTFS file system is not supported).
Certain types of USB Digital camera and audio devices may not be compatible wi th this TV.
WISELINK Pro only supports USB Mass Storage Class devices (MSC). MSC is a  Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card Readers (Both USB HDD and HUB are not supported.)
Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB compatibility problem.
N
N
N
N
N
N
ApplicationContent LibraryInfoLive 
Product	Guide	 	 ►
TV Side Panel
USB Drive

BN68-01701B-ENG.indb   312008-09-10   �� 11:13:42 
						

							
English - 2

Using the WISELINK Pro Function
This function enables you to view and listen to photo, music and/or movie files saved on a USB Mass Storage Class (MSC) device.
Entering the WISELINK Pro Menu
1.	Press the MENU button. Press the ▲ or ▼ button to select “Application”, then press the ENTERE button.
2.	Press the ▲ or ▼ button to select “WISELINK Pro”, then press the ENTERE button.
The “WISELINK Pro” menu is displayed.
Press the W.LINK button on the remote control to display the “WISELINK Pro” menu.
Press the SOURCE button on the remote control repeatedly to select “USB”, then press the ENTERE button.
3.	Press the Red button, then press the ▲ or ▼ button to select the corresponding USB Memory Device (i.e. if connected through a hub). Press the ENTERE button.
This function differs depending on the USB Memory Device / DLNA device connected to TV. 
The selected USB device name appears at the bottom left of the screen.
4.	Press the ◄ or ► button to select an icon (Photo, Music, Movie, Setup), then press theMovie, Setup), then press theSetup), then press the ENTERE button. To exit “WISELINK Pro” mode, press the W.LINK button on the remote control.
Removing a USB Memory Device Safely
You can remove the device safely from the TV.
1.	Press the TOOLS button in the WISELINK Pro file list screen, or while a Slide Show, music or movie is being played.
2.	Press the ▲ or ▼ button to select “Remove Safely”, then press the ENTERE button.
3.	Remove the USB device from the TV.
N
O
O
N
N
Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss.
Do not disconnect the USB device while it is loading.
MSC supports MP3 and JPEG files, while a PTP device supports JPEG files only.
The sequential JPEG format is supported.
The higher the resolution of the image, the longer it takes to display on the screen.
The maximum supported JPEG resolution is 15360X8640 pixels.
For unsupported or corrupted files, the ‘Not Supported File Format’ message is displayed.
If the number of photo files exceeds 4000 (or the number of music files exceeds 30 00), any files exceeding the 4000 limit may not be displayed in the Photo List (or Music List).
MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM) is a technology that supports the creation of content, the distribution and manageme nt of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements. 
When moving to a photo, loading may take a few seconds. At this point, the loading icon will appear at the screen. 
N
N
N
N
N
N
N
N
N
N
Photo
SUM Device    Favourites Setting    Select    Jump    Option
image_1.jpgMonth : JanDate : Jan.01.2008Color : GrayComposition : Folder : P-otherFavourites : ★ ★ ★
PreferenceMonthlyTimeline
  Jan  Nov▲
▲ Play Current GroupDeleteInformationRemove Safely
WISELINK Pro
Photo
SUM Device       Return
MusicSetup
PHOTO
SUM851.98MB/995.00MB Free
Movie
TV
SETRESET
VCRDVD STB
TV
SETRESET
VCRDVD STB

BN68-01701B-ENG.indb   322008-09-10   �� 11:13:43 
						

							
English - 

Screen Display
1.	Currently selected file: The currently selected file is highlighted. Photo and movie files are displayed as thumbnail images.
2.	Information Window: Shows information about the currently selected file. There is a separate information window for photo and movie files only. For music files, the file information is also displayed in the location where the file is displayed.
3.	Current Sort Standard: This field shows the current standard for sorting files. Press the ▲ or ▼ button to change the standard for sorting files. 
4.	View Groups: Shows the sorting groups. The sorting group including the currently selected photo is highlighted.
5.	Current Device: Shows the currently selected device name. Press the Red button  to select a device.
6.	Item Selection Information: Shows the number of photos that are selected by pressing the Yellow button.
7.	Help Items 
Red (Device) button: Selects a connected device.
Green (Favourites Setting) button: Changes the favourites setting for the selected file. Press this button repeatedly until the desired value appears.
Yellow (Select) button: Selects file from the file list. Selected files are marked with a symb ol c. Press the yellow button again to cancel a file selection.
πµ (Jump) button: Jumps to the previous sorting group/Jumps to the next sorting group.
TOOLS (Option) button: Displays the option menus. (The option menu changes according to the current status.)
•
•
•
•
•
Using the Remote Control Button in WISELINK Pro Menu
ButtonOperations
▲/▼/◄/►/wheelMove the cursor and select an item.
ENTERE 
Select the currently selected item.
While playing a slide show, movie, or music file:
- Pressing the ENTERE button during play pauses the play.
- Pressing the ENTERE button during pause resumes the play.
∂/∑Play or pause the Slide Show, music or movie.
RETURNReturn to the previous menu.
TOOLSRun various functions from the Photo, Music and Movie menus.
∫Stop the current slide show, Music or Movie file.
π/µJump to previous group/Jump to next group.
INFOShow file information.
W.LINKExit WISELINK Pro mode.
P >/
						

							
English - 4

Using and Sorting Photo List
You can sort photos in the Photo List by a particular standard.
1.	Press the ▲ or ▼ button to select a sorting standard in the Photo list. 
The photos are sorted according to the newly selected sorting standard. \
To move to the previous/next group, press the π (REW) or µ (FF) button.
2.	Press the ∂ (Play)/ENTERE button to start the Slide Show in the order selected by the user.
The information of a photo file is automatically set.
The “Color” and “Composition” information extracted from a photo file may be different from the user’s expectations.
Photo information is automatically set. You can change the “Color”, “Composition”, and “Favourites”.
Photos for which information cannot be displayed are set as “Unclassified”. 
PTP does not support folder sort mode.
Sorting Standard for the Photo List
Monthly
It sorts and shows photos in the file by month. It sorts only by month (from January to December) regardless of year.
Timeline
It sorts and shows photos by date. It sorts by year and month from the earliest photo.
Color
It Sorts photos by color. You can change the photo color information.
“Color” options: Red, Yellow, Green, Blue, Magenta, Black, Gray, Unclassified.
Composition
It Sorts photos by composition. You can change the compositional information of photos.
“Composition” options:  (horizontal),  (vertical),  (object),  (perspective),  (pattern), Unclassified.
Folder
It Sorts photos by folder. If there are many folders in USB, the photos files are shown in order in each folder. The photo file in the Root folder is shown first and the others are shown in alphabetical order by name.
Preference
It Sorts photos by preference (Favourites). You can change the photo preferences.
Changing the Favourites setting Select the desired photo in the Photo list, then press the Green button repeatedly  until the desired setting appears.
“Favourites” options: ★ ★ ★, ★ ★ ★, ★ ★ ★, ★ ★ ★ 
Photo List Option Menu
Slide Show
Using this menu, you can play a SlideShow using the photo files on the USB memory device.
Play Current Group
Using this menu, you can play a SlideShow using only the photo files in the currently selected sorting group.
Delete
Using this menu, you can delete the selected photo files. 
Change Group
You can change the “Color” and “Composition” information of photo files.
The group information of the current file is updated and the file is moved to the new group.
To change the information of multiple files, select the files you want by pressing the yellow button.  
N
N
N
N
N
N
N



N

N


N
N




N
N
Photo
SUM Device    Favourites Setting    Select    Jump    Option
image_1.jpgMonth : JanDate : Jan.01.2008Color : GrayComposition : Folder : P-otherFavourites : ★ ★ ★
PreferenceMonthlyTimeline
  Jan  Nov▲
Photo
SUM Device    Favourites Setting    Select    Jump    Option
image_1.jpgMonth : JanDate : Jan.01.2008Color : GrayComposition : Folder : P-otherFavourites : ★ ★ ★
PreferenceMonthlyTimeline
  Jan  Nov▲
Slide ShowPlay Current GroupDeleteInformation▼

BN68-01701B-ENG.indb   342008-09-10   �� 11:13:44 
						

							
English - 

Information
The photo file information including the name, the size, the resolution, the date modified and the path is displayed.
You can view the information of photo files during a SlideShow using the same procedures.
Alternatively, select a photo from the photo list and press the INFO button to view the information.
Remove Safely
You can remove the device safely from the TV. 

N
O

Viewing a Photo or Slide Show 
Viewing a Slide Show
1.	Press the ◄ or ► button to select the desired photo in the Photo list. 
2.	Press the TOOLS button.
3.	Press the ▲ or ▼ button to select “Slide Show”, then press the ENTERE button.
All files in the photo list will be used for the Slide Show.
During the slide show, files are displayed in order from the currently shown file.
The Slide Show progresses in the order sorted in the Photo list.
Music files can be automatically played during the Slide Show if the “Background Music” is set to “On”. (Refer to page 36).
While a photo list is displayed, press the ∂(Play)/ENTERE button on the remote control to start slide show.
SlideShow Control Buttons
ENTEREPlay/Pauses the Slide Show.∫ Exit Slide Show and return to the photo list. 
∂Play the Slide Show.TOOLSRun various functions from the Photo menus.
∑Pause the Slide Show.π/µChange the SlideShow playing speed.
Playing current group
1.	Press the ▲ or ▼ button to select a sorting standard. (“Monthly”, “Timeline”, “Color”, “Composition”, “Folder”, “Preference”)
2.	Press the π (REW) or µ (FF) button to select the desired group.
3.	Press the TOOLS button.
4.	Press the ▲ or ▼ button to select “Play Current Group”, then press the ENTERE button. 
Only the photos in the sorting group including the selected files will be used for th e Slide Show.
To	perform	a	SlideShow	with	only	the	selected	files
1.	Press the ◄ or ► button to select the desired photo in the Photo list. 
2.		Press the yellow button. Repeat the above operation to select multiple photos. 
The c mark appears to the left of the selected photo.mark appears to the left of the selected photo.
If you select one file, the SlideShow will not be performed.
To deselect all selected files, press the TOOLS button and select “Deselect All”.
3.	Press the ∂ (Play)/ENTERE button.
The selected files will be used for the Slide Show. 
N
N
N
N
O
N
N
N
N
N
N
SUME Pause       Previous       Next       Option       Return  
► Normal	20/22 image_1.jpg 440x440 2.0KB 2008/1/1
TV
SETRESET
VCRDVD STB
TV
SETRESET
VCRDVD STB

BN68-01701B-ENG.indb   352008-09-10   �� 11:13:45 
						

							
English - 

Slide Show Option Menu
Stop Slide Show/Start Slide Show
You can start or stop a SlideShow.
Rotate
You can rotate photos saved on a USB memory device.
Whenever you press the ◄ button, it rotates by 270˚, 180˚, 90˚, and 0˚.
Whenever you press the ► button, it rotates by 90˚, 180˚, 270˚, and 0˚.
If you have select “Zoom”, the “Rotate” deactivated.
Zoom
You can magnify photos saved on a USB memory device. (x1 → x2 → x4)
To move the enlarged photo image, press the ENTERE button, then press the ▲/▼/◄/► buttons. Note that when the enlarged picture is smaller than the original screen size, the location change function doesn’t work.
The enlarged file is not saved.
Slide Show Speed
You can select the slide show speed.
You can select the Slide Show speed only during a slide show.
You can also change the speed of the Slide Show by pressing the π (REW) or µ (FF) button during the Slide Show.
Background Music → On/Off
If you set “Background Music” to On, the background music will be played when viewing photos one by one or in a Slide Show.
If you set “Background Music” to On, a screen appears immediately where you can set the Background Music.
To use this feature, there must be music and photo files stored on the USB device.
Background Music Setting
You can select background music when watching a SlideShow.
If you turn off the “Background Music”, even if the “Background Music Settings” have been set up, the background music will not be played.
Loading music files is needed to change BGM mode. Play music files in music category to load.
BGM Mode → Mood/Selected File/Shuffle
BGM Mood → Energetic/Rhythmical/Sad/Exciting/Calm
If you set “BGM Mode” to “Mood”, you can select a mood.
You cannot select a mood not part of the music files on the USB memory device.
Select Music File
If you set “BGM Mode” to “Selected File”, you can select a music file.
Picture Setting/Sound Setting
Refer to page 42.
Information
The photo file information is displayed.
Remove Safely
You can remove the device safely from the TV. 


N
N
N

N
N

N
N


N
N
•
•
N
N
•
N



ToolsStop Slide ShowRotateZoomSlide Show Speed : NormalBackground Music  : Off Background Music SettingPicture SettingSound SettingInformation
U Move       E Enter       e Exit

BN68-01701B-ENG.indb   362008-09-10   �� 11:13:45 
						

							
English - 

Using and Sorting the Music List
You can sort music files in the Music List by a particular standard.
1.	Press the ▲ or ▼ button to select a sorting standard in the Music list. 
Music files are sorted according to the newly selected sorting standard.
To move to the previous/next group, press the π (REW) or µ (FF) button.
2.	Press the ENTERE button to start playing music in the order selected by the user.
The information of the music files is automatically set.
The “Mood” information extracted from a music file may differ from the expectations of the user.
Music information is automatically set. You can change the “Mood” and “Favourites”.
Music files for which information cannot be displayed are set to “Unclassified”.
If there is no title information for a music file, the filename is displayed.
If no information is available for the Genre, Artist, Album, or Year, the corresponding item is displayed as blank.
Sorting Standard for the Music List
Title: It sorts the Music titles in symbol/Number/alphabet/special order, and shows the music file.
Artist: It sorts the music file by artist in symbol/Number/alphabet/special order.
Mood: It sorts music files by the mood. You can change the music mood information.
“Mood” options: Energetic, Rhythmical, Sad, Exciting, Calm, Unclassified
Genre: It sorts music files by the genre.
Folder: It sorts music files by the folder. If there are many folders in USB, the files are shown in order in each folder. The music file in the Root folder is shown first and the others are shown in alphabetical order by name.
Preference: It sorts music files by preference (Favourites). You can change the music files preferences.
Changing the Favourites setting
Select the desired music file in the Music list, then press the Green button repeatedly until the desired setting appears.
To change the information of multiple files, select files by pressing the yellow button.
“Favourites” options: ★ ★ ★, ★ ★ ★, ★ ★ ★, ★ ★ ★ 
Music List Option Menu
Play Current Group: Using this menu, you can only play music files in the currently selected sorting group.
Delete: Using this menu, you can delete the selected music files.
Change Group: You can change the mood information of music files. The group information of the current file is updated and the file is moved to the new group.
To change the information of multiple files, select files by pressing the yellow button.
Information: The music file information including the name, the size, the date modified and the path is displayed.
You can view the information of music files during a SlideShow using the same procedures.
Alternatively, select a music file from the music list and press the INFO button to view the information.
Remove Safely: You can remove the device safely from the TV.
N
N
N
N
N
N
N
N



N



N
N
N



N

N
O

Music
SUM Device       Favorites Setting       Select      Jump      Option 
PreferenceTitleArtist
Energetic ★ ★ ★
JeeAlbum 12005Pop
Thanks
Sad ★ ★ ★
DarbyAlbum 22005Pop
I Love You
Calm ★ ★ ★
CatherineAlbum 32005Pop
Better than yesterday
 F G H I J  L  P  S  T  V        ▲
Music
SUM Device       Favorites Setting       Select      Jump      Option 
ArtistMoodGenre
Sad ★ ★ ★
JeeAlbum 12005Pop
Thanks
Sad ★ ★ ★
DarbyAlbum 22005Pop
I Love You
Exciting ★ ★ ★
CatherineAlbum 32005Pop
Better than yesterday
 Rhythmical Sad Exciting  Calm  ...       ▲
Play Current GroupDeleteChange GroupInformation▼
TV
SETRESET
VCRDVD STB

BN68-01701B-ENG.indb   372008-09-10   �� 11:13:45 
						

							
English - 

Playing a Music 
Playing	a	music	file
1.	Pressing the ◄ or ► button to select a music file to be played, 
2.	Press the ∂ (Play)/ENTERE button. 
This menu only shows files with the MP3 file extension. Files with other file extensions are not displayed, even if they are saved on the same USB device.π (REW) or µ (FF) buttons do not function during play.
The selected file is displayed at the top with its playing time.
To adjust the music volume, press the volumevolume button on the remote control. To mute the sound, press the MUTE button on the remote control.
The playing duration of a music file may be displayed as ‘00:00:00’ if its playing time information is not found at the start of the file.
If the sound is odd when playing MP3 files, exit WISELINK mode and adjust the “ Equalizer” and “SRS TruSurround XT” in the Sound menu. (An over-modulated MP3 file may cause a sound problem.)
Music Play Control Buttons  
ENTEREPlay/Pauses the music file.∫Exit play mode and return to the music list.
∂Play the music fileTOOLSRun various functions from the Music menus.
∑Pause the music file
Music function information icon 
When all music files in the folder (or the selected file) are repeated. “Repeat Mode ” is “On”.
When all music files in the folder (or the selected file) are played once. “Repeat Mo de” is “Off”.
Playing the music group
1.	Press the ▲ or ▼ button to select a sorting standard. 
 (“Title”, “Artist”, “Mood”, “Genre”, “Folder”, “Preference”)
2.	Press the π (REW) or µ (FF) button to select the desired group. button to select the desired group. 
3.	Press the TOOLS button. 
4.	Press the ▲ or ▼ button to select “Play Current Group”, then press the ENTERE button. 
The music files in the sorting group including the selected file are played.
Playing	the	selected	music	files
1.	Press the ◄ or ► button to select the desired music file in the music list.
2.	Press the yellow button. Repeat the above operation to select multiple music files.
The c mark appears to the left of the selected music file. 
3.	Press the ∂ (Play)/ENTERE button. 
Only the selected file is played.
Music Play Option Menu
Repeat Mode → On/Off
You can play music files repeatedly.
Picture Setting/Sound Setting
Refer to page 42.
Information
The music file information is displayed.
Remove Safely
You can remove the device safely from the TV. 
N
N
N
N
N
N
N
N
N
N
N




SUM Pause       Previous       Next       Option       Return  
	7/14   00:01:15  00:05:41
I Love You
ToolsRepeat Mode ◄ On  ►Picture SettingSound SettingInformationRemove Safely
U Move       L Adjust       e Exit

BN68-01701B-ENG.indb   382008-09-10   �� 11:13:45