Samsung Series 8 User Manual

English - 

Using the Wheel button
To increase the channel number, turn the wheel clockwise when the Channel Display is displayed. To decrease the channel number, turn the wheel counterclockwise. 
To turn the volume up, turn the wheel clockwise when the Volume Control window is displayed. To turn the volume down, turn the wheel counterclockwise.
To move to a lower menu, turn the wheel clockwise when the menu Display is displayed. To move to a higher menu, turn the wheel counterclockwise. 


...

English - 0

Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1.	Press the POWER button on the remote control. The message “Valitse calikkokieli, myymälädemo, kanavat ja kellonaika.” is displayed.
2.	Press the ENTERE button, then “Valitse kuvaruutuvalikon kieli.” menu is automatically displayed. Press the ENTERE button.
3.	Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTERE button to confirm your choice.
4....

English - 

Channel Control
Storing Channels and channel 
Country
Analogue Channel: You can change the country for analogue channels.
Digital Channel: You can change the country for digital channels.
The PIN number input screen appears. Enter your 4 digit PIN number. 
Auto Store
You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers.
Digital &...

English - 2

Manual Store
Scans for a channel manually and stores it in the TV’s memory.
If a channel is locked using the “Child Lock” function, the PIN input window appears.
Digital Channel
Manual store for digital channels. The update procedures differ depending on the selected “Country”. Update the channel list by selecting the appropriate option.
When the “Country” was set to “Finland”
Press the ▲ or ▼ button to select “Cable” or “Air”, then press the ENTERE button.
When selecting “Cable”...

English - 

Default Guide
Mini Guide / Full Guide: You can decide whether to display either the “Mini Guide” or the “Full Guide” when the GUIDE button on the remote control is pressed. 
Channel List
For the detailed procedures on using the “Channel List”, refer to the descriptions on pages 14~15.
Channel Mode
When press the P >/< button, Channels will be switched within the selected channel list.
Added Ch: Channels will be switched within the memorized channel list.
Favourite Ch.: Channels...

English - 4

Managing Channels
Using this menu, you can Add / Delete or set Favourite channels and use the programme guide for digital broadcasts.
Select a channel in the “All Channels”, “Added Channels” or “Favourite” screen by pressing the ▲ / ▼ buttons, and pressing the ENTERE button. Then you can watch the selected channel.
All Channels: Shows all currently available channels.
Added Channels: Shows all added channels.
Favourites: Shows all favourite channels.
Programmed: Shows all current...

English - 

Reserving a programme will be shown on “Programmed” menu.
Digital Programme Guide and Viewing Reservation
When a digital channel is selected, and you press the ► button, the Programme Guide for the channel appears. You can reserve a programme according to the procedures described above.
Edit Channel Name (only analogue channel)
Channels can labeled so that their call letters appear whenever the channel is se lected.
The names of digital broadcasting channels are automatically...

English - 

Sharpness: Adjusts the edge definition of the picture.
Colour: Adjusts colour saturation of the picture.
Tint(G/R): Adjusts the colour tint of the picture.  
Select a picture mode to be adjusted first. The adjusted values are saved for each picture mode.
When you make changes to “Backlight”, “Contrast”, “Brightness”, “Sharpness”, “Colour” or “Tint(G/R)”, the OSD will be adjusted accordingly. 
In Analogue TV, Ext., AV, S-Video modes of the PAL system, you cannot use the “Tint”...

English - 

Picture Options
In PC mode, you can only make changes to the “Colour Tone” and “Size” from among the items in “Picture Options”.
Colour Tone → Cool2 / Cool1 / Normal / Warm1 / Warm2
You can select the most comfortable colour tone to your eyes.
The adjusted values are stored according to the selected “Picture” mode.
“Warm1” or “Warm2” is only activated when the picture mode is “Movie”.
Size
You can select the picture size which best corresponds to your viewing requirements. 
Press...

English - 

HDMI Black Level → Normal / Low
You can directly select the black level on the screen to adjust the screen depth.
This function is active only when the external input connects to HDMI (RGB signals).
100Hz Motion Plus → Off / Low / Medium / High / Demo
Removes drag from fast scenes with a lot of movement to provide a cleare\
r picture.
This function is not available in PC mode.
If you enable “100 Hz Motion Plus”, noise may appear on the screen. If this occurs, set “100Hz Motion...