Samsung SCX 4728FD User Manual

IPv6 configuration
1512.  Using a Network-Connected Machine
Setting IPv6 addresses
The machine supports the following IPv6 addresses for network printing and 
managements.
• Link-local Address : Self-configured local IPv6 address (Address starts with 
FE80).
• Stateless Address : Automatically configured  IPv6 address by a network 
router.
• Stateful Address : IPv6 address configur ed by a DHCPv6 server.
• Manual Address : Manually configured IPv6 address by a user.
DHCPv6 address config uration...

IPv6 configuration
1522.  Using a Network-Connected Machine
7 Enter the rest of the address (e.g.,:3FFE:10:88:194::AAAA. “A” is the 
hexadecimal 0 through 9, A through F).
8 Choose the DHCPv6 configuration.
9 Click the  Apply button.
Using SyncThru™ Web Service
1Start a web browser, such as Inte rnet Explorer, that supports IPv6 
addressing as a URL.
2 Select one of the  IPv6 addresses (Link-local Address , Stateless 
Address , Stateful Address , Manual Address ) from Network 
Configuration Report  (see...

1532.  Using a Network-Connected Machine
Wireless network setup
 
• Make sure your machine supports a wireless network. Wireless network may not be available depending on th e model. (see "Features by models" 
on page 7).
• This features available for SCX-472xW Series  only.
 
12 
Getting started
Understanding your network type
Typically, you can only have one connection between your computer and the 
machine at a time.
Wireless network name and network key
Wireless networks require higher...

Wireless network setup
1542.  Using a Network-Connected Machine
From the computer
From the computer, we recommend using a USB cable with the program 
provided in the supplied software CD 
• See "Setup using Windows" on page 159.
• See "Setup using Maci ntosh" on page 165.
• With a USB cable:  You can simply set up a  wireless network using the 
program on the supplied software  CD. Only Windows and Macintosh 
operating systems are sup ported (see "Setup using Windows" on page 159...

Wireless network setup
1552.  Using a Network-Connected Machine
The Personal Identifica tion Number (PIN) method helps you connect your 
machine to a wireless network by entering the supplied PIN information on a Wi-
Fi Protected Setup™ (WPS)-enabled  access point (or wireless router).
Factory default in your machine is  PBC mode, which is recommended for a 
typical wireless network environment.
 
To change  the WPS mode, press   ( Menu) > Network  >  Wireless  > OK  > 
WPS Setting .
 
Machines with an...

Wireless network setup
1562.  Using a Network-Connected Machine
Machines without an display screen
Connecting in PBC mode
1Press and hold the   (WPS) button on the control panel for about 2 - 4 
seconds until the sta tus LED blinks quickly.
The machine starts connecting to th e wireless network. The LED blinks 
slowly for up to two minutes unti l you press the PBC button on the 
access point (or wireless router).
2 Press the  WPS (PBC)  button on the access point (or wireless router).
a  The light blinks...

Wireless network setup
1572.  Using a Network-Connected Machine
Canceling the connection process
To cancel the wireless network connection when the machine is connecting to 
the wireless network, pr ess and release the   ( Cancel or Stop/Clear ) button 
on the control panel.  You need to wait 2 minuit es to re-connect to the 
wireless network.
Disconnecting from a network
To disconnect the wireless network conn ection, press the   (WPS) button on 
the control panel for  more than two seconds.
• When the...

Wireless network setup
1582.  Using a Network-Connected Machine
4 According to the network you selected, the WLAN  security encryption 
type will be  WEP or WPA.
• In case of  WEP, press the  Open System  or SharedKey .
- Open System: Authentication  is not used, and Encryption 
may or may not be  used, depending on the need for data 
security. Enter the  WEP Key after selecting  Open System.
- SharedKey: Authentication  is used. A device that has a proper 
WEP Key can access th e network. Enter the WEP...

Wireless network setup
1592.  Using a Network-Connected Machine
•WPA-PSK or WPA2-PSK:  You can select WPA-PSK or WPA2-PSK  to 
authenticate the print server based  on WPA Pre-Shared Key. This 
uses a shared secret  key (generally called Pre-Shared Key 
passphrase), which is ma nually configured on the access point and 
each of its clients.
a  Press  OK when  WPA-PSK  or WPA2-PSK  appears of on the 
display.
b  Press  OK to select  TKIP or AES in  Encryption . If you select 
WPA2-PSK , press OK to select...

Wireless network setup
1602.  Using a Network-Connected Machine
4 Select the Wireless Setting and Installation  option.
• Install Now:  If you have already set up th e wireless network, click 
this button to install the machine’s  driver to use the wireless network 
machine. If you have not set up  the wireless network, click the 
Wireless Setting and Installation  button to set up the wireless 
network before you click this button. 
• Wireless Setting and Installation:  Configure the wireless network...